Cisco IE3400H Leitfaden

Switch Mounting

•Switch Mounting, on page 1

Switch Mounting

This chapter describes how to mount the switch.

Mounting the Switch

To prevent the switch from overheating, ensure these minimum clearances:– Top and bottom: 2.0 in. (50.8

mm)– Exposed side (not connected to the module): 2.0 in. (50.8 mm) – Front: 2.0 in. (50.8 mm)

Caution

Installing the Switch on the Wall

To attach the switch to a wall or a panel, follow these steps.

Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware

or to follow the correct procedures could result in a hazardous situation to people and damage to the system.

Statement 378

Warning

Procedure

Step 1 Position the switch mounting bracket against the wall or a panel in the desired location, with the arrow pointing

up. See the following figure. Attach the bracket to the wall with the 4 enclosed Philips screws.

Switch Mounting

Figure 1: Mounting Wall Bracket to Wall

When attaching the bracket to the wall or pannel, ensure that the screws engage a stud or support

structure capable of supporting the weight of the bracket and the switch.

Note

Step 2 Loosly attach the 4 mounting screws to the switch and slide it into the bracket and down. See the following

figure.

Switch Mounting

Installing the Switch on the Wall

Figure 2: Attaching the Switch to the Mounting Bracket

Step 3 To remove the switch, loosen the 4 mounting screws and slide the switch up and forward, out of the mounting

bracket. Then the bracket itself can be unscrewed from the wall, if necessary.

What to do next

After the switch is mounted on the wall or panel, connect the power and alarm wires, as described in the

“Connecting Alarm Circuits” section on page -12 .

Switch Mounting

Installing the Switch on the Wall

Switch Mounting

Installing the Switch on the Wall

Inhaltsverzeichnis

Andere Cisco Schalten Handbücher

Cisco

Cisco Linksys EZXS88W Bedienungsanleitung

Cisco

Cisco MDS 9120 - Fabric Switch Bedienungsanleitung

Cisco

Cisco Nexus 7000 Series Installationshandbuch

Cisco

Cisco 2960G-48TC - Catalyst Switch Abmessungen

Cisco

Cisco MEM-S1-128MB Installations- und Betriebshandbuch

Cisco

Cisco 200E Series Bedienungsanleitung

Cisco

Cisco Nexus 9396PX Handbuch

Cisco

Cisco Meraki MS320 Series Bedienungsanleitung

Cisco

Cisco MDS 9100 Series Bedienungsanleitung

Cisco

Cisco SG350X-24P Bedienungsanleitung

Cisco

Cisco 4948 Series Bedienungsanleitung

Cisco

Cisco Catalyst Express 500-24LC Bedienungsanleitung

Cisco

Cisco Nexus 5000 Series Bedienungsanleitung

Cisco

Cisco Catalyst 3032 Bedienungsanleitung

Cisco

Cisco Nexus 5000 Series Bedienungsanleitung

Cisco

Cisco 7000 Bedienungsanleitung

Cisco

Cisco Catalyst 9500 Series Betriebsanleitung

Cisco

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module... Bedienungsanleitung

Cisco

Cisco 400 Series Bedienungsanleitung

Cisco

Cisco Nexus 5000 Series Bedienungsanleitung

Cisco

Cisco ONS 15600 Bedienungsanleitung

Cisco

Cisco Nexus 9364D-GX2A Handbuch

Cisco

Cisco Catalyst 2960 Series Bedienungsanleitung

Cisco

Cisco MDS 9500 Series Installationsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung