CipherLab CPT-8020 Bedienungsanleitung
Cipher Lab Portable Data Terminals
For Use By Customers
The instructions below pertain to using the Cipher
Lab portable data terminal (models CPT-8020 and
CPT-8021).
Note that the:
• BS (backspace) key can be pressed to
correct typing errors.
• FN Alpha key can be pressed to enter
capital and lowercase letters.
To enter an order:
1. At the MAIN MENU screen, press 1 (ORDER).
2. Press a blue key when the This will start a new order. OK? message appears (or the
OPEN screen appears).
3. If the ENTER ROUTE # screen appears:
• Type a route number, and press a blue key, or
• Press a blue key without entering a new route number.
Users must enter LABEL for the route number when using the Cipher Lab unit to
create a batch of retail shelf labels for printing.
4. To add items to the order:
• Type an item number, and press a blue key, or
• Scan the item's barcode while pressing the yellow key.
5. Type the order quantity. If scanning items, the order quantity will increase with
repeated scans. If the item was previously entered, the new order quantity will be
added to the current order quantity.
6. Press a blue key.
7. Press the ESC key when the order is complete.
8. Press a blue key when the Finished with order? message appears.
9. When the ENTER MESSAGE screen appears either press a blue key to add a
message to the order, or press the ESC key to close the ENTER MESSAGE screen.
10. Press a blue key when the TOTAL COUNT screen appears.
To send all entered orders:
1. At the MAIN MENU screen, press 3 (SEND DATA).
2. Attach the unit's microphone to the telephone's mouthpiece and dial the telephone
number before pressing a blue key.
3. When the Was transmission good? message appears, press a blue key (for yes) or
the ESC key (for no).
4. If the Retry? message appears, press a blue key (for yes) or the ESC key (for no).
Cipher Lab Portable Data Terminals
For Use By Customers
To erase all entered orders:
1. At the MAIN MENU screen, press 4 (ERASE DATA).
2. Press a blue key (for yes) or the ESC key (to cancel) when the Data will be erased
Are you sure? message appears.
3. If the Warning Data files not sent! message appears, press a blue key to delete the
unsent files, or press the ESC key (to cancel).
To add items to an existing order:
1. At the MAIN MENU screen, press 1 (ORDER). The OPEN screen appears.
2. Press 2 (EXISTING ORDER). The ORDER LIST screen appears.
3. Press the up and down arrows to locate the order, and press a blue key.
4. To add items to the order:
• Type an item number, and press a blue key, or
• Scan the item's barcode while pressing the yellow key.
5. Type the order quantity. If scanning items, the order quantity will increase with
repeated scans. If the item was previously entered, the new order quantity will be added
to the current order quantity.
6. Press a blue key.
7. Press the ESC key when the order is complete.
8. Press a blue key when the Finished with order? message appears.
9. When the ENTER MESSAGE screen appears either press a blue key to add a
message to the order, or press the ESC key to close the ENTER MESSAGE screen.
10. Press a blue key when the TOTAL COUNT screen appears.
To change the order quantity of an item:
1. At the MAIN MENU screen, press 2 (REVIEW/EDIT). The ORDER LIST screen
appears.
2. Press the up and down arrows to locate the order, and press a blue key. The
REVIEW/EDIT screen appears.
3. Press 1 (FIRST ITEM) or 2 (LAST ITEM) to open the order at the first or last item.
4. To locate the desired item, press the up and down arrows, or press 3 (Src), type the
item's number and press a blue key.
5. Press 1 (Ed), type the order quantity, and press a blue key.
6. If no other changes are needed, press the ESC key.
7. Press a blue key when the TOTAL COUNT screen appears.
Cipher Lab Portable Data Terminals
For Use By Customers
To delete an item from an order:
1. At the MAIN MENU screen, press 2 (REVIEW/EDIT). The ORDER LIST screen
appears.
2. Press the up and down arrows to locate the order, and press a blue key. The
REVIEW/EDIT screen appears.
3. Press 1 (FIRST ITEM) or 2 (LAST ITEM) to open the order at the first or last item.
4. To locate the desired item, press the up and down arrows, or press 3 (Src), type the
item's number and press a blue key.
5. Press 2 (Del) and press a blue key when the Item will be deleted Are you sure?
Message appears. If the REVIEW HEADER screen appears, press the ESC key and a
blue key to return to the MAIN MENU screen.
6. Press the ESC key to close the REVIEW screen.
7. Press a blue key when the TOTAL COUNT screen appears.
To change the message of an order:
1. At the MAIN MENU screen, press 2 (REVIEW/EDIT). The ORDER LIST screen
appears.
2. Press the up and down arrows to locate the order, and press a blue key. The
REVIEW/EDIT screen appears.
3. Press 4 (EDIT MESSAGE). The MESSAGE screen appears.
4. Type the new message, and press a blue key.
5. Press a blue key when the TOTAL COUNT screen appears.
To change the customer number or route number of an order:
1. At the MAIN MENU screen, press 2 (REVIEW/EDIT). The ORDER LIST screen
appears.
2. Press the up and down arrows to locate the order, and press a blue key. The
REVIEW/EDIT screen appears.
3. Press 3 (ORDER HEADER). The REVIEW HEADER screen appears.
4. Press 1 (Ed). The MODIFY HEADER screen appears.
5. If desired, type a new customer number.
6. Press a blue key.
7. If desired, type a new route number.
8. Press a blue key. The REVIEW HEADER screen appears.
9. Press the ESC key to close the REVIEW HEADER screen.
10. Press a blue key when the TOTAL COUNT screen appears.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CipherLab Touch-Terminal Handbücher
CipherLab
CipherLab HERA51 Bedienungsanleitung
CipherLab
CipherLab 8500 Series Bedienungsanleitung
CipherLab
CipherLab 256 Series Bedienungsanleitung
CipherLab
CipherLab 97 Series Bedienungsanleitung
CipherLab
CipherLab RS51 Bedienungsanleitung
CipherLab
CipherLab 8500 Series Bedienungsanleitung
CipherLab
CipherLab 9700A Bedienungsanleitung
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung