Circutor PVS2 Bedienungsanleitung

INSTALLATION GUIDE

(M273A01-03-19A)

Canopies

PVS2

Installation Guide

SAFETY PRECAUTIONS

DISCLAIMER

CIRCUTOR, SA reserves the right to make modi cations to the device or the unit speci ca-

tions set out in this instruction manual without prior notice.

CIRCUTOR, SA on its web site, supplies its customers with the latest versions of the device

speci cations and the most updated manuals.

www.circutor.com

CIRCUTOR, recommends using the original cables and accessories that are

supplied with the device.

DANGER

Warns of a risk, which could result in personal injury or material damage.

ATTENTION

Indicates that special attention should be paid to a speci c point.

Follow the warnings described in this manual with the symbols shown below.

If you must handle the unit for its installation, start-up or maintenance, the following

should be taken into consideration:

Incorrect handling or installation of the unit may result in injury to personnel as well as damage

to the unit. In particular, handling with voltages applied may result in electric shock, which may

cause death or serious injury to personnel. Defective installation or maintenance may also

lead to the risk of  re.

Read the manual carefully prior to connecting the unit. Follow all installation and maintenance

instructions throughout the unit’s working life. Pay special attention to the installation stan-

dards of the National Electrical Code.

Refer to the instruction manual before using the unit

In this manual, if the instructions marked with this symbol are not respected or carried out correctly, it can

result in injury or damage to the unit and /or installations.

CIRCUTOR, SA reserves the right to modify features or the product manual without prior noti cation.

Installation Guide

PVS2

CONTENTS

SAFETY PRECAUTIONS �� 3

DISCLAIMER �� 3

CONTENTS�� 4

REVISION LOG�� 6

1�- WARRANTY CERTIFICATE FOR THE CANOPIES �� 7

2�- FORESEEABLE MISUSE�� 8

3�- PVS2 MODELS�� 9

4�- COMPONENTS�� 11

4�1�- FEET AND WINGS �� 12

4�2�- BEAMS, PROFILES AND FASTENING OF MODULES �� 13

5�- PREPARATION OF THE INSTALLATION�� 14

5�1�- STUDY INTO THE ELECTRICAL PROJECT�� 14

5�1�1�- STANDARD INSTALLATION WITH RECHARGE POINT IN START FOOT �� 14

5�1�2�-STANDARD INSTALLATION WITH RECHARGE POINT IN START AND END FOOT�� 14

5�1�3�- MAJOR INSTALLATION �� 15

5�1�4�- INTERNAL CONNECTION OF FEET�� 15

5�2�- PREPARATION OF FOOTINGS�� 16

5�3�- EARTH CONNECTION�� 17

5�4�- ASSEMBLE TEMPLATES�� 17

5�5�- FILLING THE FOOTINGS �� 18

5�6�- REMOVE UPPER TEMPLATE �� 18

6�- ASSEMBLY OF FEET AND WINGS �� 19

6�1�- FOOT INSTALLATION (A) �� 19

6�2�- FOOT INSTALLATION (B) �� 20

6�3�- INSTALLATION OF FEET REINFORCEMENT�� 21

6�4- INSTALLATION OF WINGS (A) �� 22

6�5- ALIGNMENT OF THE FEET�� 23

7�- ASSEMBLY OF BEAMS�� 24

7�1- FITTING OF ANGLES �� 24

7�2- BEAM ANGLES�� 25

7�3 - FITTING OF BEAMS �� 26

7�4 - INSTALLATION OF EARTHING POINT �� 27

8�- PROFILES AND MODULES�� 28

8�1 - INTERMEDIATE PROFILES �� 28

8�2 - FINAL PROFILES�� 28

8�3 - PREPARATION OF PROFILES �� 29

8�4 - FITTING OF INTERMEDIATE PROFILES (1) �� 30

8�5 - FITTING OF INTERMEDIATE PROFILES (2) �� 31

8�6 - FITTING OF FINAL PROFILES (3) �� 32

8�7 - FITTING OF FINAL PROFILES (4) �� 33

8�8 - SETTING MODULES A �� 34

8�9 - SETTING MODULES B �� 35

8�10 - CONNECTION OF STRINGS �� 36

9�- FINAL FOUNDATIONS�� 37

10�- INSTALLATION OF THE CHARGER �� 38

11�- USAGE AND MAINTENANCE �� 40

11�1 - INSTALLATION�� 40

11�1�1�- ASSEMBLY ACCORDING TO MANUFACTURER SPECIFICATIONS �� 40

11�1�2�- DIFFICULTIES AND VARIATIONS DURING ASSEMBLY �� 40

11�1�3�- BONDING OF PARTS AND TIGHTENING TORQUE �� 40

11�1�4�- FOUNDATIONS, ALIGNMENT AND LEVELLING OF THE CANOPIES �� 40

11�1�5�- LOCATION AND CHARACTERISTICS OF THE INSTALLATION ZONE�� 40

11�2 - USE AND UPKEEP�� 41

11�2�1�- STRUCTURAL ELEMENTS MUST NOT BE MODIFIED�� 41

11�2�2�- USAGE OVERLOAD INDICATED IN THE PROJECT MUST NOT BE EXCEEDED �� 41

11�2�3�- THE ORIGINAL STATUS OF THE ELEMENTS OF THE CANOPY CANNOT BE MODIFIED �� 41

11�2�4�- AVOID THE CONTACT OF THE STEEL WITH OXIDISING OR AGGRESSIVE ELEMENTS�� 41

11�3 - REVISION AND MAINTENANCE �� 42

11�3�1�- GENERAL CONDITIONS �� 42

PVS2

Installation Guide

11�3�2�- REVISION AND MAINTENANCE TASKS�� 42

11�3�3�- CASES THAT INVOLVE SPECIAL REVIEWS�� 43

12�- MAINTENANCE AND TECHNICAL SERVICE��44

Installation Guide

PVS2

REVISION LOG

Table 1: Revision log�

Date Revision Description

08/19 M273A01-01-19A Initial version

Note : The images of the devices are for illustrative purposes only and may differ from the

original device.

PVS2

Installation Guide

1�- WARRANTY CERTIFICATE FOR THE CANOPIES

10 year Warranty for defects in materials or manufacturing aws

CIRCUTOR hereby guarantees, for a period of 10 years, from the date of delivery to the buyer,

that its canopies are free of any defect in their materials or manufacture that hinder their normal

operation under proper conditions of usage, installation and maintenance.

If, at any time, during the period of validity of this guarantee, the appearance of defects in

their materials or their manufacture occurs, CIRCUTOR undertakes to replace the defective

structure.

The guarantees contained in this Certicate will be provided by CIRCUTOR subject to the

general terms and conditions expressed below:

Exclusions and Limitations of Guarantees

Those damages and faults established herein will be exempt from the warranty rights whenever

these arise from:

1�- Accidents or negligent, improper or unsuitable use.

2�- Failing to respect the installation, usage and maintenance instructions set forth.

CIRCUTOR reserves the right to supply a different model of structure to handle the accepted

warranty claims, for replacement or expansion, in the event that the original model was no

longer manufactured.

Admitted usage

This type of canopy is a metallic structure with two basic functions:

 To support a cover of photovoltaic solar modules or thermal solar panels, for the production

of running or hot water respectively.

To protect motor vehicles, motorcycles, bicycles, people, etc. from the sun and the rain under

the cover.

Installation Guide

PVS2

2�- FORESEEABLE MISUSE

This type of canopy is not intended to:

 To withstand overloads higher than those indicated in the corresponding certicate of

technical characteristics, due to meteorological conditions (snow and wind) of the site and the

own weight of the solar panels.

 People will not be allowed to climb onto the canopy, with the exception of those who access

it to carry out maintenance and assembly tasks. No more than one person with their personal

work material (100 kg) may climb onto the canopy.

It is not allowed to cover the sides, front or rear with any type of enclosure that wholly or

partially prevents the passage of the wind.

 The installation of posters or jutting elements is not allowed, nor in general, any added

element that increases the surface exposed to the wind.

 Only the assembly of original parts and components supplied by CIRCUTOR is allowed.

CIRCUTOR will not be held liable for any unauthorised modication to the canopy, once the

same has been put into service.

 If a wall is installed along the entire length of the canopy, a special study will be required to

vary the coefcient of obstruction contemplated in the calculation.

Figure 1: Variation of the obstruction coefcient.

 If the canopy is installed in the vicinity of a height change or on a steep wall or mound that

increases the height of the canopy above the ground level to more than 3 m in height at the

centre point of the roong, a special study will be required owing to the modication of the

pressure and suction coefcients considered in the calculation.

PVS2

Installation Guide

3�- PVS2 MODELS

PVS2-2

3 5 17

2578

11°

PVS2-3

3 5 17

2578

11°

PVS2-4

3 5 17

2578

11°

PVS2-5

3 5 17

2578

11°

PVS2-6

3 5 17

2578

11°

PVS2-8

3 5 17

2578

11°

PVS2-10

3 5 17

2578

11°

Figure 2: PVS2 models�

Installation Guide

PVS2

Table 2: PVS2 models�

Model Length kWp Modules Feet

PVS2-2 5,0 m 4,20 kWp 15 1

PVS2-3 8,0 m 6,72 kWp 24 2

PVS2-4 10,0 m 8,40 kWp 30 2

PVS2-5 13,0 m 10,92 kWp 39 2

PVS2-6 15,0 m 12,60 kWp 45 3

PVS2-8 20,0 m 16,80 kWp 60 3

PVS2-10 25,0 m 21,00 kWp 75 4

PVS2

Installation Guide

Andere Handbücher für PVS2

Inhaltsverzeichnis

Andere Circutor Zelt Handbücher

Circutor

Circutor PV2 Series Bedienungsanleitung

Circutor

Circutor PVS2 Bedienungsanleitung

Beliebte Zelt Handbücher anderer Marken

OZTENT

OZTENT JV SIGNATURE EDITION Bedienungsanleitung

GigaTent

GigaTent Summer Chalet Mini Tent Bedienungsanleitung

Coleman

Coleman 2000007827 Handbuch

ShelterLogic

ShelterLogic 107153 Bedienungsanleitung

Outsunny

Outsunny 84C-230 Bedienungsanleitung

Napier

Napier SPORTZ COVE 61 Series Bedienungsanleitung

EuroTrail

EuroTrail ATLANTIS PRO Bedienungsanleitung

Reimo

Reimo Marina Bedienungsanleitung

TiiTENT

TiiTENT TB300 Bedienungsanleitung

Coleman

Coleman 2000033134 Installationsanleitung

Ozark Trail

Ozark Trail W784.1 Kurzanleitung

SlingFin

SlingFin CrossBow 2 Bedienungsanleitung

Coleman

Coleman 9600-141 Bedienungsanleitung

Palram

Palram Arizona 5000 Wave - WINGS Bedienungsanleitung

COVERPRO

COVERPRO 56184 Montageanleitung

Vango

Vango Zenith 100 Bedienungsanleitung

Costway

Costway PATIOJOY OP70818 Bedienungsanleitung

Clarke

Clarke PUC 88 Bedienungsanleitung