Citizen C650-00A Bedienungsanleitung

KM.

Please charge the watch fully before use

by exposing it to light.

When the watch does not operate according to the

instruction manual, it is insufficiently charged.

Charge the watch for at least 3 hours approximately

20 cm (8 in) away from a fluorescent or incandescent

lamp (30 W) as a light source. When charging, do

not place the watch too close to the light source to

prevent the watch from becoming too hot.

* When charging the watch under direct sunfight,

charge for at least 50 minutes.

English

CONTENTS

1. Features .................................................................................................... 6

2. Before Using............................................................................................. 7

3. Names of Components and Major Functions........................................ 8

4. Switching the Mode (Display Functions) ............................................. 12

5. Checking 0-Position of Each Hand....................................................... 13

6. Accessing Times or Dates of Major Cities........................................... 18

7. Switching Analog Time and Digital Time............................................. 20

8. Setting the Time ..................................................................................... 22

9. Setting the Date...................................................................................... 25

10. Using the Alarm Mode ........................................................................... 28

11. Using the Chronograph ......................................................................... 32

12. Using the Timer ...................................................................................... 34

13. Using Zone Setting ................................................................................ 36

14. All-Reset.................................................................................................. 43

15. Functions Unique to Solar Powered Watches..................................... 46

• Insufficient Charge Warning Function

• Time Setting Warning Function

• Overcharging Prevention Function

• Power Save 1

• Power Save 2

• Manual Power Save

• Charge Indicator

16. General Reference for Charging Times ............................................... 59

17. Notes Regarding Handling of this Watch............................................. 60

18. Replacing The Secondary Battery........................................................ 61

19. Using the Register Ring......................................................................... 62

20. Precautions............................................................................................. 66

21. Specifications......................................................................................... 72

4 5

1. Features

This watch is a combination solar-powered watch that contains a solar cell in

its face that drives the watch hands, alarm, chronograph, timer and numerous

other functions by converting light energy into electrical energy.

It is also equipped with convenient functions including three power save

modes that reduce power consumption when light is not shining on the solar

cell, and a “charge indicator” that roughly indicates how much the secondary

battery is charged.

6 7

2. Before Using

This watch is a solar-powered watch. Before using, allow light to shine

onto the watch so that it is sufficiently charged.

If the manual power save function has been activated, cancel it before

charging. (Refer to p.58 for information on the procedure for canceling

the manual power save function.)

A secondary battery is used in this watch to store electrical energy. This

secondary battery is a clean energy battery that does not contain mercury or

other toxic substances. Once fully charged, the watch will continue to run for a

maximum of 4 years without additional charging (when in the power save 2

mode).

[Proper Use of this Watch]

To use this watch comfortably, make sure to recharge it before it stops running

completely. There is no risk of overcharging the watch no matter how often it is

recharged (Overcharging Prevention Function).

It is recommended that the watch be recharged everyday.

3. Names of Components and Major Functions

Name/Mode Time Calendar Alarm 1 Alarm 2

AMode hand TME CAL AL-1 AL-2

BHour hand Always indicates “hours”

CMinute hand Always indicates “minutes”

DSecond hand Always indicates “second“

E24 hour hand Always indicates “24-hour time” in conjunction with hours and minutes

FUTC hour hand Always indicates “UTC hours”

GUTC minute hand Always indicates “UTC minutes”

IDigital display 2

City name

Charge indicator

HDigital display 1

Hours, minutes, seconds,

A/P, SMT (when set to

daylight savings time)

Month, date, day, SMT

(when set to daylight

savings time)

Hours, minutes, A/P,

alarm (ON/OF)

Alarm 3 Chronograph Timer Zone setting

AL-3 CHR TMR SET

Always indicates “hours”

Always indicates “minutes”

Always indicates “second“

Always indicates “24-hour time” in conjunction with hours and minutes

Always indicates “UTC hours”

Always indicates “UTC minutes”

Hours, minutes, A/P,

alarm (ON/OF)

Measured time

(seconds, minutes,

1/100 seconds)

Remaining time

display (minutes,

seconds)

City name (SET/OFF)

SMT (ON/OF)

City name Measured time (hours) Set time (minutes) City name

Charge indicator

1110

Name

/Mode Time Calendar Alarm 1 Alarm 2

Crown

position

Normal

position

1st click

2nd click

Normal

position

1st click

2nd click

Normal

position

1st click

Mode switching

------

Time correction Date

correction Alarm time correction

Changing the city

------

Switching location to be corrected

Changing the city

------

Switching SMT (ON/OF)

Switching between

"seconds" correction and

"24 hour time" correction

2nd click

Alarm 3 Chronograph Timer Zone setting

Mode switching

------ Changing the city

Alarm time correction

Changing the city

------

Switching location to be corrected

Changing the city

Switching alarm (ON/OF)

0-position setting

Start/stop

------

Split, reset

------

Set time correction

Reset

City name, time

difference setting

Changing the city

Switching city name

(SET/OFF)

Switching location to

be corrected

Changing the city

Switching SMT

(ON/OF)

JCrown

Button (A)

Button (B)

------

Switching alarm (ON/OF)

4. Switching the Mode (Display Functions)

In addition to the time and date modes, this watch is also equipped with three

additional modes consisting of the alarm, chronograph and timer modes. The

mode can be switched by turning the crown. Check the current mode with the

mode hand.

5. Checking 0-Position of Each Hand

Before using this watch, check that the 0-position (base position of each hand) is

set correctly to ensure that the functions of the watch operate properly by

performing the following procedure.

12 13

TME

Time

CAL

Calendar

AL-1

Alarm 1

AL-2

Alarm 2

SET

Zone Setting

TMR

Timer

CHR

Chronograph

AL-3

Alarm 3

Mode hand

<0-Position Correction (Setting to the Watch Base Position)>

When setting the 0-position of each hand, always make sure to turn the crown

forward (clockwise) to set each hand to its 0-position in the clockwise direction.

1. Turn the crown while in the normal position to set the mode hand to the

chronograph [CHR] mode.

2. Pull the crown out to the second click (0-position correction position).

• The second hand, minute hand, hour hand, 24 hour hand, UTC hour hand

and UTC minute hand rapidly advance to the position stored in memory.

• "HR" lights during digital display 2 indicating that the watch is in the

correction state.

3. Turning the crown forward (clockwise) allows correction to be made in the

positive direction. Turning the crown continuously allows the 0-position to be

corrected continuously.

4. Pressing button (A) switches the correction location between "MIN" (minute

hand) and "SEC" (second hand) each time it is pressed.

5. Turn the crown forward (clockwise) to align each hand at the 0-position at

each correction location. Although correction can be made in the negative

direction by turning the crown backward (counter-clockwise), always make

sure to set the 0-position by turning the crown forward to ensure that the 0-

position is set correctly.

• The 24 hour hand is corrected in conjunction with the hour hand. 15

<0-Position Check>

1. Turn the crown while in the normal position

to set the mode hand to the chronograph

[CHR] mode.

2. Pull the crown out to the second click (0-

position correction position).

• The second hand, minute hand, hour

hand, 24 hour hand, UTC hour hand and

UTC minute hand rapidly advance to the

0-position (12:00 position).

Note:

• When each hand is not at the 0-position,

perform the "0-position correction"

procedure. If this 0-position is out of

alignment, each hand will not indicate the

correct position.

• The UTC hour and minute hands are corrected in conjunction with the

minute hand.

• The second hand can only be corrected in the forward (clockwise) direction

only.

6. After correcting, return the crown to the normal position.

• After correcting the 0-position of each hand, reset the time, calendar and

other modes before using the watch.

Note:

• None of the buttons on the watch operate during movement of each hand.

Operate the buttons only after the hands have stopped moving.

Hour hand/24 hour hand

Minute hand/UTC hour hand,

UTC minute hand

Second hand

<Normal Chronograph

Display>

Crowned

pulled out to

second click

Crown

returned to

normal

position

<0-position (Base Position)

Correction State>

(A)

6. Accessing Times or Dates of Major Cities

The time or date of major cities pre-registered in this watch can be easily

accessed by pressing the buttons.

1. Turn the crown to set the mode hand to the time [TME] or [CAL] calendar

mode.

2. When button (A) is pressed, the times or dates of major cities are displayed

while scrolling up each time it is pressed.

3. When button (B) is pressed, the times or dates of major cities are displayed

while scrolling down each time it is pressed.

• Pressing button (A) or (B) continuously causes the display to advance

rapidly.

18 19

Display

on watch City name

Time

difference

Daylight

savings

time

UTC

Universal time constant

±0 ---

Display

on watch City name

Time

difference

Daylight

savings

time

TYO Tokyo +9 M

LON London ±0 KSYD Sydney +10 K

PAR Paris +1 KNOU Noumea +11 M

ROM Rome +1 KAKL Auckland +12 K

CAI Cairo +2 KHNL Honolulu

10 M

IST Istanbul +2 KANC Anchorage

MOW Moscow +3 KLAX Los Angeles

KWI Kuwait +3 MDEN Denver

DXB Dubai +4 MCHI Chicago

KHI Karachi +5 MMEX Mexico City

DAC Dacca +6 MNYC New York

BKK Bangkok +7 MYUL Montreal

SIN Singapore +8 MCCS Caracas

HKG Hong Kong +8 MRIO Rio de Janeiro

PEK Beijing +8 MBUE Buenos Aires

Scrolling UP

Scrolling DOWN

* Cities (regions) in which daylight savings time is used are indicated with a K, while those in which it

is not are indicated with an M.

* The time difference and use of daylight savings time of each city are subject to change by the

particular country.

Inhaltsverzeichnis

Andere Citizen Betrachten Handbücher

Citizen

Citizen 8203 Bedienungsanleitung

Citizen

Citizen CC1x Bedienungsanleitung

Citizen

Citizen 6P27 Bedienungsanleitung

Citizen

Citizen Aqualand JV0010-08E Bedienungsanleitung

Citizen

Citizen Eco-Drive CAL 8651 Bedienungsanleitung

Citizen

Citizen 0S2A Bedienungsanleitung

Citizen

Citizen Promaster Skyhawk A-T Bedienungsanleitung

Citizen

Citizen C350 Handbuch

Citizen

Citizen Calibre 8700 BL8000-03A Bedienungsanleitung

Citizen

Citizen W770 Bedienungsanleitung

Citizen

Citizen GP00 Bedienungsanleitung

Citizen

Citizen F100 Bedienungsanleitung

Citizen

Citizen ECO-DRIVE J850 Bedienungsanleitung

Citizen

Citizen B110 Betriebsanleitung

Citizen

Citizen 0S22 Bedienungsanleitung

Citizen

Citizen CA7090-87L Bedienungsanleitung

Citizen

Citizen F900 Bedienungsanleitung

Citizen

Citizen 0S20 Bedienungsanleitung

Citizen

Citizen Eco-Drive BT0000-15A Bedienungsanleitung

Citizen

Citizen JS06 Bedienungsanleitung

Citizen

Citizen FS10 Bedienungsanleitung

Citizen

Citizen Eco-Drive AP2XXX Bedienungsanleitung

Citizen

Citizen YF20 Bedienungsanleitung

Citizen

Citizen Quartz 0580 Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung