Cisco ANT-4G-OMNI-OUT-N Bedienungsanleitung

326

Cisco Systems, Inc. www.cisco.com

Cisco Outdoor Omnidirectional Antenna for

2G/3G/4G Cellular

(ANT-4G-OMNI-OUT-N)

The Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular antenna is designed to cover domestic

LTE700/Cellular/PCS/AWS/MDS, WiMAX 2300/2500, and GSM900/GSM1800/UMTS/LTE2600 bands. This document provides

the antenna specifications and mounting instructions.

CAUTION: Read the information in Safety Warnings before installing or replacing antennas.

This chapter covers the following topics:

Technical Specifications

Antenna Kit

Safety Warnings

Antenna Installation

Obtaining Documentation and Submitting a Service Request

Technical Specifications

The Outdoor Omnidirectional antenna features the following:

UV stable radome

Mast mount bracket

Covers all cellular 2G, 3G and 4G LTE bands in the following frequency ranges: 698-960 MHz, 1448-1511 MHz and

1710-2700 MHz

327

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

Figure 1 Outdoor Omnidirectional Antenna

RF Specifications

12x drain slot

Specification Description

Frequency ranges 698 to 960 MHz

1480 to 1511 MHz

1710 to 2170 MHz

2300 to 2700 MHz

Nominal gain (dBi) 698 to 960 MHz: 1.5 dBi

1448 to 1511 MHz: 2 dBI

1710 to 2700 MHz: 3.5 dBi

3 dB beamwidth (E plane) 698 to 960 MHz: 81 degrees

1480 to 1511 MHz: 78 degrees

1710 to 2170 MHz: 75 degrees

2300 to 2700 MHz: 100 degrees

3 dB beamwidth (H plane) 360 degrees, omnidirectional

300661

25.7

249

25.4 0.3

328

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

Efficiency Antennas were designed and tested to high RF efficiency in

all supported cellular bands. Detailed technical

specifications can be obtained through your Cisco

authorized partner or Cisco account representative.

Polarization Vertical, linear

Normal impedance 50 ohms

VSWR < 2.5:1 (698 to 960 MHz)

< 1.5:1 (1448 to 1511 MHz)

< 2.0:1 (1710 to 2690 MHz)

Radiation Pattern Omnidirectional

Specification Description

329

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

Mechanical Specifications

Radiation Patterns

Specification Description

Mount style Mast mount, upright position only, connector on

bottom (due to drain holes located only on antenna

bottom)

Environment Outdoor IP55 with drain holes

Connector N-Type female

Antenna length (height) 9.8” x 1” (24.9 cm x 2.45 cm)

Weight 1.5 lbs (.68 kg)

Dimensions (height x outside dimensions) 9.8” x 1” (248 x 24.5 mm)

Operating temperature range -22 to 158-degrees F (-30 to +70-degrees C)

Storage temperature -40 to 185 degrees F (-40 to 85 degrees C)

Maximum power 10 watts

Radome Polycarbonate, UV, white

Material substance compliance ROHS compliant

330

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

331

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

332

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

Antenna Kit

The contents of the multi-purpose integrated antenna are listed in Table 1:

Safety Warnings

WARNING: Avoid using or servicing any equipment that has outdoor connections during an electrical storm.

There may be a risk of electric shock from lightning. Statement 1088

WARNING: Do not work on the system, or connect or disconnect cables, during periods of lightning activity. Statement 1001

WARNING: Do not locate the outdoor antenna near overhead power lines or other electric light or power circuits, or where it can

come into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits,

as they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local

codes (for example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada:Canadian Electrical Code, Section 54).

Statement 1052

WARNING: This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of

a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain

that suitable grounding is available. Statement 1024

WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

Table 1 Antenna Kit Contents

Quantity Description

1 Antenna-mount bracket

4 1/4”-20x3/4 carriage bolt

6 1/4”-20 hex nut

6 1/4”-20 spring lock washer

6 1/4”-20 flat washer

2Pipeclamps

1 ANT-4G-OMNI-OUT-N Antenna

333

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

WARNING: To report a gas leak, do not use a telephone in the vicinity of the leak. Statement 1039

WARNING: This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any

equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing

accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety

warnings that accompanied this device. Statement 1071. SAVE THESE INSTRUCTIONS.

WARNING: This product is not intended to be directly connected to the Cable Distribution System. Additional regulatory

compliance and legal requirements may apply for direct connection to the Cable Distribution System. This product may connect

to the Cable Distribution System ONLY through a device that is approved for direct connection. Statement 1078

Safety Precautions

WARNING: Installation of this antenna near power lines is dangerous. For your safety, follow the installation directions.

Each year hundreds of people are killed or injured when attempting to install an antenna. In many of these cases, the victim was

aware of the danger of electrocution, but did not take adequate steps to avoid the hazard.

For your safety, and to help you achieve a good installation, please read and follow these safety precautions. They may save

your life!

For your safety, read and follow these safety precautions.

If you are installing an antenna for the first time, for your own safety as well as others, seek professional assistance. Your

Cisco sales representative can explain which mounting method to use for the size and type antenna you are about to install.

Before you install an antenna, contact your Cisco account representative to explain which mounting method to use for the

size and type of antenna that you are about to install.

Find someone to help you—installing an antenna is often a two-person job.

Select your installation site with safety, as well as performance, in mind. Remember that electric power lines and phone

lines look alike. For your safety, assume that any overhead line can kill you.

Contact your electric power company. Tell them your plans and ask them to come look at your proposed installation.

Plan your installation carefully and completely before you begin. Each person involved in an installation should be assigned

to a specific task, and should know what to do and when to do it. One person should be in charge of the operation to issue

instructions and watch for signs of trouble.

When installing your antenna, follow these guidelines:

—Do not use a metal ladder.

—Do not work on a wet or windy day.

—Do dress properly—wear shoes with rubber soles and heels, rubber gloves, and a long-sleeved shirt or jacket.

If the assembly starts to drop, move away from it and let it fall. Because the antenna, mast, cable, and metal guy wires are

all excellent conductors of electrical current, even the slightest touch of any of these parts to a power line completes an

electrical path through the antenna and the installer.

If any part of the antenna system should come in contact with a power line, do not touch it or try to remove it yourself. Call

your local power company to have it removed safely.

If an accident should occur with the power lines, call for qualified emergency help immediately.

334

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

Antenna Installation

The antenna installation includes the following procedures:

Tools and Equipment Required

Installing the Antenna

Tools and Equipment Required

In addition to the parts included in the antenna kit described in the section Antenna Kit, you must provide the following tool to

install the antenna on the router:

A flathead screwdriver

3/4 in. open-end wrench

NOTE: This list does not include the tools and equipment required to assemble and erect the tower, mast, or other structure you

intend to mount your antenna on.

Installing the Antenna

The antenna is provided with a mounting kit consisting of a mounting bracket and hose clamp. This kit allows you to mount the

antenna to masts from 1.25 inches (3.2 centimeters) to 2 inches (5.1 cm). Cisco recommends that a 1.5 inch (3.8 centimeter)

or larger tubing mast be used.

The antenna is vertically polarized. Since the antenna has vertical gain, it is very important to mount the antenna in a vertical

(not leaning) position for optimal performance.

Follow these steps to mount the antenna onto a mast:

1. Place the connector end of the antenna through the hole in the antenna bracket.

335

Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)

2. Place the pipe clamps into the grooves on the bracket.

3. Attach the bracket to the top of the mast. The top surface of the mounting mast must not exceed the top surface of the

mounting bracket. Securely tighten hose clamps.

4. Route the cable to the router and attach the cable to the antenna port of the router.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly

What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

1Outdoor omnidirectional antenna 2Aluminum pipe/mast—31.8 mm to 54.0 mm mast

diameter. (For optimum performance, mast height

should sit lower than aluminum tube)

3Antenna bracket 4Flat washer

5Lock washer 6Hex nut

7Carriage bolt 8Pipe clamps

300642

Inhaltsverzeichnis

Andere Cisco Antenne Handbücher

Cisco

Cisco AIR-ANT5195P-R - Aironet Antenna Bedienungsanleitung

Cisco

Cisco Firepower 1120 Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2513P4M-N Bedienungsanleitung

Cisco

Cisco 3G Omnidirectional Outdoor Antenna - 3G Omnidirectional Outdoor... Bedienungsanleitung

Cisco

Cisco Multiband Diversity Omnidirectional Ceiling-Mount Antenna... Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2012 Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2414S-R Bedienungsanleitung

Cisco

Cisco Multiband Swivel-Mount Dipole Antenna... Bedienungsanleitung

Cisco

Cisco AIR-ANT2451NV-R Kurzanleitung

Cisco

Cisco HGA9N - Small Business HighGain Omni-Directional... Bedienungsanleitung

Cisco

Cisco AIRANT2524DWR Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2588P3M-N Merkblatt

Cisco

Cisco FM TUBE Handbuch

Cisco

Cisco Aironet AIR-ANT25137NP-R Bedienungsanleitung

Cisco

Cisco Aironet 2 dBi Diversity Omnidirectional Ceiling Mount Antenna... Bedienungsanleitung

Cisco

Cisco ANT-4G-PNL-OUT-N Bedienungsanleitung

Cisco

Cisco Multiband Wall-Mount Antenna AIR-ANTM5560P-R Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2566D4M-R Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2410Y-R Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT5114P2M-N Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2568VG-N Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2465P-R Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2513P4M-N Bedienungsanleitung

Cisco

Cisco Aironet AIR-ANT2506 Bedienungsanleitung

Beliebte Antenne Handbücher anderer Marken

Alfa Network

Alfa Network APA-L01 Bedienungsanleitung

Naval

Naval PR-422CA Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung

TERK Technologies

TERK Technologies TV44 Bedienungsanleitung

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung

HP J8999A Bedienungsanleitung

MobilSat

MobilSat MSP-S Bedienungsanleitung

Steren

Steren ANT-UHF 13 Bedienungsanleitung

Novatel

Novatel 600-G Bedienungsanleitung

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Bedienungsanleitung

TRENDnet

TRENDnet TEW-AO12O Bedienungsanleitung

Radio Shack

Radio Shack 15-1837 Bedienungsanleitung

CommScope

CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics DAP25 Bedienungsanleitung

COBHAM

COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch

Trango Systems

Trango Systems AD900-9 Bedienungsanleitung

Steren

Steren ANT-100 Bedienungsanleitung

IWCS

IWCS iriBelt II Einrichtungshandbuch