Cisco C170 Bedienungsanleitung

303357

Cisco C170

Security

Appliance

QUICK START GUIDE

Cisco C170 Email Security Appliance

1Welcome

2Before You Begin

3Document Network Settings

4Plan the Installation

5Install the Appliance in a Rack

6Plug In the Appliance

7Temporarily Change Your IP Address

8Connect to the Appliance

9Power Up the Appliance

10 Log In to the Appliance

11 Run the System Setup Wizard

12 Run the Active Directory Wizard (Optional)

13 Configure Network Settings

14 Configuration Summary

15 You’re Done!

16 Where to Go from Here

C170_QSG.fm Page 1 Wednesday, March 13, 2013 9:31 PM

Revised: March 13, 2013

Part Number: 78-19640-04

1 Welcome

Thank you for choosing the Cisco C170 Email Security

Appliance (Cisco C170).

The Cisco C170 appliance is designed to serve as your SMTP

email gateway at your network perimeter—that is, the first

appliance with an IP address that is directly accessible to the

Internet for sending and receiving email. Many of the features

(including reputation filtering, data loss prevention, content

scanning, spam detection, and virus protection) require you to

install the Cisco appliance into your existing network

infrastructure.

This guide describes how to physically install your Cisco C170

appliance and use the System Setup Wizard to configure basic

settings.

C170_QSG.fm Page 2 Wednesday, March 13, 2013 9:31 PM

2 Before You Begin

Before you begin the installation, make sure that you have the

items needed.

The following items are included with the Cisco C170 Email

Security Appliance:

• Quick Start Guide (this guide)

• Rails and adaptor kit

• Power cable(s)

• Ethernet cable for connecting the appliance to your

network

• Regulatory Safety and Compliance Information

You will need to provide the following items yourself:

• Rack cabinet enclosure (if rack-mounting the appliance)

• Phillips-head screwdriver for assembling rails

• 10/100 Gigabit Base-T TCP/IP LAN

• Desktop or laptop computer

• Web browser (or SSH and terminal software)

• Network and administrator information for the “Document

Network Settings” section on page 4 and “go live”

configuration

C170_QSG.fm Page 3 Wednesday, March 13, 2013 9:31 PM

3 Document Network Settings

Before you begin, write down the following information about

your network and administrator settings.

System Settings

Default System Hostname:

Email System Alerts To:

Deliver Scheduled Reports To:

Time Zone Information:

NTP Server:

Admin Password:

SenderBase Network Participation: Enable/Disable

AutoSupport: Enable/Disable

Network Integration

Default Gateway (router) IP Address:

DNS (Internet or specify own):

Interfaces

IP Address:

Network Mask:

Fully Qualified Hostname:

Accept Incoming Mail Domain:

Accept Incoming Mail Destination:

Relay Outgoing Mail:

IP Address:

Network Mask:

Fully Qualified Hostname:

Accept Incoming Mail Domain:

Accept Incoming Mail Destination:

Relay Outgoing Mail:

Message Security

SenderBase Reputation Filtering: Enable/Disable

Cisco Anti-Spam Scanning Engine: Enable/Disable

McAfee Anti-Virus Scanning Engine: Enable/Disable

Sophos Anti-Virus Scanning Engine: Enable/Disable

Virus Outbreak Filters: Enable/Disable

C170_QSG.fm Page 4 Wednesday, March 13, 2013 9:31 PM

4 Plan the Installation

To defend your email system against spam, viruses, phishing,

and other threats, the Cisco C170 appliance must be installed at

the perimeter of your network. It needs to be the first appliance

with an IP address that can access the Internet.

Plan for your network configuration to look something like this:

Firewall or Router

Cisco C170

Mail Server

Clients

303354

Cisco C170

Security

Appliance

C170_QSG.fm Page 5 Wednesday, March 13, 2013 9:31 PM

5 Install the Appliance in a Rack

Install the Cisco C170 Email Security Appliance using either the

slide rails or fixed rack mount brackets. For information about

these installation options, see the Cisco 170 Series Hardware

Installation Guide.

Appliance Placement in a Rack

• Ambient Temperature—To prevent the appliance from

overheating, do not operate it in an area that exceeds an

ambient temperature of 104°F (40°C).

• Air Flow—Be sure that there is adequate air flow around

the appliance.

• Mechanical Loading—Be sure that the appliance is level

and stable to avoid any hazardous conditions.

CiscoC170

Web

Security

Appliance

104

303363

Temperature Limits

C170_QSG.fm Page 6 Wednesday, March 13, 2013 9:31 PM

6 Plug In the Appliance

Plug the female end of the power cable into the power supply on

the back panel of the appliance. Plug the male end into an

electrical outlet.

7JZ78-004E

P1 P2CONSOLE

303358

Plug the C170 power cable

into an electrical outlet.

C170_QSG.fm Page 7 Wednesday, March 13, 2013 9:31 PM

7 Temporarily Change Your IP

Address

To connect to the Cisco C170 appliance, you must temporarily

change the IP address of your computer.

Note Make a note of your current IP configuration settings

because you will need to revert to these settings after

you finish the configuration.

For Windows

Step 1 Go to the Start menu and choose Control Panel.

Step 2 Double-click Network and Sharing Center.

Step 3 Click Local Area Connection and then click Properties.

Step 4 Select Internet Protocol (TCP/IP) and then click

Properties.

Step 5 Select Use the Following IP Address.

Step 6 Enter the following changes:

• IP Address: 192.168.42.43

• Subnet Mask: 255.255.255.0

• Default Gateway: 192.168.42.1

Step 7 Click OK and Close to exit the dialog box.

C170_QSG.fm Page 8 Wednesday, March 13, 2013 9:31 PM

For Mac

Step 1 Launch the Apple menu and choose System Preferences.

Step 2 Click Network.

Step 3 Select the network configuration with the green icon.

This is your active connection. Then click Advanced.

Step 4 Click the TCP/IP tab and from Ethernet settings,

choose Manually from the drop-down list.

Step 5 Enter the following changes:

• IP Address: 192.168.42.43

• Subnet Mask: 255.255.255.0

• Router: 192.168.42.1

Step 6 Click OK.

C170_QSG.fm Page 9 Wednesday, March 13, 2013 9:31 PM

8 Connect to the Appliance

The Cisco C170 appliance has two gigabit network ports:

P1 and P2. At least one static IP address is required to send and

receive email.

You can receive and deliver email from a single connection to

either network port if your network topology dictates it. Two IP

addresses can be configured on one network interface.

Or, you can connect the P1 network port to your public network

and connect the P2 network port to your private network.

To access the appliance by Ethernet, connect to P1 as your

management interface and configure incoming email on P2.

Or, for serial access to the appliance, connect to the console

port.

7JZ78-004E

P1 P2CONSOLE

P1 P2

P1:

Management: 192.168.42.42

Connect the P1 port

to your computer using

an Ethernet cable.

P2:

Incoming Email

Connect the P2 port

to your network using

an Ethernet cable.

303356

C170_QSG.fm Page 10 Wednesday, March 13, 2013 9:31 PM

Inhaltsverzeichnis

Andere Cisco Firewall Handbücher

Cisco

Cisco ASA 5512-X Handbuch

Cisco

Cisco 5510 - ASA SSL / IPsec VPN Edition Bedienungsanleitung

Cisco

Cisco Meraki MX100 Bedienungsanleitung

Cisco

Cisco 881W - Integrated Services Router Wireless Bedienungsanleitung

Cisco

Cisco S190 Bedienungsanleitung

Cisco

Cisco ASA 5506-X Bedienungsanleitung

Cisco

Cisco PIX 506E - Security Appliance Bedienungsanleitung

Cisco

Cisco ASA 5550 Series Bedienungsanleitung

Cisco

Cisco M190 Bedienungsanleitung

Cisco

Cisco Small Business RV220W Bedienungsanleitung

Cisco

Cisco 2100 Series Bedienungsanleitung

Cisco

Cisco 515E - PIX Restricted Bundle Bedienungsanleitung

Cisco

Cisco S195 Handbuch

Cisco

Cisco Small Business RV215W Bedienungsanleitung

Cisco

Cisco PIX 501 Bedienungsanleitung

Cisco

Cisco 5505 - ASA Firewall Edition Bundle Bedienungsanleitung

Cisco

Cisco Firepower 1100 Bedienungsanleitung

Cisco

Cisco 5505 - ASA Firewall Edition Bundle Bedienungsanleitung

Cisco

Cisco ASA 5506-X Montageanleitung

Cisco

Cisco ASA 5585-X Bedienungsanleitung

Cisco

Cisco 5505 - ASA Firewall Edition Bundle Bedienungsanleitung

Cisco

Cisco IronPort M1070 Bedienungsanleitung

Cisco

Cisco FMC 1600 Handbuch

Cisco

Cisco IronPort C370 Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung

GTA

GTA GB-200 Bedienungsanleitung

Trend Micro

Trend Micro Deep Edge Bedienungsanleitung