Cisco M195 Handbuch
Cisco Content Security Management Appliance M195, M395, M695,
and M695F Hardware Installation Guide
First Published: 2019-07-08
Last Modified: 2019-08-06
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,
INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH
THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,
CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of
the UNIX operating system. All rights reserved. Copyright ©1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS.
CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network
topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional
and coincidental.
All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version.
Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com
go trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any
other company. (1721R)
©2019 Cisco Systems, Inc. All rights reserved.
CONTENTS
Overview 1
CHAPTER 1
Features 1
Package Contents 4
Serial Number Locations 4
Front Panel 6
Front Panel LEDs 8
Rear Panel 11
Rear Panel LEDs 14
Power Supply 15
Hardware Specifications 16
Product ID Numbers 17
Power Cord Specifications 18
Installation Preparation 27
CHAPTER 2
Installation Warnings 27
Safety Recommendations 28
Maintain Safety with Electricity 29
Prevent ESD Damage 29
Site Environment 30
Site Considerations 30
Power Supply Considerations 30
Rack Configuration Considerations 31
Rack-Mount the Chassis 33
CHAPTER 3
Unpack and Inspect the Chassis 33
Rack-Mount the Chassis 33
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
iii
Maintenance and Upgrade 37
CHAPTER 4
Power Button Shut Down 37
Enable RPC 38
Reset the Chassis Remotely 39
Install/Uninstall the Locking Faceplate 39
Remove and Replace a Drive 40
Remove and Replace a Power Supply 43
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
iv
Contents
CHAPTER 1
Overview
•Features, on page 1
•Package Contents, on page 4
•Serial Number Locations, on page 4
•Front Panel, on page 6
•Front Panel LEDs, on page 8
•Rear Panel, on page 11
•Rear Panel LEDs, on page 14
•Power Supply, on page 15
•Hardware Specifications, on page 16
•Product ID Numbers, on page 17
•Power Cord Specifications, on page 18
Features
The Cisco Content Security Management Appliances (SMA) M195, M395, M695, and M695F centralize
reporting, tracking, management of quarantined email messages, and web security appliance configuration
settings. They also allow automated data backups.
The SMA M195, M395, M695, and M695F support Cisco AsyncOS version 12.5 and later. See Product ID
Numbers, on page 17 for a list of field-replaceable product IDs (PIDs) associated with the SMA security
management appliances.
The following figures show the Cisco Content Security Appliances.
Figure 1: Cisco Content Security M195 and M395
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
1
Figure 2: Cisco Content Security M695 and M695F
The following table lists the features of the SMA M195, M395, M695, and M695F.
Table 1: SMA M195, M395, M695, and M695F Features
M695FM695M395M195Feature
2 RU1 RUForm factor
Standard 19-in. (48.3 cm) 4-post EIA rackRack mount
Front to rear
Cold aisle to hot aisle
Airflow
Displays the serial numberPullout asset card
Two threaded holes for dual-hole grounding lug
Use is optional; the supported AC power supplies have internal grounding, so no
additional chassis grounding is required.
Grounding holes
OptionalLocking faceplate
YesUnit identification
button
YesPower button
32-GB RAM
16-GB RAMMemory
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
2
Overview
Features
M695FM695M395M195Feature
Two 16-GB
Internal component only; not
field-replaceable
One 16-GB
Internal component only; not
field-replaceable
RDIMMs
One built-in port (MGMT)One built-in port
(DATA 1)
Management port
One Gigabit
Ethernet (DATA 1)
Two fiber optic
(DATA 2 and
DATA 3)
Five Gigabit Ethernet (DATA 1, DATA
2, DATA 3, DATA 4, DATA 5)
One Gigabit
Ethernet (DATA 2)
Network ports
Accessed through the 1-Gb dedicated portRemote power
cycling (RPC)
Two
USB 3.0 Type A
USB ports
Two fiber optic
NoSFP+ ports
GLC-SX-MMD (1
Gb) (optional)
SFP-10G-SR (10
Gb) (optional)
—Supported SFP+
One 1-Gb RJ-45 serial port running RS-232 (RS-232D TIA-561)
Directly connects a computer to the chassis
Serial console port
Two
1050-W AC
Hot-swappable and redundant as 1+1
Two
770-W AC
Hot-swappable and
redundant as 1+1
One
770-W AC
You can order a
second power
supply for
redundancy as 1+1.
AC power supply
Do not
mix
power
supply
type or
wattage
between
models.
Note
Six fans for front-to-rear cooling
Internal component only; not field-replaceable. If one fan fails, you must send your
chassis for RMA.
Fans
Sixteen 600-GB SAS HDDs
RAID 10, hot-swappable
Eight 600-GB SAS
HDDs
RAID 10,
hot-swappable
Two 600-GB SAS
HDDs
RAID 1,
hot-swappable
Storage
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
3
Overview
Features
Package Contents
The following figure shows the package contents for the SMA M195, M395, M695, and M695F. Note that
the contents are subject to change and your exact contents might contain additional or fewer items.
Figure 3: Package Contents
RJ-45 to DB9-RS232 console cable (Cisco part
number 72-3383-XX)
2Chassis1
RJ-45 to RJ-45 Cat 5 Ethernet cable, yellow six
feet long (Cisco part number 72-1482-XX)
4Cisco rail kit (Cisco part number 800-43376-02)3
Two 1-Gb or 10-Gb SFP+ fiber optic transceivers
with cables
Supported on the M695F. You cannot
mix SFP transceiver types in the same
chassis. You can either have two 1-Gb
or two 10-Gb SFPs in the same
chassis.
Note
6Useful Links document
The steps in the Useful Links document send you
to the documentation you need to install, set up,
and configure your SMA appliance.
5
Serial Number Locations
The serial number (SN) for the SMA M195, M395, M695, and M695F is printed on the pullout asset card
located on the front panel as shown in the following figure.
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
4
Overview
Package Contents
Figure 4: Serial Number on Pullout Asset Card
The serial number is also on the label on the cover of the chassis as shown in the following figure.
The cover latch on the top of the chassis cover is not supported. There are no internal field-replaceable parts
in the SMA M195, M395, M695, and M695F.
Caution
Figure 5: Serial Number Location on Cover
Cover latch
Not supported
2Serial number label1
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
5
Overview
Serial Number Locations
Front Panel
The following figure shows the front panel features and disk-drive configuration for the SMA M195. See
Front Panel LEDs, on page 8 for a description of the LEDs.
Figure 6: M195 Front Panel
Power button/power status LED2Drive bays
Supports two 600-GB SAS HDDs in slots 1 and
2
1
System status LED4Unit identification button/LED3
Fan status LED6Power supply status LED5
Temperature status LED8Network link activity LED7
Pullout asset card9
The following figure shows the front panel features and disk-drive configuration for the SMA M395. See
Front Panel LEDs, on page 8 for a description of the LEDs.
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
6
Overview
Front Panel
Dieses Handbuch passt für folgende Modelle
7
Inhaltsverzeichnis
Andere Cisco Firewall Handbücher
Cisco
Cisco PIX-525-UR-BUN - PIX 525 Unrestricted Bundle Bedienungsanleitung
Cisco
Cisco Meraki MX64W Bedienungsanleitung
Cisco
Cisco ASA 5508-X Bedienungsanleitung
Cisco
Cisco PIX 501 - Security Appliance Bedienungsanleitung
Cisco
Cisco RV110W Bedienungsanleitung
Cisco
Cisco TelePresence Server 7010 Bedienungsanleitung
Cisco
Cisco Firepower 4100 Series Bedienungsanleitung
Cisco
Cisco Spam Bedienungsanleitung
Cisco
Cisco PIX 506E - Security Appliance Bedienungsanleitung
Cisco
Cisco 5505 - ASA Firewall Edition Bundle Bedienungsanleitung
Cisco
Cisco CSA 90 Series Produkthandbuch
Cisco
Cisco S195 Handbuch
Cisco
Cisco ASA 5506-X Montageanleitung
Cisco
Cisco Firepower 2120 Handbuch
Cisco
Cisco Firepower 2100 Series Kurzanleitung
Cisco
Cisco ASA 5555-X Bedienungsanleitung
Cisco
Cisco Firepower 3500 Technisches Dokument
Cisco
Cisco FPR1010-ASA-K9 Bedienungsanleitung
Cisco
Cisco Firepower 4100 Series Installations- und Betriebshandbuch
Cisco
Cisco Firepower 2100 Bedienungsanleitung
Beliebte Firewall Handbücher anderer Marken
Fortinet
Fortinet FortiGate Voice Series Bedienungsanleitung
ADTRAN
ADTRAN NetVanta 2300 Bedienungsanleitung
SecureLogix
SecureLogix ETM System Bedienungsanleitung
NETGEAR
NETGEAR ProSafe FVX538 Bedienungsanleitung
Lanner
Lanner FW-8877 Bedienungsanleitung
Huawei
Huawei USG6000 Series Installations- und Betriebshandbuch
H3C
H3C SecPath F5000-AI-15 Bedienungsanleitung
Nexcom
Nexcom DNA 1150 Bedienungsanleitung
Fortinet
Fortinet FortiGate-60 series Bedienungsanleitung
Draytek
Draytek Vigor2860 Series Bedienungsanleitung
Lanner electronics
Lanner electronics FW-7650 Series Bedienungsanleitung
Swisscom
Swisscom Internet Backup Bedienungsanleitung
