Citizen 865 Series Bedienungsanleitung

2 3

English

7. Solar-Powered Watch Handling Precautions ..................................................... 22

• Charging Precautions

• Handling of Secondary Battery

• Only Use the Specified Secondary Battery

8. Replacing the Secondary Battery ........................................................................ 24

9. Precautions ............................................................................................................. 25

10. Specifications .......................................................................................................... 32

CONTENTS

1. Features ..................................................................................................................... 4

2. Before Using ............................................................................................................. 5

3. Names of Components ............................................................................................. 6

4. Setting the Time and Date ....................................................................................... 8

• Setting the Day

• Setting the Moon Phase

• Setting the Date and Month

• Setting the Time

5. Unique Features of Solar-Powered Watches ....................................................... 16

• Insufficient Charge Warning Feature

• Overcharging Prevention Feature

• Quick Start Feature

6. General Reference for Charging Times ............................................................... 20

2. Before Using

Before using, please fully charge your watch by exposing the solar cell (watch dial) to

light while referring to section 6 entitled "General Reference for Charging Times".

Once fully charged, the watch will continue to keep the correct time for about 6 months.

In order to use this watch comfortably, try to keep the watch amply charged at all times.

There is no risk of overcharging no matter how often the watch is charged

(Overcharging Prevention Feature). It is recommended to charge the watch everyday.

1. Features

This watch is a solar-powered watch equipped with a solar cell in the watch dial that

converts light energy into electrical energy to power the watch. It is also provided with

the features described below.

1. A secondary battery is used to store electrical energy.

• This secondary battery is a clean energy battery that does not contain mercury or

any other harmful substances.

2. This watch is a multi-hand watch that displays the date, day and month using hands

of the watch.

3. It also features an additional display of the moon phase.

6 7

3. Names of Components

Date hand

Hour hand

Day

Second hand Month

Button cover

Month correction

button

Minute hand

Date

Crown

Moon phase

Month Correction Button:

In the case the month correction button is of the screw lock type, operate the month

correction after first turning the “button cover” around the outside of the button to the

left to loosen the screw. The button is unable to operate properly if the screw is not

adequately loosened. Once you have finished operating the month correction button,

turn the “button cover” to the right and tighten securely. Please note that if the button

cover is not adequately tightened, the button may be bent or it may be accidentally

depressed while wearing the watch causing the month to be changed inadvertently.

Time correction position

(correction of time and day)

Date correction position (correction

of date and moon phase)

Normal position

* The illustrations shown in this manual may differ from the actual watch you have

purchased.

8 9

4. Setting the Time and Date

When setting the time and date simultaneously, the parameters are set in the order of

day, moon phase, date and month and finally time.

Setting the Day

• Pull crown out to

second position

• Turn to the right

Setting the Moon

Phase

• Pull crown out to

first position

• Turn to right

Check the

date that has

been set

Setting the Date

• Pull crown out to

first position

• Turn to left

When date is set

from the 3rd to

the 30th Setting the Date

• Pull crown out

to first position

• Turn to left

Setting the

Month

• Press the month

correction

button

Setting the

Month

• Press the month

correction

button

Setting the Date

• Pull crown out to first

position

• Turn to left

Setting the Time

• Pull crown out

to second

position

• Turn to right

When date is set

from the 31st to

the 2nd

Temporarily

set the date to

the 30th Set the date to

today's date

Set the date to

today's date

Date

Day

Moon

phase

Month

correction

button

Correction of time and day

Correction of date and moon phase

Return the

crown to

the normal

position

[Procedure for Setting Time and Date]

Setting the Day

1. Pull the crown out to the time correction position (second position).

2. Turn the crown to the right (clockwise) and set the day to the current day.

• The displayed day begins changing at around 12:00 AM and finishes changing at

about 5:00 AM.

Setting the Moon Phase

1. Pull the crown out to the date correction

position (first position).

2. Turn the crown to the right (clockwise)

and set the current moon phase.

• The moon phase of a particular day can

be read from a newspaper and so forth.

Set the moon mark while referring to

"Reading the Moon Phase" following.

10 11

The moon phase display does not display the shape of the moon itself, but rather simply

indicates the moon phase. It can be used to provide an approximate indication of the

moon phase.

Date

Day

Moon

phase

Month

correction

button.

Time correction position (correction of time and day)

Date correction position (correction of date and moon phase)

Normal position

New moon

Moon age:0

(spring tide)

First quarter

Moon age:

approx.7

(neap tide)

Full moon

Moon age:

approx.15

(spring tide)

Last quarter

Moon age:

approx.22

(neap tide)

The moon phase can be set more accurately by setting the time during a new moon

(when the moon mark cannot be seen: moon phase: 0) or during a full moon (when the

moon mark is directly above in the 12:00 direction : moon phase: 15).

12 13

Setting the Date and Month

1. Pull the crown out to the date correction position (first position).

2. Set the date and month.

• The date hand turns to the right when the crown is turned to the left (counter-

clockwise).

• The month changes when the month correction button is pressed.

[When the Date is Set from the 3rd to the 30th]

(1) Turn the crown to the left and set the date hand to today's date.

(2) Press the month correction button and set the month to the current month.

[When the Date is Set to the 31st]

(1) Temporarily set the date to the 30th.

(2) Press the month correction button and set the month to the current month.

(3) Set the date to the correct date of the 31st.

[When the Date is Set to the 1st or 2nd]

(1) Temporarily set the date to the 30th.

(2) Press the month correction button and temporarily set the month to the previous

month.

Examples: Set the month to December when setting the month to January

Set the month to February when setting the month to March

(3) Set the date to the correct date of the 1st or 2nd.

The month changes to the current month simultaneous to the date changing from

the 31st to the 1st.

3. Return the crown to the normal position.

14 15

Setting the Time

1. Pull the crown out to the time correction position (second position) when the second

hand reaches the 0 seconds position.

2. Turn the crown to the right (clockwise) and set the time.

• The day changes immediately after about 5:00 AM. Set the time while paying

attention to AM and PM by referring to the time when the day has changed.

3. Return the crown to the normal position in synchronization with a telephone or other

time service.

[Helpful Hint for Setting the Time Accurately]

After first stopping the second hand at the 0 seconds position, advance the hour hand

and minute hand 4-5 minutes past the correct time and then turn it back in the counter-

clockwise direction to the correct time to accurately set the time.

[Notes]

• If the date is corrected when the time on the watch is between 9:00 PM and 12:00

AM, the date may not change on the following day. Avoid correcting the date

during this time.

• The calendar operates based on a 31-day month. Correct the date by turning the

crown to the to the left to set to the first day of the following month in months

with less than 31 days (months with 30 days and February).

• Avoid correcting the month when the date hand indicates a date from the 31st to

the 2nd. If you want to correct the month during this time, wait until the date

hand is outside the range of the 31st to the 2nd. Then reset the date hand to the

correct date.

• When turning the crown to the left (counter-clockwise) when correcting the time

or day, the changing of the date may change a day late during normal use.

16 17

Unique Features of Solar-Powered Watches

[Normal Time Display]

[Insufficient Charge

Warning Display] [Watch Stopped]

If insufficiently charged

When charged

If the capacity of the

secondary battery becomes

low without charging

The time is incorrect since the

watch has stopped as a result of being

insufficiently charged. Reset the

watch to the correct time. Sufficiently charge the watch by exposing to light until the watch hands begin to move.

2 seconds

The second hand changes to

2-second interval movement

2 seconds

When the watch

becomes

insufficiently

charged, the watch

display changes as

shown below.

When the watch becomes insufficiently charged, the

second hand begins 2-second interval movement to

indicate that the watch is insufficiently charged.

• Although the watch continues to run normally at this

time, the watch will stop after about 4 days have passed

since the watch has become insufficiently charged.

Charge the watch by exposing to light to return to the original 1-second interval

movement. Sufficiently charge the watch even after it has returned to 1-second

interval movement to ensure that it can be used comfortably. There is no risk of

overcharging since the watch is provided with an overcharging prevention feature.

• Although the watch will begin to run again when exposed to light after it has

stopped due to being insufficiently charged, since the time is incorrect, reset the time

after sufficiently charging the watch.

18 19

2 seconds

When the secondary battery becomes fully charged as a result of exposing the watch dial

(solar cell) to light, the overcharging prevention feature is activated automatically to

prevent the battery from being charged further. Consequently, there is no degradation in

the performance of the solar cell or secondary battery no matter how often the watch is

charged. This lets you expose the watch to light without worrying about overcharging.

The watch will stop running if it is not charged at all. The watch hands will begin to

move after about 10 seconds when the watch is exposed to light. (The time until the

hands begin to move varies depending on the model of the watch and the intensity of the

light.) However, please note that the watch may stop again since it will not be

adequately charged if the light is blocked at this time.

6. General Reference for Charging Times

The time required for charging varies according to the model of the watch (color of the

dial, etc.). The following times are shown below to serve only as a reference.

* Charging time refers to the amount of time the watch is continuously exposed to light.

Illuminance

(lux)

500

Environment

Inside an ordinary office

Charging time

4 hours 40 hours

Approx. charging

time from the

stopped state until

1-second interval

movement

Approx. charging

time from the

stopped state until

fully charged

-----

1,000 60-70 cm (24-28 in) under a

fluorescent lamp (30 W) 2 hours 18 hours -----

3,000 20 cm (8 in) under a

fluorescent lamp (30 W) 40 minutes 6 hours 120 hours

10,000 Outdoors, cloudy weather 11 minutes 2 hours 35 hours

100,000 Outdoors, summer, under

direct sunlight 3 minutes 16 minutes 12 hours

Approx. charging

time for 1 day of

operation

Full charging time: Time required for charging the watch from the stopped state to fully charged.

Charging time for 1 day of operation: Time required for charging the watch to run for 1 day at 1-second

interval movement.

20 21

[Note]

• Once fully charged, the watch will continue to run for about 6 months with any

additional charging. As shown in the table above, a considerable amount of time is

required until the watch starts running once the watch has stopped as a result of

being insufficiently charged. Try to keep your watch sufficiently charged at all

times by charging everyday.

Furthermore, it is recommended to charge your watch by exposing to direct sunlight

once a month.

Inhaltsverzeichnis

Andere Citizen Betrachten Handbücher

Citizen

Citizen F950 Bedienungsanleitung

Citizen

Citizen Calibre 8700 Series Bedienungsanleitung

Citizen

Citizen Quartz 7822 Bedienungsanleitung

Citizen

Citizen YUQ-W760-00M Bedienungsanleitung

Citizen

Citizen E270 Bedienungsanleitung

Citizen

Citizen PROXIMITY Installationsanleitung

Citizen

Citizen F158 Bedienungsanleitung

Citizen

Citizen 0S00 Bedienungsanleitung

Citizen

Citizen DOUBLE FACE JQ4 Series Bedienungsanleitung

Citizen

Citizen E76 Series Bedienungsanleitung

Citizen

Citizen JW00 Series Bedienungsanleitung

Citizen

Citizen 2502 Bedienungsanleitung

Citizen

Citizen H38 Series Bedienungsanleitung

Citizen

Citizen CAL.0S60 Bedienungsanleitung

Citizen

Citizen 0S62 Bedienungsanleitung

Citizen

Citizen CAL.0S Series Bedienungsanleitung

Citizen

Citizen C650 Bedienungsanleitung

Citizen

Citizen J304 Bedienungsanleitung

Citizen

Citizen HIGH HAND CHRONOGRAPH Series Bedienungsanleitung

Citizen

Citizen QUARTZ ECO-DRIVE EP7XXX CTZ B6815 Bedienungsanleitung

Citizen

Citizen Eco-Drive B872 Bedienungsanleitung

Citizen

Citizen AT2141-52L Bedienungsanleitung

Citizen

Citizen Eco-Drive E784 Bedienungsanleitung

Citizen

Citizen Eco-Drive Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung