Cisco SRW2008MP Kurzanleitung

Inhaltsverzeichnis

Andere Cisco Schalten Handbücher

Cisco

Cisco SD208 Bedienungsanleitung

Cisco

Cisco N9K-C93108TC-FX Handbuch

Cisco

Cisco MGC Node Manager Bedienungsanleitung

Cisco

Cisco Video Switch Bedienungsanleitung

Cisco

Cisco Nexus 5500 Series Bedienungsanleitung

Cisco

Cisco 6130 NI-1 Handbuch

Cisco

Cisco SRW224G4 - Small Business Managed Switch Bedienungsanleitung

Cisco

Cisco ME 3400 Series Bedienungsanleitung

Cisco

Cisco Nexus 9504 Handbuch

Cisco

Cisco Catalyst 4000 series Bedienungsanleitung

Cisco

Cisco Nexus 3550-T Handbuch

Cisco

Cisco Nexus 9332C Handbuch

Cisco

Cisco Catalyst Express 500-24LC Bedienungsanleitung

Cisco

Cisco AJ732A - MDS 9134 Fabric Switch Bedienungsanleitung

Cisco

Cisco BTS 10200 Softswitch Bedienungsanleitung

Cisco

Cisco Nexus 7000 Series Installations- und Betriebsanleitung

Cisco

Cisco Catalyst IE 3 00 Series Bedienungsanleitung

Cisco

Cisco WS-C3560X-48PF-L Handbuch

Cisco

Cisco IE 3000 Handbuch

Cisco

Cisco BPX-BXM-T3-12 Bedienungsanleitung

Cisco

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module... Bedienungsanleitung

Cisco

Cisco Business 250 Series Bedienungsanleitung

Cisco

Cisco MGX 8850 PXM1E Installationshandbuch

Cisco

Cisco SRW2008 - Small Business Managed Switch Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

SRW2008MP Firmware Upgrade FAQ

Document ID: 109169

Questions

Introduction

How do I upgrade the firmware on the SRW2008MP?

Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business

products (formerly Linksys Business Series).

Refer to Cisco Technical Tips Conventions for information on document conventions.

Q. How do I upgrade the firmware on the SRW2008MP?

A. Complete the appropriate procedure in this section in order to upgrade the firmware on the

SRW2008MP.

Firmware Download

Download new firmware from the Cisco Software Center.

Note: Cisco recommends that you perform all firmware upgrades on your local network.

Firmware Upgrade via Web UI

Enter the IP address for your switch in a browser. For example, if your switch uses

the default IP address, enter http://192.168.1.254 in your browser in order to access

the switch.

1.

On the login screen, enter admin in the User Name field and leave the password

blank.

2.

Go to Admin > Firmware Upgrade.3. Click the via HTTP radio button.4.

Click Browse in order to locate the firmware file.5.

Click Proceed.6.

Note: Do not reset or unplug the power while the firmware upgrade is in progress.

Firmware Upgrade Via TFTP Upgrade

Note: TFTP server software is required for this procedures.

Enter the IP address for your switch in a browser. For example, if your switch uses

the default IP address, enter http://192.168.1.254 in your browser in order to access

the switch.

1.

On the login screen, enter admin in the User Name and Password fields.2. Once logged in, go to Admin > Firmware Upgrade.3. Click via TFTP, and then click the Upgrade radio button4.

Choose Software Image from the File Type drop−down list.5. In the TFTP server field, enter the IP address of the computer that runs the TFTP

software.

6.

In the Destination File field, enter the file name for the firmware file.7. Click Proceed.

Note: Do not reset or unplug the power while the firmware upgrade is in progress.

8.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

© 2008 − 2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of

Cisco Systems, Inc.

Updated: Dec 12, 2008 Document ID: 109169