Cisco MS420-24 Bedienungsanleitung

MS420 Series (EOS) Installation Guide

On Aug 1, 2016, Cisco Meraki announced the end-of-sale date for the MS420 series switch will be

Oct 31, 2016. The end-of-support date is Oct 31, 2023.

Read more about our Product End-of-Life (EOL) Policy.

Models

Model number Description

MS420-24

Layer-3 24-port 10Gbe SFP+ aggregation switch

with 1 management interface and hot-swappable

power supplies / fans

MS420-48

Layer-3 48-port 10Gbe SFP+ aggregation switch

with 1 management interface and hot-swappable

power supplies / fans

Package contents

In addition to the MS switch, the following are provided (mounting kit provided with 1U models only):

MS420-24 Series front panel

MS420-48 Series front panel

MS420 Series back panel

Power input The MS comes standard with US power cord. EU/

UK/AU power cords may be ordered separately.

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, the main LED will be amber.

Additional functions are described below, from left to right.

Item Function LED Status Meaning

1 Restore N/A

Restore button to clear

switch IP and local

configuration settings

2 Fan Orange

One or more of the

system fans has

malfunctioned or is

missing

3 Power (PSU) Orange

One of the system

PSUs (power supplies)

has malfunctioned or is

missing

2Status Orange

Switch is unable to or

has not yet connected

to the Meraki cloud

Flashing green Firmware upgrade in

process

White

Switch is fully

operational and

connected to the

Meraki cloud

Alternating

Switch is booting,

searching for uplink to

Meraki Cloud

Off Switch does not have

power

3 Switch Port LEDs Off No client connected

Solid orange 10/100/1000 Mbps

Solid green 10,000 Mbps (10Gbps)

In addition, there is a RESTORE button available on the front panel.

Insert a paper clip if a restore is required.

• A brief, momentary press: To delete a downloaded configuration and reboot.

• Press and hold for more than 10 sec: To force the unit into a full factory restore.

Management Port

This port is designed to access the local switch configuration page only. For more information on local configuration,

please see Local Configuration.

The management port can not be used as a standard switched port

The MS420 series will ship with all accessories, including fans and two power supplies. Additional accessories, including

fans and power supplies, can be purchased separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

Bringing your Stack Online

When connecting up your MS420 for the first time the ports are set as ethernet. Once they're online you can convert the

port to a Stack port by simply selecting the option under the interface configuration as shown below:

It's recommended to bring the MS420's online using an uplink on each switch and configuring the port for Stacking prior

to connecting the stack links. This will allow for config sync as well as firmware upgrade. The switches will blink a white

status LED during upgrade so it should be visibly obvious that they're upgrade. When the Switch has a steady White

Light it's connected and ready to continue so the stacking connections can be added.

Mounting hardware

The mounting hardware includes a rack mount rail kit for standard 1U racks. When installing the device, make sure that

there is sufficient space between the rear of the rack and other obstacles to ensure adequate airflow.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Schalten Handbücher

Cisco

Cisco Catalyst 3650 Installationshandbuch

Cisco

Cisco 2950 - Catalyst Switch Bedienungsanleitung

Cisco

Cisco GS7000 Bedienerhandbuch

Cisco

Cisco Nexus 36180YC-R Handbuch

Cisco

Cisco Nexus 9272Q Handbuch

Cisco

Cisco AJ732A - MDS 9134 Fabric Switch Bedienungsanleitung

Cisco

Cisco Linksys SGE2010P Bedienungsanleitung

Cisco

Cisco 3750 - Catalyst EMI Switch Bedienungsanleitung

Cisco

Cisco Catalyst 3560-E Series Bedienungsanleitung

Cisco

Cisco Nexus 9236C Kurzanleitung

Cisco

Cisco Small Business 200 Series Bedienungsanleitung

Cisco

Cisco SD208P Bedienungsanleitung

Cisco

Cisco MDS 9000 Series Installationshandbuch

Cisco

Cisco Nexus 9332C Handbuch

Cisco

Cisco Catalyst 3750-E Series Abmessungen

Cisco

Cisco Catalyst 2960-XR Bedienungsanleitung

Cisco

Cisco Catalyst 9500 Series Bedienungsanleitung

Cisco

Cisco Catalyst 3040 Bedienungsanleitung

Cisco

Cisco 2950-12 - Catalyst Switch Abmessungen

Cisco

Cisco Catalyst 3560E-24PD Bedienungs- und Montageanleitung

Cisco

Cisco 2960G-48TC - Catalyst Switch Abmessungen

Cisco

Cisco Nexus 1000V Bedienungsanleitung

Cisco

Cisco 9124 - mds multilayer fabric switch Bedienungsanleitung

Cisco

Cisco Topspin 360 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung