Cisco RV120W Bedienungsanleitung

Andere Handbücher für RV120W

4

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Cisco Netzwerk-Router Handbücher

Cisco

Cisco 1711 - Security Access Router Bedienungsanleitung

Cisco

Cisco Linksys RV0041 Gebrauchsanweisung

Cisco

Cisco 10000 SIP-600 Bedienungsanleitung

Cisco

Cisco ASR 920 series Bedienungsanleitung

Cisco

Cisco NCS 5000 Series Handbuch

Cisco

Cisco CISCO7204VXR Bedienerhandbuch

Cisco

Cisco ASR1002 - ASR 1002 Router Bedienungsanleitung

Cisco

Cisco N540-FH-CSR-SYS Handbuch

Cisco

Cisco ASA 5505 Bedienungsanleitung

Cisco

Cisco IR1101 Handbuch

Cisco

Cisco 12000 - Series Chassis Modular Expansion... Handbuch

Cisco

Cisco 1805 Bedienungsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco CGR2010 Kurzanleitung

Cisco

Cisco Internet Router Cisco 12404 Bedienungsanleitung

Cisco

Cisco CRS-1 - Carrier Routing System Router Bedienungsanleitung

Cisco

Cisco NCS 5500 Series Bedienungsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco RV082 - Small Business VPN Router Bedienungsanleitung

Cisco

Cisco Linksys E-Series Installationsanleitung

Cisco

Cisco SB 106 Bedienungsanleitung

Cisco

Cisco Broadband Access Center Bedienungsanleitung

Cisco

Cisco SFE2000P Bedienerhandbuch

Cisco

Cisco uBR925 Einrichtungshandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung

Lorex

Lorex F5D8230-4 Bedienungsanleitung

Factory Reset and Reboot on RV120W and

RV220W

Objective

The router can be set to factory default if the Reset button on the router is pressed or

through the web configuration utility on the router. Press the Reset button on the back of the

router for 8 seconds to reset your router to its factory default settings. Any settings on the

router will be erased and the router IP address will become "192.168.1.1". Both the

username and the password will be "cisco".

Reboot is a soft operation which a user might need to use if there is a problem with software

or hardware. Reboot is handled by software and happens in automatic mode. Reset on the

other hand is a rough operation which a user might need when the device cannot restart or

be turned off.

This article explains how to reset your device through the reset button and also through the

configuration utility.

Applicable Devices

• RV120W

• RV220W

Software Version

• v1.0.4.17

Functions of the Reset Button

The button has two functions:

• Reboot — Press the button for at least 3 seconds but no more than 8 seconds.

• Reset — Press and hold in the button for more than 8 seconds. This resets the unit and

restores the factory defaults.

Reset the Router with the Reset Button

Note: Take note of the current settings of the device before resetting.

Resetting through Reset button can be done in two ways:

1. Press the Reset button of the router for 8 seconds. All the display LEDs light up to

indicate the start of the reset process.

2. If the normal reset does not work, unplug the power adapter and then plug it back in while

you press the Reset button.

Reboot the Router with the Reset Button

Reboot through Reset button can be done in only one way:

1. Press the Reset button of the router for at least 3 seconds but no more than 8 seconds.

The power LED of the router blinks to verify that the router has restarted.

Reboot the Router with the Web Configuration Utility

Step 1. Log in to the web configuration utility and choose Administration > Reboot. The

Reboot page opens:

Step 2. Click Reboot to proceed with the reboot of router.

Reset the Router with the Web Configuration Utility

Step 1. Log in to the web configuration utility and choose Administration > Restore

Factory Default. The Restore Factory Defaults page opens:

Step 2. Click Default to proceed with the restore of factory default settings.