Cisco RV Series Bedienungsanleitung

Inhaltsverzeichnis

Andere Cisco Netzwerk-Router Handbücher

Cisco

Cisco 2431 - IAD Router Handbuch

Cisco

Cisco 4948 Series Bedienungsanleitung

Cisco

Cisco 1905 Bedienungsanleitung

Cisco

Cisco Router Cisco 831 Anleitung zur Verwendung

Cisco

Cisco IAD2435-8FXS Bedienungsanleitung

Cisco

Cisco Catalyst 2900 Series XL Bedienungsanleitung

Cisco

Cisco UBR7246VXR Handbuch

Cisco

Cisco ASR 902 Betriebsanleitung

Cisco

Cisco QuickVPN - PC Bedienungsanleitung

Cisco

Cisco SB 100 Series Originalbetriebsanleitung

Cisco

Cisco ASR 9001 Handbuch

Cisco

Cisco Catalyst 4500 Series Bedienungsanleitung

Cisco

Cisco RVS4000 - Gigabit Security Router Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungsanleitung

Cisco

Cisco Linksys SGE2010P Handbuch

Cisco

Cisco Catalyst IR1800 Rugged Series Bedienungsanleitung

Cisco

Cisco 1801 Bedienungsanleitung

Cisco

Cisco AGS+ Bedienungsanleitung

Cisco

Cisco 3825 Series Service-Handbuch

Cisco

Cisco 1811 Bedienungsanleitung

Cisco

Cisco 12008 Bedienerhandbuch

Cisco

Cisco WS-C1924-A - Catalyst 1900 24 Ports 10MB... Handbuch

Cisco

Cisco RV042 - Small Business Dual WAN VPN Router Gebrauchsanweisung

Cisco

Cisco 10720 Series Bedienerhandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung

Lorex

Lorex F5D8230-4 Bedienungsanleitung

●

●

●

●

Configure Internet Protocol (IP) Mode on an

RV Series Router

Objective

The Internet Protocol (IP) Mode tells your router what IP version your local network is using

in comparison to what version the Wide Area Network (WAN) uses. It is important to

configure this option correctly as certain features may or may not be available on your router

depending on what the state of your network is.

This article aims to show you how to configure the IP Mode on an RV Series Router.

Applicable Devices

RV Series

Software Version

1.0.3.16 — RV130, RV130W

1.0.0.17 — RV132W

1.0.0.21 — RV134W

Configure IP Mode

Step 1. Log in to the web-based utility and choose Networking > IP Mode.

Note: The images on this article are taken from the RV130W router. Menu options may vary

per model.

Step 2. In the IP Mode field, choose an option from the drop-down list.

●

●

●

●

●

●

●

●

If you are using RV130 or RV130W, the options are:

LAN:IPv4, WAN:IPv4 — Both the LAN and the WAN use IPv4.

LAN:IPv6, WAN:IPv4 — Use this if the LAN only uses IPv6 but the WAN uses IPv4. If you

choose this option, you may proceed to the Static 6to4 DNS section.

LAN:IPv6, WAN:IPv6 — Both the LAN and the WAN use only IPv6.

LAN:IPv4+IPv6, WAN:IPv4 — The LAN uses both IPv4 and IPv6, but the WAN only uses

IPv4. If you choose this option, you may proceed to the Static 6to4 DNS section.

LAN:IPv4+IPv6, WAN:IPv4+IPv6 — Both the LAN and the WAN use IPv4 and IPv6.

LAN:IPv4, WAN:IPv6 — The LAN uses IPv4, but the WAN uses IPv6.

If you are using the RV132W or RV134W router, the options are:

LAN:IPv4, WAN:IPv4 — Both the LAN and the WAN use IPv4.

LAN:IPv4+IPv6, WAN:IPv4+IPv6 — Both the LAN and the WAN use IPv4 and IPv6.

Step 3. Click Save.

Step 4. Click OK on the notification telling you that you will now be redirected to the new

default IP address of the router. If the page is not redirected automatically in 2-3 minutes,

enter the new IPv4 or IPv6 address to log in to the router.

Static 6to4 DNS (RV130 and RV130W only)

If you chose LAN:IPv6, WAN:IPv4 or LAN:IPv4+IPv6, WAN:IPv4 from the IP Mode drop-

down list, the Show Static 6to4 DNS Entry will become enabled. It allows IPv6 packets to be

transmitted over an IPv4 network. The 6to4 tunneling is typically used when a site or end

user wants to connect to the IPv6 Internet using the existing IPv4 network. Configuring this

feature is optional and available only on RV130 and RV130W.

Step 1. Click the Show Static 6to4 DNS Entry button to display the Domain to IP address

table. This table is used to map domais to IP addresses, so that a user is redirected to a

corresponding IP address when using the domain.

Step 2. In the Domain 01 field, enter a domain that you want to redirect to an IP address.

You can use up to five domains.

Note: In this example, the domain used is cisco.com.

Step 3. For each domain, enter the IP address on the corresponding IP field.

Note: In this example, the IP address is 10.10.242.242.

Step 4. Click Save.

Step 5. Click OK on the notification telling you that you will now be redirected to the new

default IP address of the router. If the page is not redirected automatically in 2-3 minutes,

please enter the new IPv4 or IPv6 address to log in to the router.

You should now have successfully configured the IP mode on your RV Series Router.