Cisco TelePresence SpeakerTrack 60 Bedienungsanleitung

Cisco TelePresence

SpeakerTrack 60

INSTALLATION GUIDE

The SpeakerTrack 60 uses a unique dual-camera

technique to quickly view a close-up of the active

speaker in the meeting room.

78-100223-02C0 | MARCH 2015.

Installation

We invite you to explore the Project Workplace guide to inspire you on room design and room

setup. Go to: www.cisco.com/go/projectworkplace

Main box contents

A. 1 × Cover plate

B. 1 × Microphone panel with four

biult-in microphones

C. 2 × Precision 60 Camera

D. 1 × Base unit, with connectors

1 × Accessories box

1 × Installation Guide

Accessories

E. 2 × Camera interface plate

F. 1 × Wall bracket

G. 1 × DC Power cable w/ barrel plug,

20 cm / 7.87 in

H. 1 × DC Power cable w/ barrel plug,

45 cm / 17.72 in

I. 1 × Ethernet cable, 20 cm / 7.87 in

J. 1 × Ethernet cable, 35 cm / 13.78 in

K. 1 × Power adapter and power cable

L. 1 × Gloves

M. 1 × Torx Key (T20)

N. 1 × Allen Key

O. 2 × Thumb nut, M4

P. 4 × Pan headed screw, M4 16 mm

Q. 2 × 1/4” UNC screw

R. 1 × Template for attaching the

wall bracket (not shown)

L NM

O QP

78-100223-02C0 | MARCH 2015.

Safety instructions

NOTE: It is of great importance that the wall mount unit is safely installed, that the wall is able to

support the product and that the screws or mounting means used are suitable for the wall and

the weight of the product.

NOTE: According to the relevant international safety standard for IT products the wall is required

to support four times the actual load, which implies that the SpeakerTrack 60 must be mounted to

a wall which supports at least: 4 × 11.25 kg = 45 kg (4 × 24.8 lbs = 99.2 lbs).

NOTE: This type of equipment is to be installed by the submitter’s/dealer’s qualied installer.

The installer is responsible for obtaining safety inspection of the structural integrity of the

installation by the local authority/inspection department.

NOTE: Note that the surface is hot when the camera is in operation.

WARNING: Use Ethernet cable only when connecting to the Ethernet port on the

camera. Do not connect a serial VISCA cable to the Ethernet port on the camera, as

this will cause severe damage to the camera.

78-100223-02C0 | MARCH 2015.

Room guidelines

The participants should be seated within the horizontal eld of view (HFOV) and within the

maximum microphone range. In acoustically dampened rooms, the SpeakerTrack 60 can be

used at the full eective range. In less dampened rooms, the performance may be decreased.

Minimum distance to the side

walls 120 cm / 47.25 in

Maximum microphone

range 900 cm / 354 in

HFOV 80°

Top view of a room with SpeakerTrack 60. For optimal audio tracking the SpeakerTrack

should be mounted at some distance from the side walls.

78-100223-02C0 | MARCH 2015.

Mounting the unit above the monitor

Having eye contact with remote participants is essential for a good user experience, and therefore

you should consider if SpeakerTrack 60 should be mounted above or below the monitor.

NOTE: Obstacles placed in front of the microphone panel, or in the sight line of the

microphones, will cause severe loss in the speaker track performance.

Side view of a room with SpeakerTrack 60 mounted above the monitor. For optimal audio

tracking the SpeakerTrack should be mounted at some distance to the ceiling.

Select a mounting height for SpeakerTrack 60 that provides

clear line of sight, to all four edges of the microphone panel,

from all appropriate positions in the meeting room.

Minimum distance to the

ceiling 40 cm / 15.75 in

78-100223-02C0 | MARCH 2015.

Mounting in a recess above the monitor

SpeakerTrack 60 is designed to be wall mounted. If mounted in a recess, the sound from any

participant in the room must reach at least three of the four microphones on the microphone

panel. To obtain this, the recess should be constructed with sloping walls.

CAD drawings with details and dimensions: http://www.cisco.com/go/telepresence/docs and

navigate to: Collaboration Endpoints > Collaboration Peripherals > TelePresence Peripherals >

TelePresence SpeakerTrack 60 > Technical References

• The bottom wall of the recess is sloped 17°

• The side walls of the recess are sloped 45°

• The maximum depth of the recess is 217.6 mm (8.56 in). If less depth the camera will

protrude from the wall. Follow local building regulations and accessibility requirements.

820 mm (32.3 in)

320 mm

(12.6 in)

78-100223-02C0 | MARCH 2015.

Side view of a room with SpeakerTrack 60 mounted beow the monitor. For large monitors

(70” and above), we recommend mounting the SpeakerTrack below the monitor.

Select a mounting height for SpeakerTrack 60 that provides

clear line of sight, to all four edges of the microphone panel,

from all appropriate positions in the meeting room.

Mounting the unit below the monitor

Having eye contact with remote participants is essential for a good user experience, and therefore

you should consider if SpeakerTrack 60 should be mounted above or below the monitor.

NOTE: Obstacles placed in front of the microphone panel, or in the sight line of the

microphones, will cause severe loss in the speaker track performance.

78-100223-02C0 | MARCH 2015.

Mounting in a recess below the monitor

SpeakerTrack 60 is designed to be wall mounted. If mounted in a recess/box, the sound

from any participant in the room must reach at least three of the four microphones on the

microphone panel. To obtain this the recess/box must be constructed with inclined walls.

CAD drawings with details and dimensions: http://www.cisco.com/go/telepresence/docs and

navigate to: Collaboration Endpoints > Collaboration Peripherals > TelePresence Peripherals >

TelePresence SpeakerTrack 60 > Technical References

820 mm (32.3 in)

320 mm

(12.6 in)

• The upper wall of the recess is sloped 17°

• The side walls of the recess are sloped 45°

• The maximum depth of the recess is 217.6 mm (8.56 in). If less depth the camera will

protrude from the wall. Follow local building regulations and accessibility requirements.

78-100223-02C0 | MARCH 2015.

Mounting the wall bracket

NOTE: Read the room guidelines, mounting guidelines and safety instructions before you start

mounting the wall bracket (F). Use the Template for attaching the wall bracket (R), found with

the accessories, and follow the instructions on the template when mounting the wall bracket.

Template, page 1 (found with the accessories)

Template, page 2

78-100272-01A0 | FEBRUARY 2014.

Template for attaching wall bracket for SpeakerTrack 60

Gabarit de xation du support mural pour SpeakerTrack 60

Check that the unit is level.

Vériez que l’appareil est à niveau.

SpeakerTrack 60

rear panel

SpeakerTrack 60

panneau arrière

The monitor

center point

Template for drilling holes

(found overleaf)

Modèle pour les trous de forage

(qui se trouve au verso)

Wall bracket

Support mural

Find the center point of the

monitor and the top center point of

the SpeakerTrack 60 rear panel.

Localisez le centre du moniteur

et le centre supérieur du

SpeakerTrack 60.

Use the template on the other side of

this sheet when drilling holes for the

wall bracket. Screw dimension M6.

Utilisez le modèle au verso de cette

page pour le perçage des trous de la

xation murale. Vis dimension M6.

Select the type of attachment for

the wall bracket on the basis of the

type of material the wall is made of

(wood, concrete, gypsum).

Sélectionnez le type de xation du

support mural en fonction du type

de matériau du mur (bois, ciment,

gypse).

78-100223-02C0 | MARCH 2015.

Mounting the base unit

Place the microphone panel (B) on a clean and stable surface (for example a table) with the

microphone cables headed up and the textile headed down.

Remove the cover plate (A) from the base unit before this

operation. Hold the base unit (D) as illustrated and slide in

place. Make sure the guide-pins positions correctly.

Use the four pan headed screws (P) when fastening the base unit.

Use the Torx Key (M) and tighten the screws.

Use the supplied

gloves (L).

Andere Handbücher für TelePresence SpeakerTrack 60

Inhaltsverzeichnis

Andere Cisco Sprecher Handbücher

Cisco

Cisco LINKSYS DMSPK50 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung