Cisco ME-3600X-24CX Series Bedienungsanleitung

Cisco Systems, Inc.

www.cisco.com

Cisco has more than 200 offices worldwide.

Addresses, phone numbers, and fax numbers

are listed on the Cisco website at

www.cisco.com/go/offices.

Cisco ME-3600X-24CX Series Switch

Chassis Configuration Guide, Release

15.3(2)S

March 2013

Text Part Number: OL-27620-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this

URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display

output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in

illustrative content is unintentional and coincidental.

Cisco ME 3800X, ME 3600X and ME 3600X 24CX Series Switch Chassis Configuration Guide

iii

Cisco ME 3800X and ME 3600X and ME 3600X-24CX Switch Software Configuration Guide

OL-29335-01

CONTENTS

Preface xxxiii

Audience xxxiii

Purpose xxxiii

Conventions xxxiii

Related Publications xxxiv

Obtaining Documentation and Submitting a Service Request xxxv

CHAPTER

1Using the Command-Line Interface 1-1

Understanding Command Modes 1-1

Understanding the Help System 1-3

Understanding Abbreviated Commands 1-3

Understanding no and default Forms of Commands 1-4

Understanding CLI Error Messages 1-4

Using Command History 1-4

Changing the Command History Buffer Size 1-5

Recalling Commands 1-5

Disabling the Command History Feature 1-5

Using Editing Features 1-6

Enabling and Disabling Editing Features 1-6

Editing Commands through Keystrokes 1-6

Editing Command Lines that Wrap 1-8

Searching and Filtering Output of show and more Commands 1-8

Accessing the CLI 1-9

Accessing the CLI through a Console Connection or through Telnet 1-9

CHAPTER

2Configuring T1/E1 Interfaces 2-1

Required Configuration Tasks 2-1

Setting the Card Type 2-2

Enabling the Interfaces on the Controller 2-2

Verifying Controller Configuration 2-4

Setting the IP Address 2-4

Verifying Interface Configuration 2-5

Optional Configuration Tasks 2-5

Contents

Cisco ME 3800X and ME 3600X and ME 3600X-24CX Switch Software Configuration Guide

OL-29335-01

Configuring Framing 2-5

Verifying Framing Configuration 2-6

Configuring Encapsulation 2-6

Verifying Encapsulation 2-7

Configuring the CRC Size for T1 Interfaces 2-7

Verifying the CRC Size 2-8

Changing a Channel Group Configuration 2-8

Saving the Configuration 2-9

Troubleshooting E1 and T1 Controllers 2-9

Setting Loopbacks 2-9

Setting a Loopback on the E1 Controller 2-10

Setting a Loopback on the T1 Controller 2-10

Run Bit Error Rate Test 2-11

Monitoring and Maintaining the T1/E1 Interface Module 2-13

Configuring CEM 2-13

Configuring a CEM Group 2-13

Using CEM Classes 2-14

Configuring CEM Parameters 2-15

Configuring Payload Size (Optional) 2-15

Setting the Dejitter Buffer Size 2-16

Shutting Down a CEM Channel 2-16

Configuration Examples 2-16

Framing and Encapsulation Configuration Example 2-16

CEM Configuration Example 2-17

CHAPTER

3Configuring BFD Offload 3-1

Restrictions for BFD Offload Support 3-1

Configuring BFD Offload Support 3-1

Verifying BFD Offload Support 3-2

CHAPTER

4Configuring Clocking and Timing 4-1

Network Clocking Overview 4-1

Precision Timing Protocol (PTP) 4-1

Transparent Clocking 4-2

Clock Synchronization 4-2

Synchronous Ethernet 4-3

Synchronous Ethernet ESMC and SSM 4-3

Configuring Clocking and Timing 4-3

Configuring PTP Clocking 4-3

Contents

Cisco ME 3800X and ME 3600X and ME 3600X-24CX Switch Software Configuration Guide

OL-29335-01

Prerequisites for Configuring PTP Clocking 4-4

Configuring an Ordinary Clock 4-4

Configuring a Master Ordinary Clock 4-4

Configuring a Slave Ordinary Clock 4-6

Configuring a Boundary Clock 4-7

Configuring PTP Input and Output 4-9

Configuration Examples 4-9

Configuring a Transparent Clock 4-10

Configuring Synchronous Ethernet 4-10

Configuring an External Clock Source 4-11

Configuring Synchronous Ethernet ESMC and SSM 4-11

Verifying Clock-Related Settings 4-11

Clocking Sample Configurations 4-11

CHAPTER

5Configuring Pseudowire 5-1

Pseudowire Overview 5-1

Circuit Emulation Overview 5-1

Structure-Agnostic TDM over Packet 5-1

Circuit Emulation Service over Packet-Switched Network 5-2

Transportation of Service Using Ethernet over MPLS 5-4

Configuring Structure-Agnostic TDM over Packet (SAToP) 5-5

Configuring Circuit Emulation Service over Packet-Switched Network (CESoPSN) 5-6

Configuring Pseudowire Redundancy 5-7

Verifying the Interface Configuration 5-8

NDEX

xxxiii

Cisco ME-3600X-24CX Series Switch Chassis Configuration Guide

OL-27620-01

Preface

Audience

This guide is for the networking professional managing the Cisco Metro Ethernet (ME) 3600X-24CX

switch, hereafter referred to as the switch. We assume that you are familiar with the concepts and

terminology of Ethernet and local area networking. If you are interested in more training and education

in these areas, learning opportunities including training courses, self-study options, seminars, and career

certifications programs are available on the Cisco Training & Events web page:

http://www.cisco.com/web/learning/index.html

Purpose

This guide provides an overview of software functionality that is specific to the Cisco ME 3600X

24CX Series Switch. It is not intended as a comprehensive guide to all of the software features that can

be run using the Cisco ME 3600X 24CX Series Switch, but only the software aspects that are specific to

this platform.

For information on general software features that are also available on other Cisco platforms, see the

Cisco IOS technology guide for that specific software feature.

For the latest documentation updates, see the release notes for this release.

Conventions

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

• Commands and keywords are in boldface text.

• Arguments for which you supply values are in italic.

• Square brackets ([ ]) mean optional elements.

• Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.

• Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional

element.

Interactive examples use these conventions:

• Terminal sessions and system displays are in screen font.

xxxiv

Cisco ME-3600X-24CX Series Switch Chassis Configuration Guide

OL-27620-01

Preface

• Information you enter is in boldface screen font.

• Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).

Notes and cautions use these conventions and symbols:

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in

this manual.

Caution Means reader be careful. In this situation, you might do something that could result in equipment

damage or loss of data.

Related Publications

These documents provide complete informationabout the switch and are available from these Cisco.com

sites:

ME 3600X-24CX switch:

http://www.cisco.com/en/US/products/ps10956/tsd_products_support_series_home.html

Note Before installing, configuring, or upgrading the switch, see these documents:

• For initial configuration information, see the “Configuring the Switch with the CLI-Based Setup

Program” appendix in the hardware installation guide.

• For upgrading information, see the “Downloading Software” section in the release notes.

• Release Notes for the Cisco ME 3800X and ME 3600X Switch

Note See the release notes on Cisco.com for the latest information.

• Cisco ME 3800X and ME 3600X Switch Software Configuration Guide

• Cisco ME 3800X and ME 3600X Switch Command Reference

• Cisco ME 3800X and ME 3600X System Message Guide

• Cisco ME 3600X-24CX Switch Hardware Installation Guide

• Cisco ME 3600X-24CX Switch Getting Started Guide

• Installation Note for the Cisco ME 3600X-24CX Switch Power Supply and Fan Modules

• Regulatory Compliance and Safety Information for the Cisco ME 3600X-24CX Switche

• Cisco Small Form-Factor Pluggable Modules Installation Notes

• Cisco CWDM GBIC and CWDM SFP Installation Notes

These compatibility matrix documents are available from this Cisco.com site:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

• Cisco Gigabit Ethernet Transceiver Modules Compatibility Matrix

xxxv

Cisco ME-3600X-24CX Series Switch Chassis Configuration Guide

OL-27620-01

Preface

• Cisco 100-Megabit Ethernet SFP Modules Compatibility Matrix

• Cisco CWDM SFP Transceiver Compatibility Matrix

• Cisco Small Form-Factor Pluggable Modules Compatibility Matrix

• Compatibility Matrix for 1000BASE-T Small Form-Factor Pluggable Modules

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional

information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and

revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed

and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free

service and Cisco currently supports RSS version 2.0.

xxxvi

Cisco ME-3600X-24CX Series Switch Chassis Configuration Guide

OL-27620-01

Preface

CHAPTER

1-1

Cisco ME-3600X-24CX Series Switch Chassis Configuration Guide

OL-27620-01

Using the Command-Line Interface

This chapter describes the Cisco IOS command-line interface (CLI) and how to use it to configure your

Cisco ME 3600X-24CX switch. It contains these sections:

• Understanding Command Modes, page 1-1

• Understanding the Help System, page 1-3

• Understanding Abbreviated Commands, page 1-3

• Understanding no and default Forms of Commands, page 1-4

• Understanding CLI Error Messages, page 1-4

• Using Command History, page 1-4

• Using Editing Features, page 1-6

• Searching and Filtering Output of show and more Commands, page 1-8

• Accessing the CLI, page 1-9

Understanding Command Modes

The Cisco IOS user interface is divided into many different modes. The commands available to you

depend on which mode you are currently in. Enter a question mark (?) at the system prompt to obtain a

list of commands available for each command mode.

When you start a session on the switch, you begin in user mode, often called user EXEC mode. Only a

limited subset of the commands are available in user EXEC mode. For example, most of the user EXEC

commands are one-time commands, such as show commands, which show the current configuration

status, and clear commands, which clear counters or interfaces. The user EXEC commands are not saved

when the switch reboots.

To have access to all commands, you must enter privileged EXEC mode. Normally, you must enter a

password to enter privileged EXEC mode. From this mode, you can enter any privileged EXEC

command or enter global configuration mode.

Using the configuration modes (global, interface, and line), you can make changes to the running

configuration. If you save the configuration, these commands are stored and used when the switch

reboots. To access the various configuration modes, you must start at global configuration mode. From

global configuration mode, you can enter interface configuration mode and line configuration mode.

Table 1-1 describes the main command modes, how to access each one, the prompt you see in that mode,

and how to exit the mode. The examples in the table use the hostname Switch.

Inhaltsverzeichnis

Andere Cisco Schalten Handbücher

Cisco

Cisco 3020 - Cisco Catalyst Blade Switch Bedienungsanleitung

Cisco

Cisco Catalyst 2810 Series Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Series Bedienungsanleitung

Cisco

Cisco SFS 7012 InfiniBand Installationshandbuch

Cisco

Cisco Catalyst 2960 Series Handbuch

Cisco

Cisco Catalyst 3550 Bedienungsanleitung

Cisco

Cisco 2950 - Catalyst Switch Bedienungsanleitung

Cisco

Cisco 2975 - Catalyst LAN Base Switch Bedienungsanleitung

Cisco

Cisco Nexus 9236C Handbuch

Cisco

Cisco Catalist 3850 Series Gebrauchsanweisung

Cisco

Cisco Nexus 7000 Series Installations- und Betriebsanleitung

Cisco

Cisco SG550X Series Bedienungsanleitung

Cisco

Cisco Ethernet Connectors Jackscrew Bedienungsanleitung

Cisco

Cisco Aironet 350 Series Bedienungsanleitung

Cisco

Cisco Small Business 200 Series Bedienungsanleitung

Cisco

Cisco Nexus 1110-S Kurzanleitung

Cisco

Cisco AJ732A - MDS 9134 Fabric Switch Bedienungsanleitung

Cisco

Cisco 3750 - Catalyst EMI Switch Bedienungsanleitung

Cisco

Cisco Nexus 9508 Handbuch

Cisco

Cisco Catalyst 2960-X Bedienungsanleitung

Cisco

Cisco 6503 - Catalyst Firewall Security Sys Bedienungsanleitung

Cisco

Cisco Nexus 93128TX Bedienungsanleitung

Cisco

Cisco Catalyst 3560-X-24P Bedienungsanleitung

Cisco

Cisco Small Business 200 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung