Citizen C45 Bedienungsanleitung

2 3

1. Features

This is a combination watch equipped with chronograph, timer mode etc. which is

convenient for timing races.

The watch is also equipped with an EL (electro-luminescence) Light that allows

you to read the display even in the dark.

CONTENTS

1. Features .................................................................................................................. 3

2. Name of Parts ....................................................................................................... 4

3. Setting the Analog Time ................................................................................... 5

4. Switching Modes (Functions) .......................................................................... 6

5. How to Use Each of the Modes (Functions) ................................................ 7

A. Time Mode <TME> ............................................................................................ 7

B. Calendar Mode <CAL> ................................................................................... 10

C. Alarm Mode <ALM> ....................................................................................... 12

D. Chronograph Mode <CHR> ........................................................................... 14

E. Timer Mode <TMR> ........................................................................................ 18

6. EL Light ............................................................................................................... 21

7. When These Problems Occur ....................................................................... 22

8. All-Reset Function ............................................................................................ 23

9. Precautions .......................................................................................................... 24

10. Specifications ...................................................................................................... 31

English

4 5

3. Setting the Analog Time

(1) Pull out the crown and second hand stops.

(2) Turn the crown and set hands to the

correct time.

(3) Push the crown back in to restart the

watch.

☆To set the watch to the correct

time

Stop second hand at “0”. Move minute hand a

few minutes ahead of the correct time, then

move it back to the correct time. Push the

crown back synchronizing with the time tone

or time casting.

Analog and digital displays can be set to different times to use as a dual time

watch.

SELECT

SPLIT

RESET

MODE

W.R . 10bar LIGHT

START

STOP

SET

S.T.

TME

Normal position

Crown

Position for time

adjustment

2. Name of Parts

* The illustrations shown in this manual may differ from the actual watch you

have purchased.

SELECT

SPLIT

RESET

MODE

W.R . 10bar LIGHT

START

STOP

SET

S.T.

TME

Hour hand

Button (M)

Mode display

Button (B)

Second hand

Minute hand

Digital display

Crown

Button (A)

6 7

How to Use Each of the Modes (Functions)

A. Time Mode <TME>

EL Light is illuminated when button (A) is pressed (or while being pressed) in

Normal Time Mode.

(1) Press button (B) for more than 2 seconds in

Normal Time Display. “S.T., ON/OF”

flashes and summertime will be adjusted.

(2) Press button (A) to set for summertime.

Display changes to “ON” or “OF” each

time button (A) is pressed.

* “S.T.” is on display when summertime is set

“ON”. The watch shows the time one hour

added to the regular time when summertime

is released.

SELECT

SPLIT

RESET

MODE

W.R . 10bar LIGHT

START

STOP

SET

S.T.

TME

Hours Seconds

Minutes

(A)

Summertime Mark (S.T.)

[Normal Time Display]

(M)

(B)

4. Switching Modes (Functions)

In addition to the Time mode, this watch has 4 functions of Calendar, Alarm,

Chronograph and Timer.

Each press of the button (M) switches the mode. See Mode indicator to check the

present mode.

<Auto-Return>

Display will return automatically to the time mode <TME> if left in Alarm mode

for more than 2 minutes without any operation.

TME

Time Mode

ALM

Alarm Mode

CHR

Chronograph Mode

TMR

Timer Mode

CAL

Calendar Mode

(M) (M)

(M)

(M)(M)

8 9

• Summertime ON/OF is changed each time button (A) is pressed.

• Press button (A) to return to “00” seconds and start for adjustment of seconds.

• 12/24-hour display is changed each time button (A) is pressed.

(4) Press button (M) to return to the Normal Time Display.

* Be sure to set AM/PM mark correctly when using 12-hour display system.

* Auto-return to Normal Time Display will activate when the watch is left in

adjustment mode (including summertime adjustment) for approximately 2

minutes.

* If button (M) is pressed in adjustment mode, the display will immediately

return to Normal Time Display.

(1) Press button (B) for more than 2 seconds in Normal Time Display. “S.T.,

ON/OF” flashes and summertime will be adjusted.

(2) Each time button (B) is pressed in adjustment mode, flashing digits change in

order as shown below. Make flashing where adjustment is needed.

(B) : Press button (B) once

《B》

: Press button (B) for 2 seconds or more

(3) Press button (A) to adjust flashing digits. (Press and hold button (A) for rapid

advancement.)

Normal Time

Display Seconds

MinutesHours

Summertime

ON/OF

《B》(B)

(B)(B)

(B) (B)

12/24-Hour

Display

10 11

(3) Press button (A) to adjust flashing digits. (Press and hold button (A) for rapid

advancement.)

(4) Press the button (M) to return to the normal calendar display.

* Year can be set from 1996 to 2099. (displayed only at the time of

adjustment)

* Auto-return to Normal Calendar Display will activate when the watch is left

in adjustment mode for approximately 2 minutes.

* Day of the week is automatically set with adjustment of Year, Month and

Date.

* When the calendar is set to a non-existent date (e.g., February 30), the

display will automatically show the first day of the next month when

returned to the normal calendar display.

* Month-end adjustments are not necessary as Calendar is programmed to be

set automatically.

* If button (M) is pressed in adjustment mode, display will immediately return

to Normal Calendar Display.

B. Calendar Mode <CAL>

EL Light is illuminated when button (A) is pressed (or while being pressed) in

Calendar Mode.

(1) Press button (B) in Normal Calendar Display

for 2 seconds or more. “Month” display starts

flashing and adjustment can be made.

(2) Each time button (B) is pressed in adjustment

mode, flashing digits change in order as shown

below. Make flashing where adjustment is

needed.

SELECT

SPLIT

RESET

MODE

W.R . 10bar LIGHT

START

STOP

SET

S.T.

CAL

DayDate

(A)

Month

[Normal Calendar Display]

(M)

(B) Normal Calendar

Display

Date

Month

《B》

(B) (B)

(B)

Year

12 13

Press button (A) in Alarm Mode to switch the alarm between ON and OF (off).

(“ON” display: Alarm set, “OF”: Alarm released)

Alarm buzzer will sound for about 20 seconds. Press any button to stop alarm

sound.

Alarm will sound while button (A) is kept pressing in Alarm Mode.

(A)

ALM

C. Alarm Mode <ALM>

(1) Press button (B) in Alarm Display for 2

seconds or more. “Hour” starts flashing

and adjustment can be made.

(2) Each time button (B) is pressed in

adjustment mode, flashing digits change in

order as shown below.

(3) Press button (A) to set the time you want to sound the alarm. (Press and hold

button (A) for rapid advancement.)

ON/OF (Off)

Munites

Hours

[Normal Alarm Display (ON)]

(M)

(B) Normal Alarm

Display

Minutes

Hours

《B》

(B) (B)

(B)

SELECT

SPLIT

RESET

MODE

W.R . 10bar LIGHT

START

STOP

SET

ALM

(A)

Alarm ON Display Alarm OF (off) Display

[Chronograph Reset Display]

Inside paretheses are shown at the time of measurement after 60 minutes

Chronograph shows “Minutes, Seconds and

1/100 second” up to 59 minutes 59 seconds

99 and will change to “Hours, Minutes and

Seconds” after 60 minutes.

14 15

D. Chronograph Mode <CHR>

This chronograph measures up to 23 hours 59 minutes 59 seconds in units of 1/100

second. On reaching 24 hours of elapsed time, it resets to “00 minutes 00 seconds

00” and stops. It can also measure split times (intermediate elapsed time).

SELECT

SPLIT

RESET

MODE

W.R . 10bar LIGHT

START

STOP

SET

CHR

1/100 second

(second)

Seconds

(minute)

(A)

Minutes

(hour)

(M)

(B) Minute

Second

1/100

second

CHR

[Up to 59 minutes 59 seconds 99]

* If Time Mode is set to 12-hour display system, alarm time also becomes 12-

hour display system. Pay attention to AM/PM and set correctly.

* Alarm time does not change when summertime is set in Time Mode.

* Auto-return to Normal Alarm Display will activate when the watch is left in

adjustment mode for approximately 2 minutes.

* The watch automatically returns to the normal time mode when the alarm

state continues for 2 minutes when in the alarm mode.

* If button (M) is pressed in adjustment mode, display will immediately return

to Normal Alarm Display.

Hour

Minute

Second

CHR

[After 60 minutes]

16 17

Even if button (M) is pressed and the mode is switched while Chronograph is

running, the measurement will continue. When you return to the Chronograph

Mode, the measured time is again displayed. However, if Chronograph counting

has exceeded 24 hours, the watch will return to Chronograph Reset Display.

What is Split Time:

Intermediate elapsed time from the start.

Start Goal

Split Time

(1) Start/Stop can be repeated for any number of times by pressing button (A).

• EL Light will turn “ON” for 4 seconds when counting is stopped by pressing

button (A).

(2) Press button (B) when counting is stopped to reset Chronograph.

(1) Start/Stop can be repeated for any number of times by pressing button (A).

• EL Light will turn “ON” for 4 seconds when counting is stopped by pressing

button (A).

(2) Press button (B) while Chronograph is counting. Split Time will appear for 10

seconds.

• “SPLIT” will flash while Split Time is being displayed.

• EL Light will turn “ON” for 4 seconds when button (B) is pressed.

(3) Press button (B) when counting is stopped to reset Chronograph.

*1: After 10 seconds, automatically

returns to the measuring display.

RESET STOPMEASURE

(A) (A)

(B)

SPLIT TIME

18 19

(1) Press button (A). Timer starts countdown from set time.

(2) Press button (A) to stop Timer while Timer is running. Press button (A) to

restart Timer when Timer is stopped.

* The EL light will turn ON when button (B) is pressed while the timer is

running.

(3) Press button (B) while the timer is stopped to return to the initial set time.

SET TIME TIME UPRUNNING

(A)

STOP

(A)

(B)

To automatically return to the set time

E. Timer Mode <TMR>

Timer can be set up to 60 minutes in unit of one minute. Buzzer will sound for 5

seconds when countdown is up and display will return to initial set time.

Press button (B) in Timer Set Display when set

time is flashing. Set time digits decrease by

one minute, so display the time you want to

set. Press and hold button (B) for rapid

advancement.

Set time

(minutes)

Remaining time

(minutes, seconds)

[Timer Set Display]

(M)

(B)

SELECT

SPLIT

RESET

MODE

W.R . 10bar LIGHT

START

STOP

SET

TMR

(A)

20 21

6. EL Light

It is called electro-luminescence. It is a scientific phenomenon which becomes

illuminant when voltage is applied to it. This watch utilizes a luminiferous method

by making EL substance a panel.

The EL illumination comes on in the following situations.

(1) When button (A) is pressed (or kept pressing) in Normal Time Display or

Normal Calendar Display.

(2) When operating to display split time or stop in the Chronograph counting.

(3) When button (B) is pressed (or kept pressing) while Timer is running.

Even if button (M) is pressed and the mode is changed while Timer is running, the

timer countdown will continue. When you return to the Timer Mode, the

countdown time is again displayed. However, the watch will return to the initial

set time when the set time of the timer has finished counting down.

Andere Handbücher für C45

Inhaltsverzeichnis

Andere Citizen Betrachten Handbücher

Citizen

Citizen Eco-Drive B6 Series Bedienungsanleitung

Citizen

Citizen 6P21 Bedienungsanleitung

Citizen

Citizen U70 series Bedienungsanleitung

Citizen

Citizen E76 Series Bedienungsanleitung

Citizen

Citizen CB1 Series Bedienungsanleitung

Citizen

Citizen JS00 Bedienungsanleitung

Citizen

Citizen Eco-Drive J280 Bedienungsanleitung

Citizen

Citizen 0S21 Bedienungsanleitung

Citizen

Citizen 2115 Bedienungsanleitung

Citizen

Citizen Eco-Drive F150 Bedienungsanleitung

Citizen

Citizen YF10 Bedienungsanleitung

Citizen

Citizen 90S5 Bedienungsanleitung

Citizen

Citizen ATB Bedienungsanleitung

Citizen

Citizen Eco-Drive Historische JR4046-03E Bedienungsanleitung

Citizen

Citizen F335 Bedienungsanleitung

Citizen

Citizen 0S20 Bedienungsanleitung

Citizen

Citizen 6P27 Bedienungsanleitung

Citizen

Citizen CC1x Bedienungsanleitung

Citizen

Citizen Eco-Drive Proximity Bedienungsanleitung

Citizen

Citizen FS20 Bedienungsanleitung

Citizen

Citizen 3740-04 Handbuch

Citizen

Citizen C300 Bedienungsanleitung

Citizen

Citizen EW2586-58E Bedienungsanleitung

Citizen

Citizen Eco-Drive B612 Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung