Cisco IP DECT 6800 Series Bedienungsanleitung

Your Handset

•Your Handset, on page 1

•Getting Started, on page 2

•Buttons and Hardware, on page 3

•Care of Your Handset, on page 11

•Additional Help and Information, on page 13

Your Handset

The Cisco IP DECT 6800 Series is made up of the Cisco IP DECT 210 Multi-Cell Base Station and the Cisco

IP DECT Phone 6825 Handset.

Figure 1: Cisco IP DECT 210 Multi-Cell Base Station and Cisco IP DECT Phone 6825 Handset

The handsets communicate with the base station using Digital Enhanced Cordless Telecommunications (DECT)

to provide call functions.

In this document, the term phone means the handset and the term system means the handset and base station.

Not all features may be supported by your handset. Contact your service provider for the supported features.

Note

Your Handset

Getting Started

Turn On Your Handset

Procedure

Press and hold Power/End until the screen turns on.

Turn Off Your Handset

Procedure

Press and hold Power/End until the screen turns off.

Report an Emergency Situation

Your handset has an emergency button, located at the top of the handset. If set up by your administrator, you

can press this button to raise an alert in an emergency situation. The handset places a call to a predefined

emergency number and automatically turns on the speakerphone.

Procedure

Press and hold Emergency for 3 seconds.

Lock the Handset Keypad

You can manually lock the keypad to stop accidental dialing.

When the keypad is locked, you can only dial emergency numbers.

Note

Your Handset

Getting Started

Procedure

Press and hold Asterisk until the message “Press and hold *” and the key lock icon ( or ) are

displayed on the screen.

Related Topics

Set the Handset Lock and PIN

Set the Timer to Automatically Lock the Handset

Buttons and Hardware

Your handset has many buttons and hardware features that you will use regularly. Use the following figure

and table to identify the important button and hardware features.

Your Handset

Unlock the Handset Keypad

Figure 2: Cisco IP DECT Phone 6825 Handset Buttons and Hardware

Table 1: Cisco IP DECT Phone 6825 Handset Buttons and Hardware

DescriptionName or GroupingItem

Indicator light—Use the light to identify states. You

can configure the event that triggers the red, yellow,

or green LED.

Indicator light (LED)1

Emergency Raises an emergency alarm,

if configured.

Emergency button2

Headset port with cover . Remove the protective

cover and plug in a headset or ear buds (3.5 mm audio

jack).

Headset port3

Your Handset

Buttons and Hardware

DescriptionName or GroupingItem

Softkeys Activate the option

displayed on the screen.

Speaker Toggle the speaker mode on or off for

the handset.

Menu Access directories, settings, status, and

other information.

Navigation cluster Navigation ring and Select

button:

• Navigation ring (outer ring): Move up, down,

left, or right.

•Select button (center of the cluster): select

a menu item.

Answer/Send Answer a ringing call or, after

dialing a number, place the call.

Power/End Turn the handset on or off, or end

a connected call. In menus, the button returns you to

the previous screen.

Softkeys, handset control buttons

(Speaker,Menu), Navigation

cluster, call control buttons

(Answer/Send,Power/End).

Your Handset

Buttons and Hardware

DescriptionName or GroupingItem

Dial numbers and enter letters.

One

• Enter “1” when you dial a number.

• Access voicemail. Press and hold to

automatically dial the voicemail system.

• Enter these special text characters: . ! ? , - " @

+ ; :

Asterisk

• Press and hold to add the plus (+) symbol at the

beginning of a phone number.

Zero

• Enter “0” when you dial a number.

• Press and hold to lock or unlock the keypad.

• Enter a space.

Pound

• Press and hold to silence the handset ringer. If

configured, the handset will vibrate instead.

• Enter this special text characters: #

Use the keys 2 through 9 to enter letters and numbers.

In some languages, additional characters

may be present.

Note

Keypad5

Your Handset

Buttons and Hardware

DescriptionName or GroupingItem

Volume

•When the handset is idle, change the ring volume

or turn off the ringer.

• During a call, control the speaker volume for the

active handset, headset, or speaker.

Mute Toggle the mute feature on or off.

Volume and Mute buttons6

Navigation

Use the outer ring of the Navigation cluster to scroll through menus and to move between fields. Use the inner

Select button of the Navigation cluster to select menu items.

Supported Characters

When you input information, the Cisco IP DECT Phone 6825 Handset supports the following characters:

Your Handset

Navigation

Figure 3: Supported Characters

Handset Screen Features

The screen shows information about your handset such as directory number, date and time, and softkeys. The

screen is made up of three sections: the header row, the middle section, and the footer row.

Figure 4: Handset Screen

At the top of the screen is the header row. The header row displays the radio signal strength and

battery charge, as well a number of icons. The icons display when features are active.

If your organization uses the BroadWorks Shared Call Appearance feature, a row of boxes displays

immediately below the header row.

Your Handset

Handset Screen Features

The middle of the screen displays the information associated with the handset: date and time,

configured handset owner, and handset phone number.

The bottom row of the screen contains the softkey labels. Each label indicates the action for the

softkey button below the screen. Sometimes, icons are displayed above the softkey labels.

Related Topics

BroadWorks Shared Call Appearance

Header Icons

The header icons tell you about the handset state. This section displays the header icons and gives their

meaning. The header row icons can be different when do not disturb (DND) is enabled.

Audio Path Icons

DescriptionDND Mode IconIcon

Speaker is off

Headset in use.

Handset is muted.

Bluetooth Icons

DescriptionDND Mode IconIcon

Bluetooth is connected.

Bluetooth is disconnected.

Network Icons

DescriptionDND Mode IconIcon

No network connection.

Weak network connection.

Good network connection.

Better network connection.

Best network connection

Your Handset

Header Icons

Battery Icons

DescriptionDND Mode IconIcon

Battery is depleted. Recharge the battery to use the handset.

Battery is 1% to 24% charged. Recharge the battery as soon as

possible.

Battery is 25% to 49% charged.

Battery is 50% to 74% charged.

Battery is 75% to 100% charged.

Battery is charging.

Call-Related Icons

DescriptionDND Mode IconIcon

Answered call

Dialed call

Do not disturb is enabled.

Phone is forwarded.

Voicemail message waiting.

Missed call

Other Icons

DescriptionDND Mode IconIcon

Handset keypad is locked.

Message

Differences Between Phone Calls and Lines

We use the terms lines and calls in very specific ways to explain how to use your phone.

Your Handset

Differences Between Phone Calls and Lines

Andere Handbücher für IP DECT 6800 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Telefon Handbücher

Cisco

Cisco Small Business Pro SPA 504G Bedienungsanleitung

Cisco

Cisco 6900 Series Bedienungsanleitung

Cisco

Cisco CP-8865 Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco BroadSoft BroadWorks Spectralink 84 Series Bedienungsanleitung

Cisco

Cisco Small Business Pro SPA 508G Gebrauchsanweisung

Cisco

Cisco 8945 Bedienungsanleitung

Cisco

Cisco UNIFIED 9971 Bedienungsanleitung

Cisco

Cisco Small Business Pro SPA 509G Bedienungsanleitung

Cisco

Cisco SPA525 Bedienungsanleitung

Cisco

Cisco SPA 303 Bedienungsanleitung

Cisco

Cisco 3905 Bedienungsanleitung

Cisco

Cisco i3 Bedienungsanleitung

Cisco

Cisco SPA Phones Bedienungsanleitung

Cisco

Cisco 6945 Series Bedienungsanleitung

Cisco

Cisco 8841 Bedienungsanleitung

Cisco

Cisco 3951 Bedienungsanleitung

Cisco

Cisco VOICEMAXX CE 8811 Benutzerhandbuch

Cisco

Cisco 500 Series Bedienungsanleitung

Cisco

Cisco 8851 Bedienungsanleitung

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Sicherheitsleitfaden

Cisco

Cisco 7821 Referenzhandbuch

Cisco

Cisco Small Business Pro SPA 504G Referenzhandbuch

Cisco

Cisco 7945 Series Bedienungsanleitung

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung

Ericsson

Ericsson Dialog 3213 Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung