Cisco WRV210 - Wireless-G VPN Router Bedienungsanleitung

Cisco Small Business

WRV210 Wireless-G VPN Router with RangeBooster

ADMINISTRATION

GUIDE

CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco Ironport, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect, Cisco Stackpower,

Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flip Video, Flip Video

(Design), Flipshare (Design), Flip Ultra, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Store, and

Flip Gift Card are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP,

CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity,

Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS,

iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking

Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to

Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States

and certain other countries.

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a

partnership relationship between Cisco and any other company. (0907R)

Cisco Small Business WRV210 Administration Guide 3

Contents

Chapter 1: Introduction 6

Product Overview 6

Features 6

Front Panel 7

Back Panel 8

Initial Installation 8

Placement Options 9

Desktop Option 9

Wall Option 9

Connecting the Equipment 9

Verifying the Hardware Installation 11

Configuring the Internet Connection 12

Securing the Wireless Network 13

Getting Started in the Configuration Utility 16

Logging In 16

Navigating through the Pages 17

Saving Your Changes 17

Viewing the Help Files 17

Chapter 2: Setting Up the Network 18

Configuring the Basic Settings 18

Localizing the Configuration Utility 19

Setting Up the Internet Connection 20

Setting Up the Local Network 23

Adjusting the Time Settings 24

Setting Up Virtual LANs 25

Using DDNS to Map Domain Names to Your Network 26

DynDNS.org Setup 27

TZO.com Setup 28

Cloning a MAC Address for Your Internet Connection 29

Setting Up Advanced Routing 30

Configuring Dynamic Routing 31

Cisco Small Business WRV210 Administration Guide 4

Contents

Setting Up Static Routing 32

Chapter 3: Configuring the Wireless Network 34

A Note About Wireless Security 34

Wireless Security Tips 34

General Network Security Guidelines 36

Enabling Your Wireless Networks 37

Wireless > Wireless Security 39

Controlling Access to the Wireless Network 43

Adjusting the Advanced Wireless Settings 45

Configuring a Wireless Distribution System (WDS) 47

Chapter 4: Configuring the Firewall 49

Preventing Attacks 50

Enabling Port Forwarding to Allow Access to Services 51

Using Port Triggering to Allow Access to Applications 54

Configuring a DMZ to Allow Access to All Ports of a Server 55

Restricting Users’ Access to the Internet 57

Blocking Web Access with URL Filtering 59

Chapter 5: Configuring a Virtual Private Network (VPN) 61

Managing the VPN Users and Certificates 61

Managing the VPN Users 63

Managing VPN Certificates 65

Configuring VPN Passthrough 66

VPN > IPSec VPN 68

Monitoring the IPSec VPN Tunnels 73

Chapter 6: Configuring Quality of Service (QoS) 75

Configuring QoS Settings for Specified Applications 75

Priority Queue QoS Type 76

Cisco Small Business WRV210 Administration Guide 5

Contents

Bandwidth Allocation QoS 77

Configuring QoS Settings for Specified Ports 78

Chapter 7: Administration 80

Managing Access and Configuring Other Management Options 80

Resetting the Admin Password 81

Managing LAN and WAN Access to the Configuration Utility 82

Configuring SNMP Settings for Status Reporting 84

Configuring Universal Plug and Play (UPnP) Settings 85

Backing and Restoring a Configuration 86

Setting Up Alerts and System Logs 87

Performing Diagnostic Tests 89

Reverting to the Factory Default Settings 91

Upgrading the Firmware 92

Rebooting the Router 94

Chapter 8: Monitoring the Status of the Network 95

Monitoring the Router Status 96

Monitoring the LAN 97

Monitoring the Wireless Network 99

Monitoring the System Performance 100

Monitoring the QuickVPN Clients 102

Appendix A: Specifications 103

Appendix B: Where to Go From Here 107

Cisco Small Business WRV210 Administration Guide 6

Introduction

This chapter provides information to familiarize you with the product features,

guide you through the installation process, and get started using the web-based

Configuration Utility.

•Product Overview, page 6

•Initial Installation, page 8

•Getting Started in the Configuration Utility, page 16

Product Overview

Thank you for choosing the Wireless-G VPN Router with RangeBooster. The

WRV210 is a VPN router with a Wireless-G access point for small offices and

home offices. The 10/100 Ethernet WAN interface connects directly to your

broadband DSL or Cable modem. For the LAN interface, there is a built-in 4-port,

full-duplex 10/100 Ethernet switch that can connect up to four devices.

Features

The wireless Access Point supports 802.11b/g and incorporates RangeBooster

technology, which utilizes a MIMO antennae configuration to provide increased

coverage and reliability over standard 802.11g.

The WRV210 has the advanced security functions needed for business

networking. It has a SPI based firewall with DoS prevention, but also a Virtual

Private Networking (VPN) engine for secure communication between mobile or

remote workers and branch offices. For your wired and wireless local area

network, there is support for multiple SSIDs and VLANs for traffic separation. The

WRV210 Wireless Access Point implements WPA2-PSK, WPA2-ENT, and WEP

encryption, along with other security features including enabling/disabling SSID

Broadcasts and MAC-based filtering.

Introduction

Product Overview

Cisco Small Business WRV210 Administration Guide 7

Wireless networking in business environments requires additional flexibility. The

WRV210 has the capability to expand or reduce the area of your wireless network.

There is support for Wireless Distribution System (WDS), which allows the

wireless coverage to be expanded without wires through wireless bridging

between it and select Cisco Small Business stand-alone access points. That,

along with the ability to increase or decrease the RF output power, allows for

optimal wireless coverage.

Front Panel

POWER—(Green) The Power LED lights up when the Router is powered on.

DMZ—(Green) The DMZ LED lights up when the Router has an available DMZ port.

If the LED is flashing, the Router is sending or receiving data over the DMZ port.

INTERNET—(Green) The Internet LED lights up when the Router is connected to

your cable or DSL modem. If the LED is flashing, the Router is sending or receiving

data over the Internet port.

WIRELESS—(Green) The Wireless LED lights up whenever there is a successful

wireless connection. If the LED is flashing, the Router is actively sending or

receiving data over the wireless network.

1-4 (ETHERNET)—(Green) These four LEDs correspond to the four Ethernet ports

of the Router. If the LED is continuously lit, the Router is connected to a device

through the corresponding port (1, 2, 3, or 4). If the LED is flashing, the Router is

actively sending or receiving data over that port.

Introduction

Initial Installation

Cisco Small Business WRV210 Administration Guide 8

Back Panel

POWER—The Power port is where you connect the AC power cable.

RESET—The Reset button has two functions.

•If pressed for one second, the Reset button causes a warm reboot—the

Router restarts without losing any of the current configuration settings.

•If pressed for approximately 15 seconds, the Reset button resets the

Router’s factory defaults.

You can also restore the factory defaults from the

Administration > Factory Defaults

screen of the Router’s Configuration Utility.

INTERNET—The Internet port connects to your cable or DSL modem.

1-4 (ETHERNET)—The four Ethernet ports connect to your PCs and other network

devices.

Initial Installation

Follow the instructions below to connect the equipment and configure the Internet

connection and wireless network.

•“Placement Options” on page 9

•Connecting the Equipment, page 9

•Verifying the Hardware Installation, page 11

•Configuring the Internet Connection, page 12

Introduction

Initial Installation

Cisco Small Business WRV210 Administration Guide 9

•Securing the Wireless Network, page 13

Placement Options

You can place the router horizontally on a desktop or mount it on the wall.

Desktop Option

For desktop placement, place the router horizontally on a surface so it sits on its

four rubber feet.

Wall Option

To mount the router on the wall, follow these steps.

STEP 1 Determine where you want to mount the router.

STEP 2 Install two screws (not supplied) 2-9/16 in. apart (approximately 6.45 cm.) Leave

about 1/8 in. (about 3 mm) of the head exposed.

STEP 3 With the back panel pointing up (if installing vertically), position the router so that

the wall-mount crisscross slots on the bottom panel line up with the two screws.

STEP 4 Place the wall-mount slots over the screws and slide the router down until the

screws fit snugly into the wall-mount slots.

Connecting the Equipment

STEP 1 Make sure that all of the network hardware is powered off, including the Router,

PCs, and cable or DSL modem.

STEP 2 Connect one end of an Ethernet network cable to one of the LAN ports (labeled 1-

4) on the back of the Router, and the other end to an Ethernet port on a PC.

193817

Wall

ount

slots

2-9/16

Introduction

Initial Installation

Cisco Small Business WRV210 Administration Guide 10

NOTE You must connect one computer with an Ethernet cable for the purpose of

the initial configuration. After you complete the initial configuration,

administrative tasks can be performed from a wireless connection.

STEP 3 Repeat the previous step to connect more PCs, a switch, or other network devices

to the Router.

STEP 4 Connect an Ethernet network cable from the cable or DSL modem to the Internet

port on the Router’s back panel.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco WLAN-Router Handbücher

Cisco

Cisco RV180 Bedienungsanleitung

Cisco

Cisco Universal Broadband Router uBR7200 Originalbetriebsanleitung

Cisco

Cisco CISCO887W-GN-A-K9 Bedienungsanleitung

Cisco

Cisco T-Mobile HIPORT+ Bedienungsanleitung

Cisco

Cisco RV340W Bedienungsanleitung

Cisco

Cisco Valet Bedienungsanleitung

Cisco

Cisco 7600 SIP 200 - SPA Interface Processor 200 Handbuch

Cisco

Cisco WRT54G2 Linksys Bedienungsanleitung

Cisco

Cisco Catalyst IR8140 Heavy Duty Series Handbuch

Cisco

Cisco BEFW11S4 Bedienungsanleitung

Cisco

Cisco Linksys E3000 Bedienungsanleitung

Cisco

Cisco Universal Broadband Router Cisco uBR10012 Bedienungsanleitung

Cisco

Cisco QuickVPN - PC Bedienungsanleitung

Cisco

Cisco Linksys E900 Bedienungsanleitung

Cisco

Cisco Linksys EA2700 Bedienungsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco 876W - Integrated Services Router Wireless Bedienungsanleitung

Cisco

Cisco SRP521W Bedienungsanleitung

Cisco

Cisco Linksys WRT54GS Bedienungsanleitung

Cisco

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security... Bedienungsanleitung

Cisco

Cisco 3230 Bedienungsanleitung

Cisco

Cisco 1812W - Integrated Services Router Wireless Bedienungsanleitung

Cisco

Cisco MERAKI mx60 Bedienungsanleitung

Cisco

Cisco UBR7246VXR Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung

Sitecom

Sitecom WLR-4000 Bedienungsanleitung