Cisco MX300 G2 Bedienungsanleitung

Installing Cisco TelePresence MX300 G2 - Wheel Base

This installation guide covers MX300 G2 with a wheel base.

Dimensions

Height: 1606mm / 63.3 in.

Width: 1278mm / 50.4in.

Depth: 755mm / 29.8in.

Weight total: 47 kg / 104 lb

Weight monitor: 35kg / 78lb

Manpower

Two people working together are required to mount the

monitor to the base module.

Room setup

Explore the Meeting Room – London scenario on the Cisco Project

Workplace, http://www.cisco.com/go/projectworkplace, to find

inspiration and guidelines when preparing your office or meeting

room for video conferencing.

Documentation

The user documentation for this product, including compliance

and safety information, is available on the Cisco web site,

http://www.cisco.com/go/mx-docs

Installing Cisco TelePresence MX300 G2 - Wheel Base

• Wheel base

• Column

• Screws for mounting the base

• Screwdriver

Back cover

Monitor

Accessories:

• Microphones

• Cables

• Screws for mounting

the monitor

• Gloves

Touch controller

Installing Cisco TelePresence MX300 G2 - Wheel Base

Optional

It is possible to replace the wheels with rubber pads.

The rubber pads are kept underneath the wheel base,

and must be moved to their correct position.

M5x8 (Allen key, 3 mm)

1Mounting the wheel base

You may place the column on the empty

wheel base box as illustrated. Then it is

easier to enter the screws from below.

4 ×

4 × M6x20

Installing Cisco TelePresence MX300 G2 - Wheel Base

2Mounting the monitor

The monitor may be tilting slightly

forward. If you gently pull it to a vertical

position, the screws enter more easily.

Front

Use gloves when

handling the monitor.

Remove the cable

channel lid for now.

You need it in step 4.

4 × M6x16

Installing Cisco TelePresence MX300 G2 - Wheel Base

3Connecting the cables

Thread the cables up

through the hole in the base.

For maintenance only

Reset to factory settings

Audio line output

Always use the provided power cable.

The wall socket outlet must be easily

accessible after installation.

Power switch

Audio line input

LAN **

Video input

(e.g. PC *)

Video output

(e.g. 2nd display *)

Power (100-240 VAC,

50/60 Hz)

Microphones

Touch

controller **

USB, for future use

HDMI

DVI-I

*Optional

** Use the cable that is labeled

with for the Touch controller;

use the cable that is labeled

with for the LAN

Installing Cisco TelePresence MX300 G2 - Wheel Base

• Connect to power and LAN/Ethernet.

• Switch on the system. The power switch is placed

next to the power connector at the rear side of the

system.

Wait while the unit starts up. Normally this takes a few minutes.

It may include automatic software upgrade and restart of the

Touch controller.

• If prompted, follow the instructions on the Touch controller to

set the language etc.

• If your system is not set up to be automatically provisioned, you

must configure the system before you can make your first call.

This is described in the Getting Started Guide, which is available

on the Cisco web site.

Never move the camera manually when power is switched on;

always use the camera control function on the Touch controller

to change the camera position.

5Starting up the system

Snap on the cable

channel lid for strain relief.

Lead the cables out at the

front or back as appropriate.

4Snapping on the cable channel lid

Installing Cisco TelePresence MX300 G2 - Wheel Base

On our web site you will find an overview of the

worldwide Cisco contacts.

Go to: http://www.cisco.com/web/siteassets/contacts

Corporate Headquarters

Cisco Systems, Inc.

170 West Tasman Dr.

San Jose, CA 95134 USA

EMC Class A declaration

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the

user may be required to take adequate measures.

声

明

此为

A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种

情况下，可能需要用户对其干扰采取切实可行的措施。

WARNING: This is a class A product. In a domestic environment

this product may cause radio interference in which case the user

may be required to take adequate measures.

6Mounting the back cover

Wind up the cables on the hook on

the back cover when rolling the unit.

Lift this handle to

lock/unlock the back

cover. Use both

hands if required.

Andere Handbücher für MX300 G2

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco TelePresence MX300 Service-Handbuch

Cisco

Cisco SX80 Service-Handbuch

Cisco

Cisco Quick Set C20 Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C90 Bedienungsanleitung

Cisco

Cisco TelePresence CE9.12 Bedienungsanleitung

Cisco

Cisco Webex Room Kit Mini Bedienungsanleitung

Cisco

Cisco SX80 Service-Handbuch

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence IX5000 Bedienungsanleitung

Cisco

Cisco Spark Room 55 Bedienungsanleitung

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco IP Conference Station 7935 Bedienungsanleitung

Cisco

Cisco TelePresence Profile Series Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C40 Service-Handbuch

Cisco

Cisco Webex Share Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Bedienungsanleitung

Cisco

Cisco TelePresence SX20N Bedienungsanleitung

Cisco

Cisco TelePresence IX5000 Bedienungsanleitung

Cisco

Cisco 3515 MCU12 Installations- und Betriebshandbuch

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Bedienungsanleitung

Cisco

Cisco TelePresence MX700 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Service-Handbuch

Cisco

Cisco TelePresence DX70 Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung