Cisco AS5400XM Bedienungsanleitung

Quick Start Guide

Cisco AS5350XM and Cisco AS5400XM Universal Gateways

INCLUDING LICENSE AND WARRANTY

1Cisco 90-Day Limited Hardware Warranty Terms

2Documents, Equipment, and Tools

3Install Chassis

4Install Modules

5Connect Cables

6Power Up the Universal Gateway

7Perform Initial Configuration

8Slot Numbering

9Obtaining Documentation

10 Documentation Feedback

11 Cisco Product Security Overview

12 Obtaining Technical Assistance

13 Obtaining Additional Publications and Information

1 Cisco 90-Day Limited Hardware Warranty Terms

There are special terms applicable to your hardware warranty and various services that you can use during the warranty period.

Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available on

Cisco.com. Follow these steps to access and download the Cisco Information Packet and your warranty and license agreements

from Cisco.com.

1. Launch your browser, and go to this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm

The Warranties and License Agreements page appears.

2. To read the Cisco Information Packet, follow these steps:

a. Click the Information Packet Number field, and make sure that the part number 78-5235-03A0 is highlighted.

b. Select the language in which you would like to read the document.

c. Click Go.

The Cisco Limited Warranty and Software License page from the Information Packet appears.

d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document

Format (PDF).

Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe’s

website: http://www.adobe.com

3. To read translated and localized warranty information about your product, follow these steps:

a. Enter this part number in the Warranty Document Number field:

78-5236-01C0

b. Select the language in which you would like to read the document.

c. Click Go.

The Cisco warranty page appears.

d. Review the document online, or click the PDF icon to download and print the document in Adobe Portable Document

Format (PDF).

You can also contact the Cisco service and support website for assistance:

http://www.cisco.com/public/Support_root.shtml

Duration of Hardware Warranty

Ninety (90) days.

Replacement, Repair, or Refund Policy for Hardware

Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after

receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

To Receive a Return Materials Authorization (RMA) Number

Contact the company from whom you purchased the product. If you purchased the product directly from Cisco, contact your

Cisco Sales and Service Representative.

Complete the information below, and keep it for reference:

Company product purchased from

Company telephone number

Product model number

2 Documents, Equipment, and Tools

User Documentation

All of the documents described here are available online and on the Documentation DVD. To be sure of obtaining the latest

information, you should access the online documentation.

Note The information in this document applies to the Cisco AS5350XM and Cisco AS5400XM universal gateways.

To access online user documentation:

From Cisco.com at http://www.cisco.com, choose Technical Support & Documentation.

Cisco AS5350XM and Cisco AS5400XM Universal Gateway Documentation

Regulatory Compliance and Safety Information

The Regulatory Compliance and Safety Information document provides essential safety information applicable to your universal

gateway. A printed copy of this document is shipped with this device.

You can access this document at Technical Support & Documentation > Product Support > Universal Gateways and Access

Servers > Cisco AS5300 or Cisco AS5400 Series Universal Gateways > Install and Upgrade Guides.

Hardware Installation

The chassis installation guide provides additional detailed description, installation, and cabling information.

You can access this document at Technical Support & Documentation > Product Support > Universal Gateways and Access

Servers > Cisco AS5300 or Cisco AS5400 Series Universal Gateways > Install and Upgrade Guides.

Software Configuration

The software configuration guide provides additional detailed configuration information.

You can access this document at Technical Support & Documentation > Product Support > Universal Gateways and Access

Servers > Cisco AS5300 or Cisco AS5400 Series Universal Gateways > Configuration Guides.

Cisco IOS Software Documentation

Master Index to Software Documentation

The master index provides links to topics and commands for specific Cisco IOS software releases.

You can access these documents at Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS

Software Release you are using > Master Index.

Configuration Guides

The Cisco IOS software configuration guides provide detailed configuration procedures and examples.

You can access these documents at Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS

Software Release you are using > Configuration Guides.

Product serial number

Maintenance contract number

Command References

The Cisco IOS software command references provide detailed information about each command.

You can access these documents at Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS

Software Release you are using > Command References.

New Feature Documentation

New feature documentation contains detailed information about new features introduced in specific Cisco IOS releases.

You can access these documents at Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS

Software Release you are using > Feature Guides.

If you have an account on Cisco.com, you can get updated information about platform support for features by accessing Feature

Navigator at the following URL:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

Release Notes

Cisco IOS release notes for all platforms provide up-to-date information about specific Cisco IOS software releases.

You can access these documents at Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS

Software Release you are using > Release Notes.

Items Included with Cisco AS5350XM and Cisco AS5400XM Universal Gateways

•19-inch (48.26-cm) and 24-inch (60.96-cm) rack-mount kits

•Rubber feet for desktop installation

•RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)

•RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL)

•RJ-45-to-DB-25 male DCE adapter (labeled MODEM)

•RJ-45-to-RJ-45 rollover console cable

•ESD-preventive wrist strap

•Nylon cable ties

•Cable tie holder

•Grounding lug

•Cisco Information Package

Items Not Included

Individual items in this list may be required for your particular application:

•Straight-through RJ-45-to-RJ-45 cable for an Ethernet connection

•Straight-through RJ-45-to-RJ-45 cables for T1 connections

•E1 cables for E1 connections

•Ethernet hub, Gigabit Ethernet switch, or PC with a network interface card for Ethernet LAN connections

•PC running terminal emulation software for local administrative access

•Modem for remote administrative access

•One breakout cable consisting of a 36-pin connector connected to eight RJ-45 adapters for CT1/CE1 connections

•75-ohm coaxial cable for a CT3 connection

3 Install Chassis

Note The information in this document applies to the Cisco AS5350XM and Cisco AS5400XM universal gateways.

Safety Information

For safety information you need to know before working on your Cisco universal gateway, see the Regulatory Compliance and

Safety Information document that accompanied this device.

Setting Up the Chassis

You can install the chassis in a rack or set it on a desktop. Select the procedure that best meets the needs of your network:

•Rack-Mounting the Chassis, page 5

•Desktop Installation, page 7

Warning

This unit is intended for installation in restricted access areas. A restricted access area can be accessed only

through the use of a special tool, lock and key, or other means of security.

Statement 1017

Rack-Mounting the Chassis

This section describes how to rack-mount the chassis. The universal gateway arrives with 19-inch (48.26-cm) rack-mount

brackets and larger brackets for use with a 23-inch (58.42-cm) or 24-inch (60.96-cm) rack.

Figure 1 Cisco AS5350XM Universal Gateway Rack-Mount Brackets

Figure 2 Cisco AS5400XM Universal Gateway Rack-Mount Brackets

The following information will help you plan your equipment rack configuration:

•Enclosed racks must have adequate ventilation. Ensure that the rack is not congested, because each unit generates heat. An

enclosed rack should have louvered sides and a fan to provide cooling air. Heat generated by equipment near the bottom of

the rack can be drawn upward into the intake ports of the equipment above.

36012

Bracket for 23-inch rackBracket for 19-inch rack

H6028

Bracket for 23- or 24-inch rackBracket for 19-inch rack

•When mounting a chassis in an open rack, ensure that the rack frame does not block the intake or exhaust ports. If the

chassis is installed on slides, check the position of the chassis when it is seated in the rack.

•Baffles can isolate exhaust air from intake air, which also helps to draw cooling air through the chassis. The best placement

of the baffles depends on the airflow patterns in the rack, which can be found by experimenting with different

configurations.

•When equipment installed in a rack (particularly in an enclosed rack) fails, try operating the equipment by itself, if possible.

Power down other equipment in the rack (and in adjacent racks) to allow the unit under test a maximum of cooling air and

clean power.

•Install the chassis and external devices to which it will connect in a contiguous stack.

Required Tools and Equipment

You need the following tools and equipment to rack-mount the chassis:

•Number 2 Phillips screwdriver (not included)

•Medium flat-blade screwdriver (not included)

•Screws for attaching the chassis to the rack (not included)

•Standard rack-mount brackets (included)

•Screws for attaching the brackets to the chassis (included)

Attaching Brackets

Attach the mounting brackets to the chassis as shown, using the screws provided. Attach the second bracket to the opposite side

of the chassis.

Note The chassis may be installed with either the front panel or the back panel facing forward.

Figure 3 Cisco AS5350XM Universal Gateway Bracket Installation—Front Panel Forward (19-Inch Rack)

Figure 4 Cisco AS5400XM Universal Gateway Bracket Installation—Front Panel Forward (19-Inch Rack)

35669

H10643

Installation in a Rack

Install the chassis in the rack. Rack-mounting screws are not provided. Use two screws for each side (supplied with the rack).

Figure 5 Installing the Cisco AS5350XM Universal Gateway in a Rack (19-Inch Rack)

Figure 6 Installing the Cisco AS5400XM Universal Gateway in a Rack (19-Inch Rack)

Desktop Installation

For desktop or shelf mounting, use the rubber “feet” shipped on a black adhesive strip with the chassis. They protect the chassis

and provide a nonskid surface.

The location of the chassis is extremely important for proper operation. Equipment placed too close together, inadequate

ventilation, and inaccessible panels can cause malfunctions and shutdowns, and can make maintenance difficult. The following

information will help you to plan the location of the chassis:

•Plan for access to both front and back panels of the chassis.

•Ensure that the room where the chassis operates has adequate ventilation. Remember that electrical equipment generates

heat. Ambient air temperature may not cool equipment to acceptable operating temperatures without adequate ventilation.

To attach the rubber feet, follow these steps:

Step 1 Locate the rubber feet that shipped with the chassis.

Step 2 Place the universal gateway upside-down on a smooth, flat surface.

Step 3 Peel the rubber feet off the black adhesive strip, and attach them adhesive-side-down at each corner of the underside of

the chassis.

Step 4 Place the universal gateway top-side-up on a flat, smooth, secure surface.

35659

29034

Caution Do not place anything on top of the universal gateway that weighs more than 10 lb (4.5 kg). Excessive weight on

top could damage the chassis.

Chassis Ground Connection

You must connect the chassis to a reliable earth ground by using the ground lug (provided) and size AWG 6 (13 mm2) wire.

To attach the chassis ground, follow these steps:

Step 1 Strip one end of the ground wire to expose approximately 0.75 in. (20 mm) of conductor.

Step 2 Crimp the ground wire to the ground lug, using a crimp tool of the appropriate size.

Step 3 Attach the ground lug to the chassis as shown in Figure 7 and Figure 8. Use a medium flat-blade screwdriver and the

screws supplied with the ground lug. Tighten the screws to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m).

Figure 7 Cisco AS5350XM Universal Gateway Ground Lug Attachment

Figure 8 Cisco AS5400XM Universal Gateway Ground Lug Attachment

Step 4 Connect the other end of the ground wire to a suitable grounding point at your site.

82735

Ground lug

attachment

82734

Ground lug

attachment

4 Install Modules

Note The information in this document applies to the Cisco AS5350XM and Cisco AS5400XM universal gateways.

Note The Cisco AS5350XM and Cisco AS5400XM universal gateways come with carrier cards and feature cards already

installed. If you are not installing additional carrier cards or feature cards, proceed to the “Connect Cables” section on

page 15.

For additional information about installing carrier cards and feature cards, see the Cisco AS5350XM and Cisco AS5400XM

Universal Gateways Card Installation Guide.

You can access this document at Technical Support & Documentation > Product Support > Universal Gateways and Access

Servers > Cisco AS5300 or Cisco AS5400 Series Universal Gateways > Install and Upgrade Guides.

Installing Carrier Cards

Caution The carrier cards that carry the feature cards are not hot-swappable. Removing or replacing a carrier card while

the system is still powered up may cause permanent damage to electronic circuits on the card.

Warning

Do not work on the system or connect or disconnect cables during periods of lightning activity.

Statement 1001

Warning

Before opening the unit, disconnect the telephone-network cables to avoid contact with telephone-network

voltages.

Statement 1041

Installing a Carrier Card

If you need to install a carrier card, follow these steps:

Step 1 Make sure the chassis is powered down.

Warning

Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect the

power at the circuit breaker on DC units.

Statement 12

Step 2 Attach an ESD-preventive wrist strap.

Step 3 Slide the carrier card into the slot until it touches the backplane connector. (See Figure 9 and Figure 10.)

Figure 9 Install the Carrier Card in the Cisco AS5350XM Universal Gateway

36004

Figure 10 Install the Carrier Card in the Cisco AS5400XM Universal Gateway

Step 4 Align the captive screws with their holes, and seat the card completely.

Step 5 Tighten the two captive screws to secure the carrier card to the chassis. (See Figure 11 and Figure 12.)

Figure 11 Tighten the Captive Screws on the Cisco AS5350XM Universal Gateway

Figure 12 Tighten the Captive Screws on the Cisco AS5400XM Universal Gateway

Step 6 If the carrier card has a blank feature card slot, install a blank cover over the open feature card slot to ensure proper

airflow inside the chassis.

Figure 13 Blank Feature Card Cover

37161

36005

Captive screw

37162

Captive

screw Captive

screw

36033

Andere Handbücher für AS5400XM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Tor Handbücher

Cisco

Cisco Explorer 9800 Multi-Screen Series Bedienungsanleitung

Cisco

Cisco Linksys WAG54GX2 Bedienungsanleitung

Cisco

Cisco Firepower 1100 Bedienungsanleitung

Cisco

Cisco Explorer 9800 Bedienungsanleitung

Cisco

Cisco 3545 PRI Installations- und Betriebshandbuch

Cisco

Cisco ASR 5000 Series Bedienungsanleitung

Cisco

Cisco DPC2320 DOCSIS Bedienungsanleitung

Cisco

Cisco LINKSYS RFC 2364 Original Betriebsanleitung

Cisco

Cisco Linksys WAG310G Bedienungsanleitung

Cisco

Cisco VG350 Bedienungsanleitung

Cisco

Cisco TelePresence ISDN GW MSE 8321 Bedienungsanleitung

Cisco

Cisco IG21 Series Bedienungsanleitung

Cisco

Cisco VG200 Montage- und Bedienungsanleitung

Cisco

Cisco ISDN GW 3241 Bedienungsanleitung

Cisco

Cisco DPC2425 Bedienungsanleitung

Cisco

Cisco LINKSYS AG241 Bedienungsanleitung

Cisco

Cisco AS5400HPX Bedienungsanleitung

Cisco

Cisco DPC2325 Bedienungsanleitung

Cisco

Cisco VG200 Bedienungsanleitung

Cisco

Cisco Meraki Z3 Bedienungsanleitung

Cisco

Cisco ASR 5000 Series Bedienungsanleitung

Cisco

Cisco SPA-841 - Sipura VoIP Phone Bedienungsanleitung

Cisco

Cisco VG202 Bedienungsanleitung

Cisco

Cisco VG450 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung