Cisco Nexus 5596UP Handbuch

CHAPTER

1-1

Cisco Nexus 5000 Series Hardware Installation Guide

Overview

This chapter provides an overview of the Cisco Nexus 5000 Series switches, which include the Cisco

Nexus 5000 Platform switches and the Cisco Nexus 5500 Platform switches. The overview of each of

these switches includes information on the expansion modules, power supplies, and fan modules that you

can include with them.

This chapter includes the following sections:

•Cisco Nexus 5500 Platform Switches, page 1-1

•Cisco Nexus 5000 Platform Switches, page 1-29

Cisco Nexus 5500 Platform Switches

The Cisco Nexus 5500 Platform supports the following application scenarios, many of which require the

installation of other products:

•As an access-layer switch, it can be used purely as a 1- and 10-Gigabit Ethernet switch,

consolidating 10 Gigabit Ethernet connections into a smaller number of server connections trunked

to the aggregation layer.

•As a smaller-scale aggregation switch, it can be used as a Layer 3 1- and 10-Gigabit Ethernet switch,

consolidating multiple 1- and 10-Gigabit Ethernet connections from a data center access layer.

•In conjunction with the Cisco Nexus 2248T GE Ethernet Fabric Extender, the Cisco Nexus 5500

Platform can be a high-density 1-Gigabit Ethernet switching system, consolidating more than 900

Gigabit Ethernet connections within a single management plane.

•In conjunction with the Cisco Nexus 2232T 10GE Fabric Extender, it can be a high-density

switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single

management plane.

•In conjunction with the Cisco Nexus 2224TM 10GE Fabric Extender, it can be a high-density

switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single

management plane

•As a rack-level I/O consolidation platform, the switch carries Ethernet traffic from servers to the

aggregation layer and carries FC traffic to existing Fibre Channel SANs.

•As a crucial element in data center I/O consolidation, the switch enables I/O consolidation at the

access layer and provides interoperability with the Cisco Nexus 5500 Platform and other

standards-based products.

This section describes the Cisco Nexus 5500 Platform switches and contains these sections:

•Cisco Nexus 5596UP Switch, page 1-2

1-2

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

•Cisco Nexus 5596T Switch, page 1-12

•Cisco Nexus 5548UP and 5548P Switches, page 1-17

Cisco Nexus 5596UP Switch

This section describes the Cisco Nexus 5596UP switch and its components. This section includes the

following topics:

•Features, page 1-2

•Chassis, page 1-2

•Expansion Modules, page 1-4

•Ports, page 1-7

•Power Supply, page 1-8

•Fan Module, page 1-10

•Transceivers, page 1-11

Features

The Cisco Nexus 5596UP switch is a top-of-rack, 10-Gigabit Ethernet and Fibre channel over Ethernet

(FCoE) switch offering up to 1920 Gigabit throughput and up to 96 ports. The switch has 48 1- and

10-Gigabit Ethernet and FCoE ports and three expansion slots. As a top-of-rack switch, all the servers

in the rack connect to the Cisco Nexus 5596UP switch, and it connects to the LAN or SAN.

The Cisco Nexus 5596UP switch has the following features:

•48 fixed 1- and 10-Gigabit Ethernet server connection ports on the back of the switch

•Three slots on the back of the switch for optional expansion modules, which can be either a 16-port

10-Gigabit generic expansion module 2 (GEM2) or a layer 3 GEM2

•Two slots on the front of the switch for hot swap-capable power supplies, which provide

front-to-back airflow for cooling (the Cisco Nexus 5596T and 5596UP switches alternatively

support back-to-front [port-side intake] airflow)

•Four slots on the front of the switch for hot swap-capable fan modules.

•Layer 2 or Layer 3 I/O modules

•One USB port on the front of the switch

Note Hot swapping of normal air flow fans and power supplies with reverse airflow fans and power supplies

is not supported on the Cisco Nexus 5000 switches. Hot swapping of fans and power supplies is only

supported if they are replaced with the same direction parts.

Chassis

The Cisco Nexus 5596UP chassis is 2 RU or 3.47 inches (8.8 cm) tall, 17.3 inches (43.9 cm) wide, and

29.5 inches (74.9 cm) deep. It is designed to be mounted in a standard 19-inch wide rack. The front of

the switch, shown in Figure 1-1, has a USB port, four Ethernet and ports (two cross-connect ports, one

management port, and one console port), two power supplies, and four fan modules.

1-3

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

Figure 1-1 Front View of the Cisco Nexus 5596UP Switch

The management and console ports are in a 2 x 2 stacked RJ-45 jack. Figure 1-2 shows a close-up view

of these ports. For information about the connector port LEDs, see Table D-1 on page D-2.

Figure 1-2 Management and Console Ports

237867

1USB port 4System status LED

2Management and console ports (two RJ-45 Ethernet connector

ports on the left, a RJ-45 network management connector on the

upper right, and a console connector on the lower right)

5Two power supplies

3Identifier LED 6Four fan modules

2 3

239021

1-4

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

The rear of the Cisco Nexus 5596UP chassis, shown in Figure 1-3, has 48 fixed 10-Gigabit Ethernet data

ports on the bottom and three slots for optional expansion modules on top.

Figure 1-3 Rear View of the Cisco Nexus 5596UP Switch

Note The L1/L2/Mgmt1 ports are not usable. They are disabled at this time.

Expansion Modules

Expansion modules allow the Cisco Nexus 5596UP switch to be configured as cost-effective 10-Gigabit

Ethernet switches and as I/O consolidation platforms with native Fibre Channel connectivity.

The Cisco Nexus 5596UP switch has three slots that can be used for the following optional expansion

modules:

•4-port QSFP expansion module

•16-port Universal (Fibre Channel and Ethernet) GEM (N55-M16UP) that provides 8-, 4-, 2-, or

1-Gbps Fibre Channel and 1- or 10-Gigabit Ethernet ports

1Internal cross-connect ports 4Network management port

2Link LED (left LED) 5Console port

3Activity LED (right LED)

237866

1Expansion modules, shown here with three

16-port Universal GEM2 modules (can also

have Layer 3 GEM2 modules)

3System status LED

2Identifier LED 448 fixed 1- and 10-Gigabit Ethernet ports

1-5

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

•Layer 3 GEMs (N55-M160L3 and N55-M160L3-V2) provide 160 Gbps of Layer 3 services. The

N55-M160L3-V2 uses a newer version of the Layer 3 ASIC that enables higher table sizes in a future

software release from 8K host entries to 16K host entries or from 4K multicast routes to 8K

multicast routes (IPv4).

You can hot swap the expansion modules during operations, except the Layer 3 GEMs. You must power

down the switch before you can insert or remove the Layer 3 GEMs.

This section includes the following topics:

•4-port QSFP GEM, page 1-5

•16-port Universal GEM2, page 1-5

•Layer 3 GEM, page 1-6

4-port QSFP GEM

he 16-port Universal GEM2, shown in Figure 1-5, has 16 8-, 4-, 2-, or 1-Gbps Fibre Channel or 1- and

10-Gigabit Ethernet ports. This module is a field-replaceable unit (FRU) that you can hot swap during

operations.

Figure 1-4 16-Port Universal GEM2

16-port Universal GEM2

The 16-port Universal GEM2, shown in Figure 1-5, has 16 8-, 4-, 2-, or 1-Gbps Fibre Channel or 1- and

10-Gigabit Ethernet ports. This module is a field-replaceable unit (FRU) that you can hot swap during

operations.

237977

1-6

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

Figure 1-5 16-Port Universal GEM2

See Figure 1-7 on page 1-7 to see how ports are grouped and numbered on the Fibre Channel plus

Ethernet expansion module.

Layer 3 GEM

The Layer 3 GEMs (N55-M160L3 and N55-M160L3-V2), shown in Figure 1-6, provide 160 Gbps of

Layer 3 services. The expansion modules are field-replaceable units (FRUs). The N55-M160L3-V2 uses

a newer version of the Layer 3 ASIC that enables higher table sizes in a future software release from 8K

host entries to 16K host entries or from 4K multicast routes to 8K multicast routes (IPv4).

The Layer 3 GEMs are not hot swappable and can be inserted and removed only when the switch is

powered down.

237977

1Status LED 316 ports supporting 8-, 4-, 2-, or 1-Gbps transceivers or 1- and

10-Gigabit transceivers

2Eject lever 4Captive screw that locks the eject lever in a closed position

1-7

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

Figure 1-6 Layer 3 GEM2

Ports

Each port on the Cisco Nexus 5596UP switch is numbered, and groups of ports are numbered based on

their function. The ports are numbered top to bottom and left to right. The 48 fixed ports support 8-, 4-,

2-, or 1-Gbps Fibre Channel transceivers and 1- or 10-Gigabit Ethernet transceivers.

Figure 1-7 shows how ports are numbered and grouped by function for both the fixed ports and the Fibre

Channel plus Ethernet expansion module ports.

Figure 1-7 Port Numbering of Fixed Ports and Fibre Channel Plus Ethernet Expansion Module Ports

237976

1Status LED 3Captive screw that locks the eject lever in a

closed position

2Ejector lever

1 3 5 7 9 11 13 15

2 4 6 8 10 12 14 16

1 3 5 7 9 11 13 15

2 4 6 8 10 12 14 16

17 19 21 23 25 27 29 31

18 20 22 24 26 28 30 32

33 35 37 39 41 43 45 47

34 36 38 40 42 44 46 48

1 3 5 7 9 11 13 15

2 4 6 8 10 12 14 16

1 3 5 7 9 11 13 15

2 4 6 8 10 12 14 16

237978

1Port numbering for the 16-port GEM 2Port numbering for the 48 fixed ports

1-8

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

Power Supply

The Cisco Nexus 5596UP uses a front-end power supply. The chassis has slots for two power supplies.

The Cisco Nexus 5596UP switch is fully functional with one power supply, but you can include a second

power supply for power redundancy.

Table 1-1 lists the power supplies that you can order with the Cisco Nexus 5596UP and 5596T switches.

Note Front to Back (FAF) Airflow and DC Power Supply is now supported for the Cisco Nexus 5596T. For

details see the Cisco Nexus 5500 Datasheet.

Figure 1-8 shows an AC power supply. For more information on the LEDs, see Table D-1 on page D-2.

Table 1-1 Power Supplies for the Cisco Nexus 5596UP and 5596T switches

Part Number Power Supply

N55-PAC-1100W Cisco Nexus 5596UP PSU Port-Side Exhaust Airflow module, A/C,

100-240V, 1100W

N55-PAC-1100W(=) Cisco Nexus 5596UP PSU Port-Side Exhaust Airflow module spare, A/C,

100-240V, 1100W

N55-PAC-1100W-B Cisco Nexus 5596UP/5596T PSU Port-Side Intake Airflow module, A/C,

100-240V, 1100W

N55-PAC-1100W-B(=) Cisco Nexus 5596UP/5596T PSU Port-Side Intake Airflow module spare,

A/C, 100-240V, 1100W

N55-PDC-1100W Cisco Nexus 5596UP/5596T PSU DC Port-Side Exhaust module, 1100 W

N55-PDC-1100W(=) Cisco Nexus 5596UP/5596T PSU DC Port-Side Exhaust module spare,

1100 W

NXA-PHV-1100W Cisco Nexus 5500/6000 Platinum HV-AC-DC PS, Port side Exhaust airflow,

1100W

NXA-PHV-1100W(=) Cisco Nexus 5500/6000 Platinum HV-AC-DC PS, Port side Exhaust airflow,

1100W, spare

NXA-PHV-1100W-B Cisco Nexus 5500/6000 Platinum HV-AC-DC PS, Port side Intake airflow,

1100W

NXA-PHV-1100W-B(=) Cisco Nexus 5500/6000 Platinum HV-AC-DC PS, Port side Intake airflow,

1100W, spare

1-9

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

Figure 1-8 AC Power Supply for the Cisco Nexus 5596UP Switch

Figure 1-9 shows the NXA-PAC-1100W.

Figure 1-9 NXA-PAC-1100W

Figure 1-10 shows the NXA-PAC-1100W-B

1Failure (top) and Power (bottom) LEDs 3Release lever

2Handle

237868

1-10

Cisco Nexus 5000 Series Hardware Installation Guide

Chapter 1 Overview

Cisco Nexus 5500 Platform Switches

Figure 1-10 NXA-PAC-1100W-B

Figure 1-11 shows NXA-PDC-1100W

Figure 1-11 NXA-PDC-1100W

Note Never leave a power supply slot empty. If you remove a power supply, replace it with another one. If you

do not have a replacement power supply, leave the non functioning one in place until you can replace it.

Fan Module

The Cisco Nexus 5596UP switch has four fan modules. Although the switch can function when a fan

stops functioning within a fan module, if a whole fan module stops functioning, you must replace the fan

module. The Cisco Nexus 5596UP supports the reverse air flow fan tray (N5596UP-FAN-B).

Figure 1-12 shows a fan module.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Schalten Handbücher

Cisco

Cisco SF220-24 Bedienungsanleitung

Cisco

Cisco 200E Series Bedienungsanleitung

Cisco

Cisco Cisco Small Business Unmanaged Switch SR224 Bedienungsanleitung

Cisco

Cisco Nexus 9336C-FX2-E Handbuch

Cisco

Cisco 2960-48TC - Catalyst Switch Bedienungsanleitung

Cisco

Cisco Cisco Small Business Unmanaged Switch SD2008 Bedienungsanleitung

Cisco

Cisco RSP7000 Bedienungs- und Wartungsanleitung

Cisco

Cisco Cisco Line Card 4500 E-Series Bedienungsanleitung

Cisco

Cisco Cisco MDS 9216A - Fabric Switch Bedienungsanleitung

Cisco

Cisco Nexus 9000 Series Bedienungsanleitung

Cisco

Cisco Nexus 9808 NX-OS Handbuch

Cisco

Cisco Catalyst Series Switch 2940 Installationsanleitung

Cisco

Cisco Catalyst 2960-24TC Bedienungsanleitung

Cisco

Cisco Catalyst 8500 Series Originalbetriebsanleitung

Cisco

Cisco Catalyst Express 500 Bedienungsanleitung

Cisco

Cisco TOPSPIN SFS 3012 Montageanleitung

Cisco

Cisco Catalyst Express 520 Bedienungsanleitung

Cisco

Cisco SD2008 Bedienungsanleitung

Cisco

Cisco Nexus 9236C Bedienungsanleitung

Cisco

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module... Installations- und Betriebshandbuch

Cisco

Cisco Catalyst 3850 series Bedienungsanleitung

Cisco

Cisco Cisco Industrial Ethernet 3000 Series Bedienungsanleitung

Cisco

Cisco IE-5000-16S12P Bedienungsanleitung

Cisco

Cisco 2975 - Catalyst LAN Base Switch Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung