Cisco SLM2008PT-NA Bedienungsanleitung
Cisco Small Business
SLM2008 8-Port Gigabit Smart Switch with PD and
AC Power
ADMINISTRATION
GUIDE
© 2009 Cisco Systems, Inc. All rights reserved. OL-19923-01
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and
Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar,
Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert
logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast,
EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the
IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar,
PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient,
TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (0812R)
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide iii
Contents
Chapter 1: Introduction 1
Chapter 2: Getting to Know the Cisco SLM2008 Switch 2
Front Panel 2
Back Panel 3
Side Panels 3
Chapter 3: Connecting the Cisco SLM2008 Switch 5
Placement Options 5
Desktop Option 5
Wall-Mount Option 6
Connecting the Cisco SLM2008 Switch to the Network 7
Chapter 4: Setting Up the Cisco SLM2008 Switch 9
Launching the Web-Based Configuration Utility 9
Navigating the Utility 10
System 11
Port 11
VLAN 11
Security 11
QoS 12
STP 12
Statistics 12
Multicast 13
Admin 13
Chapter 5: Advanced Configuration 14
Setup 14
Using the Help System 14
System 16
Configuring System Settings 16
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide iv
Contents
Port 18
Configuring Port Settings 18
Configuring Static Link Aggregation 20
Configuring LACP Settings 21
Displaying LACP Status 23
VLAN 24
Configuring VLAN Settings 24
Configuring VLAN Port Settings 25
Security 27
Configuring 802.1X Settings 27
Configuring 802.1X Parameter 30
Configuring Static MAC Address 32
Configuring Management Access List 33
Configuring Storm Control 34
QoS 35
Configuring QoS Settings 35
STP 41
Configuring STP Settings 41
Displaying STP Status 43
Statistics 44
Displaying Statistics Overview 45
Displaying IGMP Status 46
Multicast 47
Configuring IGMP Settings 47
Admin 49
Configuring Ping 50
Configuring Port Mirror 51
Restoring Factory Default 52
Rebooting the Switch 53
Saving Configuration Settings 54
Upgrading the Firmware 55
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide v
Contents
Appendix A: Specifications 57
Appendix B: Where to Go From Here 60
1
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 1
Introduction
The Cisco SLM2008 8-port Gigabit Smart Switch with PD and AC Power allows
you to upgrade your existing network by replacing your current workgroup hub or
switch. At the same time, you can configure advanced features for security, QoS,
and Spanning Tree using its web-based configuration utility.
The Cisco SLM2008 switch not only allows you to upgrade to gigabit speeds but
also allows you to expand your network securely. The Gigabit Smart Switch with
PD have virtual LAN (VLAN) capabilities to restrict the flow of multicast and
broadcast traffic. Stations within a given VLAN can freely communicate using
either unicast or multicast addressing. Communication between different VLANs is
not possible.
Extensive QoS features make the solution ideal for real-time applications like Voice
and Video. The 4 priority queues together with the Weighted Round Robin and
Strict Priority scheduling techniques facilitate efficient coexistence of real-time
traffic with data traffic allowing them each to meet their QoS needs. Individual
users or applications can be prioritized above others using various Class of
Service options - by port, layer 2 priority (802.1p), and layer 3 priority (TOS or
DSCP). Intelligent broadcast and multicast storm controls minimize and contain the
effects of these types of traffic on regular traffic. IGMP Snooping limits
bandwidth-intensive video traffic to only the requestors without flooding all users.
Incoming traffic can be policed and outgoing traffic can be shaped allowing you to
control network access and traffic flow.
There are features that allow you to expand and grow your network of switches.
Link aggregation allows multiple high-bandwidth trunks between switches to be
setup. This also provides a level of reliability in that the system continues to
operate if one of the links breaks. Spanning Tree (STP) allow you to build a mesh of
switches increasing the availability of the system.
2
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 2
Getting to Know the Cisco SLM2008 Switch
This chapter describes the external features of the Cisco SLM2008 8-Port Gigabit
Smart Switch with PD and AC Power. The following sections are included:
•Front Panel, page 2
•Back Panel, page 3
•Side Panels, page 3
Front Panel
The LEDs are located on the front panel of the switch.
System—(Green) Lights up when the switch is powered on.
1-8—(Green) Each LED lights up when there is a connection made through its
corresponding port. The LEDs flash when there is activity on corresponding ports.
Getting to Know the Cisco SLM2008 Switch
Back Panel
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 3
2
Back Panel
The Ethernet ports are located on the back panel of the switch.
Port 1—This port supports the IEEE 802.3af Power-over-Ethernet (PoE) PD
standard, which enables a system to receive data and supply electrical power to
the switch over a standard twisted-pair cable in an Ethernet network. Any 802.3af-
compliant PSE device, such as a PoE switch, can directly supply power to the
switch. Simply connect a standard twisted-pair cable from a PoE switch to Port 1
on the switch. Using PoE to power the switch eliminates the need to use the power
adapter and AC power.
To connect a device to a port, use a Category 5 network cable.
Ports 1-8—These RJ-45 ports support network speeds of either 10 Mbps,
100 Mbps, or 1000 Mbps and can operate in half and full-duplex modes. Auto-
sensing technology enables each port to automatically detect the speed of the
device connected to it and adjust its speed and duplex accordingly.
Side Panels
The reset button and power port are located on the right side panel of the switch.
Getting to Know the Cisco SLM2008 Switch
Side Panels
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 4
2
Reset Button—The reset button can be used to reset or reboot the switch.
•Reboot—If the button is pressed for less than 10 seconds, the switch will
reboot.
•Restore Factory Defaults—If the button is pressed for longer than 10
seconds, the switch settings will be restored to the factory defaults and the
system reboots.
NOTE The switch can only be configured using the web-based utility. If you cannot
access the web-based utility because of configuration changes you’ve made, you
can reset the switch to the factory defaults.
Power Port—The power port is where you will connect the AC power. The
security slot is located on the left side panel of the switch.
Security Slot—The security slot can be used to attach a lock to the switch.
3
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 5
Connecting the Cisco SLM2008 Switch
This chapter will guide you through the hardware installation for the Cisco
SLM2008 8-Port Gigabit Smart Switch with PD and AC Power. The following
sections are included:
•Placement Options, page 5
•Connecting the Cisco SLM2008 Switch to the Network, page 7
Placement Options
When you choose a location for the switch, observe the following guidelines:
•Make sure that the switch is accessible and that the cables can be easily
connected.
•Keep cabling away from sources of electrical noise, power lines, and
fluorescent lighting fixtures.
•Position the switch away from water and moisture sources.
•To ensure adequate air flow around the switch, be sure to provide a
minimum clearance of two inches (50 mm).
•Do not stack free-standing switches more than four units high.
Desktop Option
For desktop acement, set the Cisco SLM2008 switch horizontally on a surface so
that it sits on its four rubber feet.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Cisco Schalten Handbücher
Cisco
Cisco Nexus 9364C-GX Handbuch
Cisco
Cisco Nexus 9316D-GX Handbuch
Cisco
Cisco Catalyst 3120G Gebrauchsanweisung
Cisco
Cisco CSS-11051-AC Handbuch
Cisco
Cisco Catalyst 3560E-24TD Abmessungen
Cisco
Cisco WS-C4003 - Catalyst 4000 Chassis Switch Bedienungsanleitung
Cisco
Cisco 110 Series Bedienungsanleitung
Cisco
Cisco Catalyst 3750-X Series Bedienungsanleitung
Cisco
Cisco Small Business 300 Bedienungsanleitung
Cisco
Cisco IE 4000 Bedienungsanleitung
Cisco
Cisco Catalyst 2960-X Installationshandbuch
Cisco
Cisco AJ732A - MDS 9134 Fabric Switch Bedienungsanleitung
Cisco
Cisco SD216 Referenzhandbuch
Cisco
Cisco Catalyst Series Switch 2940 Bedienungsanleitung
Cisco
Cisco MDS 9000 Series Bedienungsanleitung
Cisco
Cisco Catalyst 3560-X Series Installationshandbuch
Cisco
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module... Bedienungsanleitung
Cisco
Cisco Catalyst 2960 Series Betriebsanleitung
Cisco
Cisco 3750G-12S-E - Catalyst Switch - Stackable Abmessungen
Cisco
Cisco SPS208G Bedienungsanleitung
