Cisco Unified IP Phone Expansion Module 7915 Bedienungsanleitung

PHONE GUIDE

Cisco Unified IP Phone Expansion

Module 7915

INCLUDING LICENSE AND WARRANTY

1Introducing the Cisco Unified IP Phone Expansion

Module 7915

2Installing the Cisco Unified IP Phone

Expansion Module 7915

3Features of the Cisco Unified IP Phone

Expansion Module 7915

4Using the Cisco Unified IP Phone

Expansion Module 7915

5Troubleshooting the Cisco Unified IP Phone

Expansion Module 7915

6Technical Specifications for the Cisco Unified IP

Phone Expansion Module 7915

7Where to Find More Information

8Obtaining Documentation and Submitting a

Service Request

9Cisco One-Year Limited Hardware Warranty Terms

1 Introducing the Cisco Unified

IP Phone Expansion Module 7915

The Cisco Unified IP Phone Expansion Module 7915 attaches

to your Cisco Unified IP Phone 7962G, Cisco Unified

IP Phone 7965G or Cisco Unified IP Phone 7975G, adding up

to 24 extra line appearances or programmable buttons to your

phone. Attaching a second Expansion Module to your

Cisco Unified IP Phone adds a total of 48 extra line appearances

or programmable buttons to your phone. See Figure 1.

Note If you are running the SCCP protocol, you can

configure a maximum of 42 lines on your phone. For

example, if you configure two 24-line Cisco Unified IP

Phone Expansion Modules on a Cisco Unified IP Phone

7962G or Cisco Unified IP Phone 7965G, you will have

a total of 54 lines (48 lines from the modules in

addition to the 6 lines on the phone). However, only the

first 42 lines will be available for use.

The programmable buttons can be configured as phone line

buttons, speed-dial buttons, phone service buttons or phone

feature buttons.

Figure 1 Cisco Unified IP Phone 7962G with Two Expansion

Modules

187195

Before You Begin

Before you begin installing your Cisco Unified IP Phone

Expansion Module 7915, read each of these sections:

• Package Contents, page 3

• Footstand Kits, page 3

• Additional Equipment, page 4

• Safety Information, page 4

Package Contents

Verify that your package contents includes the following items:

• One Cisco Unified IP Phone Expansion Module 7915

• One interface cable

Footstand Kits

In addition to the package contents, you also need a Footstand

Kit (separate orderable item). If you are attaching one

Cisco Unified IP Phone Expansion Module 7915, you need the

single Footstand Kit. If you are attaching two Expansion

Module 7915s, you need the double Footstand Kit. The

Footstand Kit contains:

• One support bar (single with one thumbscrew, or double

with two thumbscrews)

• One footstand

Additional Equipment

You also need the following equipment.

• Small flat head screwdriver—for use during the installation

• Power supply unit—depending on how many

Expansion Modules you are installing and how your

Cisco Unified IP Phone is powered, you will require power

supply unit(s) as follows:

Power over the Ethernet to

your Cisco Unified IP Phone

With one or two Expansion

Modules, you need a power

supply unit (separate

orderable item).

Power supply to your

Cisco Unified IP Phone

With one Expansion Module,

you do not need a power

supply unit.

With two Expansion

Modules, you need a power

supply unit (separate

orderable item).

Note Use of a non-Cisco certified power supply unit might

not work and voids the Cisco Unified IP Phone

Expansion Module 7915 product warranty.

Safety Information

The following safety warnings are for the Expansion

Module 7915. Read these notices before you install or use the

Expansion Module 7915. For translated warnings, refer to the

Regulatory Compliance and Safety Information for the Cisco

Unified IP Phone 7900 Series.

Installing and Using Your Expansion Module 7915

Read the following safety notices before installing or using your

Expansion Module 7915:

Warning IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation

that could cause bodily injury. Before you work on any

equipment, be aware of the hazards involved with electrical

circuitry and be familiar with standard practices for

preventing accidents. Use the statement number provided at

the end of each warning to locate its translation in the

translated safety warnings that accompanied this device.

SAVE THESE INSTRUCTIONS

Warning

Read the installation instructions before you

connect the system to its power source.

Warning

Ultimate disposal of this product should be

handled according to all national laws and

regulations.

Warning

Do not work on the system or connect or

disconnect cables during periods of lightning

activity.

Warning

To avoid electric shock, do not connect safety

extra low voltage (SELV) circuits to telephone

network voltage (TNV) circuits. LAN ports contain

SELV circuits, and WAN ports contain TNV

circuits. Some LAN and WAN ports use RJ-45

connectors. Use caution when connecting cables.

Using an External Power Supply

Read the following warnings before you use the Cisco certified

external power supply with the Expansion Module 7915:

Caution Only use the specified Cisco-approved power

supply on this product.

Warning

This product relies on the building's installation

for short-circuit (over current) protection. Ensure

that a fuse or circuit breaker no larger than 120

VAC, 15A U.S. (240 VAC, 10A international) is used

on the phase conductors (all current-carrying

conductors).

Warning

The device is designed to work with TN power

systems.

Warning

The plug-socket combination must be accessible

at all times because it serves as the main

disconnecting device.

Warning

The power supply must be placed indoors.

2 Installing the Cisco Unified

IP Phone Expansion Module 7915

Note To ensure a successful installation of the

Expansion Module 7915, make sure you have read the

entire “Before You Begin” section on page 3.

To install the Cisco Unified IP Phone Expansion Module 7915,

perform the following tasks.

1. Remove the Footstand from the Cisco Unified IP Phone.

2. Connect the Support Bar to the Cisco Unified IP Phone.

3. Connect the Expansion Module 7915 to the Support Bar.

4. Connect the Interface Cable.

5. Connect the Power Supply Unit.

6. Connect the Footstand.

7. Connect a Laptop Cable Lock (optional).

Refer to the detailed instructions and corresponding

illustrations that follow for each of these high-level tasks.

Caution To ensure a successful installation, verify with your

system administrator that your phone is ready for

the Cisco Unified IP Phone Expansion

Module 7915 and that Cisco Unified

Communications Manager is installed and

configured for the Cisco Unified IP

Phone Expansion Module 7915. Make sure that

you have all of the parts that you need (see the

“Before You Begin” section on page 3).

Remove the Footstand from the Cisco Unified

IP Phone

Refer to Figure 2 and the steps that follow.

Figure 2 Removing the Footstand

63147

Step 1 Unplug the Cisco Unified IP Phone network and power

connections.

Step 2 Unplug the handset, and unplug the headset if one is

attached to the phone.

Step 3 Turn the Cisco Unified IP Phone over and lay it on a

protected flat surface to prevent it from being

scratched.

Step 4 Locate the two foot pins on the footstand.

Step 5 Use a flat head screwdriver to carefully push on one of

the foot pins to release it. Then carefully push on the

other foot pin to release it.

Note You may have to lift and hold the

Cisco Unified IP Phone to support it when

pushing the foot pins. When pushing on the

footpins, push away from your body.

Step 6 Lift off the footstand and store it separately.

Connect the Support Bar to the Cisco Unified

IP Phone

Refer to Figure 3 and the steps that follow.

Figure 3 Connecting the Support Bar

140969

Step 1 Position the support bar on the back of the

Cisco Unified IP Phone so that it fits flush with the

phone.

Step 2 Locate the two connector pins.

Step 3 Use a flat head screwdriver to carefully push each of the

connector pins so that the support bar is firmly fastened

to the Cisco Unified IP Phone.

Connect the Expansion Module 7915 to the

Support Bar

Refer to Figure 4 and the steps that follow.

Figure 4 Connecting the Expansion Module to the

Support Bar

1Open slots on the Cisco Unified IP Phone

Expansion Module 7915

2Hooks on the support bar

3Thumbscrews

Step 1 Position the phone so that the front of the phone is

facing up.

Step 2 Line up the two open slots on the bottom of the

Cisco Unified IP Phone Expansion Module 7915 with

the two hooks on the support bar.

Andere Handbücher für Unified IP Phone Expansion Module 7915

Inhaltsverzeichnis

Andere Cisco Telefonzubehör Handbücher

Cisco

Cisco Small Business SPA2102 Bedienungsanleitung

Cisco

Cisco CP-7914 - 7914 - Key Expansion Module Bedienungsanleitung

Cisco

Cisco BEKEM Bedienungsanleitung

Cisco

Cisco WBP54G - Small Business Pro Wireless-G... Bedienungsanleitung

Cisco

Cisco SPA500S Bedienungsanleitung

Cisco

Cisco 7916 Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco Small Business Pro SPA 504G Bedienungsanleitung

Cisco

Cisco PAP2T Bedienungsanleitung

Cisco

Cisco SPA500S Bedienungsanleitung

Cisco

Cisco 7916 Bedienungsanleitung

Cisco

Cisco ATA 187 Bedienungsanleitung

Cisco

Cisco SPA500DS Bedienungsanleitung

Cisco

Cisco UC 520 Bedienungsanleitung

Cisco

Cisco Small Business Pro SPA9000 Bedienungsanleitung

Cisco

Cisco WBP54G - Small Business Pro Wireless-G... Bedienungsanleitung

Beliebte Telefonzubehör Handbücher anderer Marken

BT DIVERSE 5400 Bedienungsanleitung

Tadiran Telecom

Tadiran Telecom EMERALD ICE Bedienungsanleitung

Musicam

Musicam FieldFone II Bedienungsanleitung

Polycom

Polycom KIRK KIRK 4040 Technisches Datenblatt

TIPTEL

TIPTEL DECT Set 50 Bedienungsanleitung

Panasonic

Panasonic KX-UDS124 Bedienungsanleitung

BT BT7600 Technisches Datenblatt

View

View VP-PC Bedienungsanleitung

Baldwin Boxall

Baldwin Boxall BT8 Bedienungsanleitung

SMC Networks

SMC Networks SMCDPCR-AP Bedienungsanleitung

SkyLink

SkyLink SD-001 Bedienungsanleitung

Nera

Nera ISDN Bedienungsanleitung

MCheeta

MCheeta CT-CID803 Plus Bedienungsanleitung

YASKAWA

YASKAWA YRC1000 Bedienungsanleitung

Intellitouch

Intellitouch MOH-500E Bedienungsanleitung

Viking

Viking SQRG-12 Gebrauchsanweisung

Clarity

Clarity CE225 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen beocom 1401 Bedienungsanleitung