CipherLab 8000 Bedienungsanleitung

Remote Console

For 8 Series Mobile Computers:

8000 / 8200 / 8300 / 8400 / 8500 / 8600 / 8700

Version 1.04

The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided

under a license agreement containing restrictions on use and disclosure and is also

protected by copyright law. Reverse engineering of the software is prohibited.

Due to continued product development this information may change without notice. The

information and intellectual property contained herein is confidential between CIPHERLAB

and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find

any problems in the documentation, please report them to us in writing. CIPHERLAB

does not warrant that this document is error-free.

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photocopying,

recording or otherwise without the prior written permission of CIPHERLAB CO., LTD.

For product consultancy and technical support, please contact your local sales

representative. Also, you may visit our web site for more information.

The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD.

Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and/or other countries.

Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

Other product names mentioned in this manual may be trademarks or registered

trademarks of their respective companies and are hereby acknowledged.

The editorial use of these names is for identification as well as to the benefit of the

owners, with no intention of infringement.

CIPHERLAB CO., LTD.

Website: http://www.cipherlab.com

Version

Date

Notes

1.04 Feb. 02, 2015 

Modified: Manage Rules –

screenshots and descriptions updated

with the Daylight Saving Time (DST) checkbox

1.03 Aug. 20, 2014 

Modified: Change Connection Settings–

update the screenshots

of the Link Properties dialog

1.02 Aug. 15, 2014 

Modified: Manage Rules – update descriptions for “

Send lookup file

to device” sections

1.01 Jun. 18, 2014 

Modified: View Link Status – add notes

for networking through

RS-232, the hourglass icon rotating at the bottom-left for 8600

Modified: Manage Rules – update d

escriptions for Version Control

(lookup & application template)

1.00 Jan. 15, 2014 

Initial release

RELEASE NOTES

CONTENTS

RELEASE NOTES ............................................................................................................................- 3 -

INTRODUCTION ................................................................................................................................. 3

System Requirements....................................................................................................................... 4

Remote Console ................................................................................................................................ 4

Ethernet Connection .................................................................................................................... 5

Menu Bar & Toolbar..................................................................................................................... 5

View Link Status........................................................................................................................... 6

View Received Files...................................................................................................................... 9

View Device Information ............................................................................................................12

Change Connection Settings .....................................................................................................14

Change Data File Settings .........................................................................................................17

Manage Devices.........................................................................................................................20

Manage Rules ............................................................................................................................25

Remote Console enables a Windows-based PC (host) to retrieve data files and/or

lookup files from one or more mobile computers (clients), especially through LAN

(Ethernet).

Save for Ethernet, Remote Console now gets tweaked for more communicative

interfaces. Update your Batch AG to the latest release to get the interface supports of

RS232, IrDA, USB Virtual COM, Cradle IR, and Modem-Com.

This manual provides users with a comprehensive guide to Remote Console for 8-Series

Mobile Computers by relating the approaches while interspersing the examples for

various applications. We recommend that you read the document thoroughly before use

and keep it at hand for quick reference.

Thank you for choosing CipherLab products!

INTRODUCTION

Remote Console User Guide

SYSTEM REQUIREMENTS

To run the program, one of the Windows operating systems is required:

Windows 2000

Windows XP

Windows Vista

Windows 7

REMOTE CONSOLE

Remote Console is a Windows service known as long-running application that can run in

the background. Once Remote Console is launched, you can find its icon in the

bottom-right corner of the screen as the picture shown below.

Remote Console auto-starts each time you start your computer. And once data transfer

occurs, Link Status and File Status are able to be viewed, as shown below:

Toolbar

Menu Bar

Link Status

File Status

Introduction

ETHERNET CONNECTION

If you choose to network with Ethernet, an Ethernet Cradle is necessary for the mobile

computer to team up with. Then set up the following:

On the mobile computer, set the output interface to “Ethernet Cradle” by user

application main menu | 3. Utilities | 1. Program Settings | 1. Upload Interface.

Set the Ethernet Cradle to work in Data Mode and configure correct IP and port

number of the host computer. (See Ethernet Cradle Guides.)

On the host computer, run Batch AG to enable Remote Console Data Transfer on

the Remote Console Settings window. See the BATCH AG user guide.

On the host computer, run Batch AG to disable or Enable Auto Update on the

Remote Console Settings window. See the BATCH AG user guide.

On the host computer, from the menu bar of Batch AG, select Transfer | Remote

Console Data Transfer to launch Remote Console.

MENU BAR & TOOLBAR

File Menu

Open

Opens a selected data file.

Save As

Saves a selected data file to a different file path.

Rename

Renames a selected data file.

Delete File

Deletes a selected data file.

Remove from List

Removes a selected data file from the file list.

Convert

Converts a selected data file to Excel file format.

Exit

Closes Remote Console application.

Link Menu

Start

Starts a Remote Console service session, throughout which the

mobile computer periodically updates data to the host computer

until one of the following comes up:

Remote Console service session stops (The Stop button

is pressed).



Client mobile computer(s) quit uploading data.

Restart Re-starts Remote Console service session.

Remote Console User Guide

Stop

Stops Remote Console service session.

Information Menu

Device Information

Gets system information about a specific mobile computer.

System Menu

System menu items are only available when Remote Console service is put to stop.

Link Properties

Configures link properties.

File Properties

Configures file properties.

Device Maintenance Manages devices.

Rule Maintenance Manages rules.

Help Menu

About

RemoteConsole

Views the information about the Remote Console program.

VIEW LINK STATUS

Link Status delivers a few pieces of information about Ethernet networking and also

about the mobile computer that is sending in data at the moment.

Whichever the interface is, Link Status can be viewed in the RemoteConsole window

at the right pane. The following describes how to view Link Status when interfaces are

different:

BY ETHERNET

Once Ethernet connection is up between Ethernet Cradle and host computer, Link

Status can be viewed by the approach below:

In the left pane of RemoteConsole window, click Links to highlight it. The right pane

will show these pieces of info:

Ethernet Cradle IP

Ethernet Cradle MAC Address

Andere Handbücher für 8000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CipherLab PDA Handbücher

CipherLab

CipherLab 9500CE Series Bedienungsanleitung

CipherLab

CipherLab 8200-CP Bedienungsanleitung

CipherLab

CipherLab 97 Series Bedienungsanleitung

CipherLab

CipherLab 8000 Bedienungsanleitung

CipherLab

CipherLab 8600 Bedienungsanleitung

CipherLab

CipherLab 8000 Bedienungsanleitung

CipherLab

CipherLab RS36 Bedienungsanleitung

CipherLab

CipherLab Series 8 Bedienungsanleitung

CipherLab

CipherLab RK25 Bedienungsanleitung

CipherLab

CipherLab CP60 Bedienungsanleitung

CipherLab

CipherLab CP30 Series Bedienungsanleitung

CipherLab

CipherLab 8400 Series Bedienungsanleitung

CipherLab

CipherLab RK25 Bedienungsanleitung

CipherLab

CipherLab 8500 Series Bedienungsanleitung

CipherLab

CipherLab CP50 G Bedienungsanleitung

CipherLab

CipherLab RK25 Bedienungsanleitung

CipherLab

CipherLab 9400 Series Bedienungsanleitung

CipherLab

CipherLab RS50 Bedienungsanleitung

CipherLab

CipherLab 8600 Bedienungsanleitung

CipherLab

CipherLab RS35 Bedienungsanleitung

CipherLab

CipherLab 8500 Series Bedienungsanleitung

CipherLab

CipherLab RS35 Bedienungsanleitung

CipherLab

CipherLab RK95 Bedienungsanleitung

CipherLab

CipherLab 8200-CP Bedienungsanleitung

Beliebte PDA Handbücher anderer Marken

SPOT

SPOT SPOT Bedienungsanleitung

Palm

Palm handheld Bedienungsanleitung

Winmate

Winmate E500QK Bedienungsanleitung

Getac

Getac PS236 Bedienungsanleitung

Sharp

Sharp CE-1600P Bedienungsanleitung

HTC

HTC PHAR100 Bedienungsanleitung

Mindeo

Mindeo M40 Bedienungsanleitung

Acer

Acer n30 Bedienungsanleitung

ASCOM

ASCOM 9D24 EX Bedienungsanleitung

Unitech

Unitech PA520BTNF Bedienungsanleitung

HandHeld

HandHeld Nautiz X3 Bedienungsanleitung

Casio

Casio PALM Bedienungsanleitung

Sharp

Sharp TM-20 Kurzanleitung

Atid

Atid AT870 Bedienungsanleitung

AML

AML M7225 Bedienungsanleitung

Audiovox

Audiovox Maestro Technisches Handbuch

Casio

Casio PV-750 Plus Gebrauchsanweisung

Unitech

Unitech PT630 Bedienungsanleitung