CIS VCC-GC10V31L Kurzanleitung

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
1
22mm cubic VGA
PoCL-Lite B/W CMOS Camera
VCC-GC10V31L
Product Specification
& Operational Manual
CIS Corporation
En
g
lish

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
2
Table of Contents
1. Scope of Application...............................................................................................................................3
2. Handling Precautions .............................................................................................................................3
3. Product Outline......................................................................................................................................4
4. Specification..........................................................................................................................................5
4.1. General Specification .......................................................................................................................5
4.2. Camera Output Signal Specification.....................................................................................................7
4.3. CCD Spectral Response (Representative value).....................................................................................7
5. Function Settings...................................................................................................................................8
6. External Connector Pin Assignment.........................................................................................................9
7. Timing Chart........................................................................................................................................10
7.1. Horizontal Synchronous Signal Timing................................................................................................10
7.2. Vertical Synchronous Signal Timing....................................................................................................10
7.2.1. Full Frame Scan Mode....................................................................................................................10
7.2.2. Partial Scan Mode..........................................................................................................................11
7.3. Fixed Trigger Shutter Mode...............................................................................................................12
7.4. Pulse Width Trigger Shutter Mode......................................................................................................13
8. Remote Interface Function ...................................................................................................................14
9. Initial Settings.....................................................................................................................................15
10. CCD Optical Axis Accuracy..................................................................................................................16
11. Dimensions........................................................................................................................................17
12. Cases for Indemnity (Limited Warranty)...............................................................................................18
13. Sensor Pixel Defect ............................................................................................................................19
14. Product Support.................................................................................................................................19

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
3
1. Scope of Application
This is to describe VCC-GC10V31L, Power over Camera Link-Lite B/W CMOS Camera. All specifications
contained herein are subject to change without prior notice. Reproduction in whole or in part is prohibited.
2. Handling Precautions
The camera must not be used for any nuclear equipments or aerospace equipments with which mechanical
failure or malfunction could result in serious bodily injury or loss of human life. Our warranty does not apply to
damages or defects caused by irregular and/or abnormal use of the product.
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.
zDo not use or store the camera in the following extreme conditions:
¾Extremely dusty or humid places.
¾Extremely hot or cold places (operating temperature –5 to +45 )℃℃
¾Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.
¾Places subject to fluorescent light reflections.
¾Places subject to unstable (flickering, etc.) lighting conditions.
¾Places subject to strong vibration.
zRemove dust or dirt on the surface of the lens with a blower.
zDo not apply excessive force or static electricity that could damage the camera.
zDo not shoot direct images that are extremely bright (e.g., light source, sun, etc.), and when camera
is not in use, put the lens cap on.
zFollow the instructions typeapter 6, “External connector pin assignment” for connecting the camera.
Improper connection may cause damages not only to the camera but also to the connected devices.
zConfirm the mutual ground potential carefully and then connect the camera to monitors or computers.
AC leaks from the connected devices may cause damages or destroy the camera.
zDo not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power supply
voltage may cause damages or malfunction of the camera.
zThe voltage ripple of camera power DC +12V±10% shall be within ±50mV. Improper power
supply voltage may cause noises on the video signals.
In case of abnormal operation, contact the distributor from whom you purchased the product.

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
4
3. Product Outline
VCC-GC10V31L is an industrial B/W digital video camera module utilizing a 1/3 type, global shutter type, CMOS.
At Full Frame Scan Mode, entire pixels can be read out within approx. 1/60s. Interface of GC10V31L complies
with a camera link standard, (the one to be determined as PoCL-Lite).
Key Features
□ PoCL-Lite Camera.
□ Only 22mm3in size (excluding projection), light weight 19g, and speed makes it a best match for
use in embedded systems.
□ Only 0.65W with power consumption.
□ Camera settings can be changed via serial communications.
□ OFF ~1/30,000s shutter speed can be set with fixed trigger.
□ OFF ~1/40,000s shutter speed can be set with pulse width trigger.
□ Full frame scan mode and three partial scan modes can be set.
Optional accessory
□ NF – C mount Adaptor Ring

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
5
4. Specification
4.1. General Specification
Item Specification
Pickup device
Device Type 1/3 type B/W CMOS, Aptina MT9V024IA7XTM
Effective Pixel Number 752(H) x 480 (V)
Unit Cell Size 6.0μm (H) x 6.0μm (V)
Chip Size 4.51mm (H) x 2.88mm (V)
Video output frequency
Pixel Clock 24.5454 MHz
Horizontal Frequency 31.468 kHz Pixel Clock: 780 CLK
Vertical Frequency
Full Frame Scan Mode: 480H, 59.94 Hz
1/2Partial Scan Mode: 240H, 120.11 Hz
1/4Partial Scan Mode: 120H, 240.22 Hz
1/6Partial Scan Mode: 80H, approx 361.71 Hz
Sync. system Internal Sync. System
Video output standard Camera Link
Resolution 480 TV lines
Resolving power 10bit
Sensitivity F5.6 400 lx (Shutter 1/60s, Gain 0dB)
Minimum illumination F1.4 1 lx (Shutter 1/60s, Gain +12dB)
Dust or stains in
optical system
No dust or stain shall be detected on the testing screen with setting the camera
aperture at F16.
Power requirements DC +12V ±10%
Power consumption 0.65 W (DC +12V IN)
Dimension Refer to overall dimension drawing (Clause 11)
22mm x 22mm x 22mm (excluding projection)
Mass Approx. 19 g
Lens mount NF mount (Refer to overall dimension drawing)
Optical axis accuracy Refer to drawing for CCD Optical Axis Accuracy (Clause 10)
Gain variable range 0 ~+12dB (Guaranteed range)
Gamma 1 (Fixed)
Shutter speed
variable range
Fixed Shutter: 1/60(OFF), 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000,
1/10,000, 1/30,000s
Pulse Width Shutter: 1/2,000 ~1/40,000s
Manual Shutter: 1/60(OFF) ~1/30,000s
Trigger shutter mode ・Standard Trigger Shutter Mode ・Pulse Width Trigger Shutter Mode

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
6
Item Specification
Safety/Quality
standards
UL: Conform to UL Standard including materials and others.
RoHS: Conform to RoHS
CE: Emission: EN55022: 2006 (Class B)
Immunity: EN61000-6-2: 2005
FCC: To be applied.
Durability
Vibration
Acceleration 98 m/s2(10.0G)
Frequency 20~200 Hz
Direction XYZ 3 directions
Testing time 120 min for each direction
Shock No malfunction shall be occurred with 490m/s2(100G) for ±X,
±Y, and ±Z, 6 directions. (without package)
Operation environment
Temperature Operation guaranteed: -5℃~+45℃
Performance guaranteed: 0℃~+40℃
Humidity RH 20~80% with no condensation
Storage environment Temperature -25℃~+60℃
Humidity RH 20~80% with no condensation

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
7
4.2. Camera Output Signal Specification
Item Specification
Video
output data
Video out 648 (H) x 480 (V) At Full Frame Scan Mode
Sync.
Signal I/O
LVAL output LVDS Camera Link connector
FVAL output LVDS
DVAL output LVDS
HD/VD input None
Trigger
input
Polarity POSI/NEGA Selectable
Pulse width 22ms ~500μs
Camera Link input LVDS: CC1 input
Serial
Communication
SerTC LVDS
SerTFG LVDS
Video
output
signal
White Clip Level Digital 10bit : 3FEh
Setup Level Digital 10bit : 08 ±0h
Dark Shading Digital 10bit : Under 1Ch for both horizontal and vertical
5 seconds shall be waited after turning on power to get proper camera operation.
4.3. CCD Spectral Response (Representative value)
※ Lens characteristics and illuminant characteristics are not considered.

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
8
5. Function Settings
Camera functions can be set with serial data communications.
Function Address Data
Gain 001 0: 0 dB
1: + 6 dB
2: + 12 dB
3: Manual Gain (Refer to address 008.)
E-Shutter 002 0: 1/60s(OFF) : 522 H (Line numbers for exposure time)
1: 1/120s : 262 H
2: 1/250s : 126 H
3: 1/500s : 63 H
4: 1/1000s : 32 H
5: 1/2000s : 16 H
6: 1/4000s : 8 H
7: 1/10000s : 3 H
8: 1/30000s : 1 H
16: Manual Shutter (Refer to address 009&010.)
T
ri
gg
er Shutter Mode 004 0: Normal Shutter Mode (
T
ri
gg
er OFF)
1: Fixed Tri
gg
er Shutter Mode
(Shutter speed can be set with address 002.)
2: Pulse Width Tri
gg
er Shutter Mode
(Shutter speed can be set with tri
gg
er pulse width.)
Scan Mode 005 0: Full Frame Scan Mode
1: 1/2 Partial Scan Mode (Effective are lines: 121~360)
2: 1/4 Partial Scan Mode (Effective are lines: 181~300)
3: 1/6 Partial Scan Mode (Effective are lines: 200~280)
4: 1/2 Partial Scan Manual Start Position Mode
(Refer to address 006&007.)
5: 1/4 Partial Scan Manual Start Position Mode
(Refer to address 006&007.)
6: 1/6 Partial Scan Manual Start Position Mode
(Refer to address 006&007.)
Partial Scan
Manual Start Position 006 &
007 4~404: 1 ~401 lines
※
T
he data of address 005 shall be 004 ~006.
Address 006 MSB and Address 007 LSB make 6bit in total.
Effective Area Start Position = (006&007)
–
3
1/2 Scan Partial Mode Effective Data : 4 ~244
1/4 Scan Partial Mode Effective Data : 4 ~364
1/6 Scan Partial Mode Effective Data : 4 ~404
Manual Gain Control 008 0~32: 0 ~12dB ※Address 001 data shall be 003.

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
9
Function Address Data
Manual Shutter Control 009&
010
4~525: 1/60(OFF) ~1/30,000s
Normal Shutter Mode (When address 004 data is 000)
1/2 Scan Partial Mode Effective Data : 270 ~525
1/4 Scan Partial Mode Effective Data : 414 ~525
1/6 Scan Partial Mode Effective Data : 462 ~525
※Address 002 data shall be 016.
Address 009 MSB and Address 010 LSB make 16bit in total.
Trigger Polarity
011 0: Positive Input
1: Ne
g
ative Input
Flip Mode 013
0: Normal output mode
1: Vertically inverted output mode
2: Horizontally inverted output mode
3: Vertically and Horizontally inverted output mode
Data Save 015 Input 083 to save address 000 ~014 to EEP-ROM.
6. External Connector Pin Assignment
14 pins PoCL-Lite Camera Link Connector 12214-1100-00PL (3M)
Pin No. In/Out Signal
1 Vcc
2 SerTC+
3 X0-
4 X2-
5 Xclk-
6 CC1-(Trigger IN -)
7 GND
8 GND
9 SerTC-
10 X0+
11 X2+
12 Xclk+
13 CC1+(Trigger IN +)
14 Vcc
1
8
7
14

VCC-GC10V31L Rev.900-685-31-00
©2009 CIS Corporation. All rights reserved.
10
LVAL Output
Video Output
DVAL Output
FVAL Output
1 2 3 4 5 40 41 42 43 45 47 48
(SensorReadOut)
45H
Total=525H
46 49 50 51 52 53 54 55 56 57 12
480H(ActiveLine)
(Exposure Time)
44 525
52452252351751851952052158525
524
7. Timing Chart
7.1. Horizontal Synchronous Signal Timing
7.2. Vertical Synchronous Signal Timing
7.2.1. Full Frame Scan Mode
LVAL Output
132 CLK
Video Output
DVAL Output
FVAL Output
780 CLK
648 CLK
CLK 24.545MHz
23 CLK
132 CLK
(1H = 31.78μs)
Inhaltsverzeichnis
Beliebte Steuereinheit Handbücher anderer Marken

Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation
JS Automation MPC3034A Bedienungsanleitung

JAUDT
JAUDT SW GII 6406 Series Kurzanleitung

Spektrum
Spektrum Air Module System Bedienungsanleitung

BOC Edwards
BOC Edwards Q Series Bedienungsanleitung











