Cisco TelePresence SX20 Bedienungsanleitung

Cisco TelePresence SX20 Quick Set

Easy Setup Guide

1 Connecting Equipment

2 Using TRC6 Remote Control

3 Using Setup Assistant

4 Finding IP address

5 Using Web Interface

6 Configuring Direct IP Address Calls

You can easily set up

your SX20 Quick Set

in this step-by-step guide

Connecting Equipment

Before you begin the installation, make sure that you have the following equipment:

●SX20 Codec

●Power Supply and Power Cable

●Ethernet Cable for LAN

●Codec Wall Mounting Kit (optional)

●Camera (Precision 40 or PrecisionHD 12x)

●Camera Cable

●Camera Mounting Bracket (optional)

●Table Microphone 20 (1 default and 1 optional)

●Microphone Extension Cable (optional)

●TRC6 Remote Control and two AAA Batteries

●Touch 10 Controller (optional)

●Monitor or Projector

●Loudspeaker (external or built-in to the monitor)

●HDMI Cable for Monitor (1 default)

●PC

●VGA to DVI-A Cable for PC Connectivity (optional)

●HDMI to DVI-D Cable for PC Connectivity (optional)

Make sure that all units are switched off when connecting or disconnecting devices.

1-1 Before You Begin

1-2 Connecting Cables

1If connecting an external loudspeaker, please take care to use an active speaker

(built-in amplifier). Use an ungrounded (floating) speaker to avoid ground loop

noise.

2Connect one or two microphones to your codec.

3Connect the codec to LAN/Ethernet.

4Connect your primary display to the blue colored HDMI socket. With the dual dis-

play option, connect the second display to the other HDMI output.

5Connect your camera to the codec.

6Connect a PC (video and audio) to be able to share presentations (locally, or with

remote participants).

7Always use the provided power supply.

Connect all cables as illustrated.

1 2 3 4 5

Cisco TelePresence SX20 Quick Set Easy Setup Guide

1Connecting Equipment

Using TRC6 Remote Control

Using Setup Assistant

When you pick up the remote control, the system wakes up.

Use the [Cursor] controls to move about the screen and press [OK/Enter] to open

the selected menu field. Use the [Cancel] key to exit a menu (and return to the

Home screen) undoing any changes. Use the [Back] key to go just one step back.

Make sure the remote control has working batteries (2 x AAA batteries).

When you start the system for the first time, the setup assistant starts automatically.

Navigate through the setup with either a remote control or from the touch touch

controller.

1 2 3

4 5 6

7 8 9

*0#

pqrs tuv wxyz

defabc

ghi jkl mno

Volume control and

Increase/Decrease control

Field selector/

Cursor keys

Go back one step Microphone

mute/unmute

Reject incoming call /

End call / Cancel /

Back to Home

screen (outside calls)

Place call /

Accept incoming call

OK/Enter

Keypad

1Select [Get started].

2Select [Other services].

If your system is automatically

provisioned, the IP and provi-

sioning settings are automati-

cally configured and the setup

assistant skips these steps. Skip

to ❿.

MEMO

This guide doesnʼt cover information on Cisco Spark registered systems. For more information

on Cisco Spark room systems, visit:

https://help.webex.com/community/cisco-cloud-collab-mgmt

Cisco TelePresence SX20 Quick Set Easy Setup Guide

3Using Setup Assistant

3Choose provisioning infra-

structure.

If you choose [Advanced setup],

the device skips registration to a

call service, and you must reg-

ister the system from the sys-

temʼs web interface. Skip to ❿.

4If you choose [CUCM], en-

ter the required informa-

tion.

5Select [Apply] and skip to

❿.

Contact your Cisco Unified

Communications Manager

(UCM) administrator to get the

information needed.

6If you choose [Edge], enter

the required information.

7Select [Apply] and skip to

❿.

Contact your Cisco Unified

Communications Manager

(UCM) administrator to get the

information needed.

8If you choose [Edge], enter

the required information.

9Select [Apply].

Contact your VCS provider to

get the information needed.

10 Select [Change Timezone]

and set your region, time

zone, and time format.

11 Select [Confirm].

1110

12 Set the screen resolution

according to what your

screen supports.

If your screen is black or flick-

ering, you can set the resolution

to a lower setting. Only the set-

tings supported by your screen

are available are selectable on

the setup assistant.

13 Select [Confirm].

Cisco TelePresence SX20 Quick Set Easy Setup Guide

3Using Setup Assistant

14 Set the position where the

camera is by default when

the system wakes up.

With either the remote control

or touch controller, adjust the

camera position with the pan

and tilt wheel, and the zoom

buttons.

15 Press [OK/Enter].

16 Adjust the volume.

Use the remote control or touch

controller to set the default sys-

tem volume, and the ringtone

volume for your device.

17 Select [Confirm].

Finding IP address

You have to use the remote control or touch controller for the configurations, until

you know your systemʼs IP address.

If you know the IP address, you can configure your system through its web interface

on your web browser.

1Navigate to upper left cor-

ner of the screen and press

[OK/Enter] on the remote

control.

2Navigate down to [Sys-

tem Information] and press

[OK/Enter].

You can find the IP address.

Caution

If your network does not have a DHCP server, or uses MAC address filtering, the system ad-

dress is not automatically assigned. Please contact your network administrator.

Cisco TelePresence SX20 Quick Set Easy Setup Guide

4Finding IP address

Configuring Direct IP Address Calls

Using Web Interface

Without a provisioning system, you must configure each video system individually.

To be able to make calls, you must set the IP address, if not provided by the net-

work, and SIP/H.323 parameters.

In general, we recommend you to use the web interface to administer and maintain

the system. The web interface is the administration portal for the system. You can

connect from a computer and administer the system remotely. It provides full con-

figuration access and offers tools and mechanisms for maintenance.

The web interface is organized in sub-pages. All sub-pages shown below are

available if the video system is registerd to an on-premise service (CUCM, VCS);

the pages shown in grey color are not available if the video system is registered to

the Cisco cloud service (Cisco Spark).

1Launch a Web browser

and enter the IP address

into the address bar, then

press [Enter] key.

2Enter your [user name] and

[passphrase].

The default user name is [ad-

min] with no passphrase set.

3Click [Sign In].

Main menu

Setup

Conguration

Status

Peripherals

Personalization

Favorites

Call ControlHome Security

Users

Access PIN

Server Certicates

CUCM Certicates

Certicate Authorities

Strong Security Mode

Non-persistent Mode

Maintenance

Diagnostics

System Logs

Call Logs

User Interface Screenshots

Software Upgrade

Option Keys

Backup and Restore

System Recovery

Restart

Integration

In-Room Control

Startup Scripts

Developer API

1Click [Setup].

2Click [Configuration].

3Click [Conference].

454In the [DefaultCall] section,

select [H323] from the

[Protocol] drop down list.

5Click [Save].

Cisco TelePresence SX20 Quick Set Easy Setup Guide

6Configuring Direct IP Address Calls

6Click [Network Services].

10 Click [H323].

7Select [On] from the [H323

Mode] drop down list.

8Select [Off] from the [SIP

Mode] drop down list.

9Click [Save].

11 Select [Direct] from the

[CallSetup Mode] drop-

down list.

12 Select [Static] from the [b.

PortAllocation] drop down

list.

13 If you use a NAT router,

enter the configured H323

NAT address in the [Ad-

dress] field.

Define the external/global IP

address to the router with NAT

support. Packets sent to the

router will then be routed to the

system.

14 Select [On] from the

[Mode] drop down list.

15 Click [Save].

Caution

In the router, the following ports must be routed to the systemʼs IP address:

・

Port 1720

・

Port 5555-6555

・

Port 2326-2487

Cisco TelePresence SX20 Quick Set Easy Setup Guide

6Configuring Direct IP Address Calls

To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the

word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

■Product Documentation

●Cisco TelePresence SX Series

http://www.cisco.com/go/sx-docs

Appendix Where to Go From Here

Andere Handbücher für TelePresence SX20

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco 3500 MCU Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Service-Handbuch

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C40 Service-Handbuch

Cisco

Cisco Webex Room Kit Pro Bedienungsanleitung

Cisco

Cisco EX60 Service-Handbuch

Cisco

Cisco EX90 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Bedienungsanleitung

Cisco

Cisco EX90 Bedienungsanleitung

Cisco

Cisco UNIFIED COMMUNICATIONS UC320W Bedienungsanleitung

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Einrichtungshandbuch

Cisco

Cisco TelePresence System 3200 Bedienungsanleitung

Cisco

Cisco TelePresence Bedienungsanleitung

Cisco

Cisco TelePresence MX300 Bedienungsanleitung

Cisco

Cisco 8865 Bedienungsanleitung

Cisco

Cisco TelePresence SX20 Montageanleitung

Cisco

Cisco Quick Set C20 Montageanleitung

Cisco

Cisco TelePresence System Codec C60 Bedienungsanleitung

Cisco

Cisco Webex Room Kit Mini Bedienungsanleitung

Cisco

Cisco Webex Room 70D Bedienungsanleitung

Cisco

Cisco Webex DX70 Bedienungsanleitung

Cisco

Cisco DX series Bedienungsanleitung

Cisco

Cisco Desk Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung