Citizen C650 Bedienungsanleitung

Setting Instructions for Movement Caliber C650

Contents

1. FEATURES

2. BEFORE USING

3. SECIFICATIONS

4. NAME OF COMPONENTS AND MAJOR FUNCTIONS

5. SWITCHING THE MODE (DISPLAY FUNCTIONS)

6. CHECKING O-POSITION OF EACH HAND

7. ACCESSING TIMES OF DATES OF MAJOR CITIES

8. SWITCHING ANALOG TIME AND DIGITAL TIME

9. SETTING THE TIME (TIME IS CORRECTED BY DIGITAL DISPLAY)

10. SETTING THE DATE (DATE IS CORRECTED BY DIGITAL DISPLAY)

11. USING THE ALARM MODE

12. USING THE CHRONOGRAPH

13. USING THE TIMER

14. USING ZONE SETTING

15. ALL RESET

16. FUNCTIONS UNIQUE TO SOLAR-POWERED WATCHES

17. POWER CONSERVATION FEATURE

18. GENERAL REFERENCE FOR CHARGING TIMES

20. USING THE BEZEL REGISTER RING

19. NOTES REGARDING HANDLING OF THIS WATCH

21. CARE OF YOUR WATCH

(click on a topic)

This watch is a combination solar-powered watch that contains a solar cell in its face that drives the watch

hands, alarm, chronograph, timer and numerous other functions by converting light energy into electrical

energy.

It is also equipped with convenient functions including three power save modes that reduce power

consumption when light is not shining on the solar cell, and a "charge indicator" that roughly indicates how

much the secondary battery is charged.

2. BEFORE USING

This watch is a solar-powered watch. Before using, allow light to shine onto the watch so

that it is sufficiently charged.

If the manual power save function has been activated, cancel it before charging. (Refer to

p.19 for information on the procedure for canceling the manual Power-Save function.)

A rechargeable battery is used in this watch to store electrical energy. This rechargeable battery is a clean

energy battery that does not contain mercury or other toxic substances. Once fully charged, the watch will

continue to run for a maximum of 4 years without additional charging (when in the power save 2 mode). Please

note this is not a user replaceable item.

[Proper Use of this Watch]

To use this watch comfortably, make sure to recharge it before it stops running completely. There is no risk of

overcharging the watch no matter how often it is recharged (Overcharging Prevention Function).

It is recommended that the watch be recharged everyday for optimum performance.

Return to Table of Contents

1. FEATURES

3. Specifications

Movement Caliber Number C650

Accuracy Within +/- 15 seconds per month (when worn at normal temperatures of

5oC to 35oC/(41oF to 95oF)

Operating temperature range Watch operating temperature range : 0oC +55oC (32oF to 131oF)

Analog Display Time: Second, minutes, hours, 24 hours, UTC minutes,

UTC hours, mode

Time Seconds, minutes, hours, city name, daylight savings time, A/P

Calendar Month, date, day, city name

Alarm 1 Hours, Minutes, A/P, city name, ON/OFF

Alarm 2 Hours, Minutes, A/P, city name, ON/OFF

Alarm 3 Hours, Minutes, A/P, city name, ON/OFF

Chronograph Chronograph hours, chronograph minutes, chronograph seconds,

chronograph 1/100 seconds, SPL, 24 hour measurement

Timer Timer remaining minutes, timer remaining seconds, set minutes (timer

setting range: 99 minutes to 1 minutes in 1 minute units

Display

Function

Digital Display

Zone Setting City name (SET/OFF), daylight savings time (ON/OFF), display setting

and cancellation for each city, setting of ON/OFF for daylight savings

time for each city.

Additional Functions

x Switching between main time (analog) and sub-time (digital)

x Power save 1: Automatically stops second hand movement and

liquid crystal display

x Power Save 2: Automatically stops watch functions

x Manual Power Save: Enables watch functions to be stopped

arbitrarily (forcibly)

x Power indicator: Approximate indication of Eco Drive Rechargeable

battery charging level

x Insufficient charging warning function

x Time setting warning function

x Overcharging prevention function

Continuous running times Fully charged to stopped: Roughly 4 years (when Power Save 2 function is

operating)

Two –second interval movement to stopped: Roughly 1.5 days

Battery Eco Drive rechargeable Manganese Titanium battery. Not user replaceable

Return to Table of Contents

4. NAMES OF COMPONENTS AND MAJOR FUNCTIONS

Name /Mode Time Calendar Alarm 1 Alarm 2 Alarm

3Chronograph Timer Zone

Setting

(1) Mode Hand TME CAL AL-1 AL-2 AL-3 CHR TMR SET

(2) Hour Hand Always Indicates Hours

(3) Minute Hand Always Indicates Minutes

(4) Second Hand Always Indicates Seconds

(5) 24 Hour Hand Always indicates “24-Hour time” in conjunction with hour and minutes

(6) UTC hour hand Always indicates “UTC Hours”

(7) UTC minute hand Always indicates “UTC Minutes”

(8) Digital Display 1 Hours,

minutes,

seconds, A/P,

SMT(when set

to daylight

savings time

Month,

date, day,

SMT( when

set to

daylight

savings

time

Hours, minutes, A/P, alarm

(ON/OFF) Measured time

(seconds,

minutes, 1/100

seconds)

Remaining

time display

(minutes

seconds)

City name

(SET/OFF)

SMT

(ON/OFF)

City Name Measured time

(hours) Set time

(minutes) City Name(9) Digital Display 2

Charge indicator

(10) Crown Normal

Position Mode Switching

1st Click Changing

the city

2nd Click Time Correction Date

Correction Alarm Correction 0-position

adjustment Set time

correction City name,

time

difference

setting

(A) Button A

Normal

Position Changing the city Start Stop Changing

the city

1st Click Switching

City Name

(set/off)

2nd Click Switching Location to be corrected Switching

Location

to be

corrected

(B) Button B

Normal

Position Changing the city Split, reset Reset Changing

the city

1st Click Switching alarm (on/off) Switching

SMT

(on/off)

2nd Click Switching SMT

(on/off) Switching

between

“seconds”

correction and

“24 hour time”

correction

Switching alarm (on/off)

Return to Table of Contents

5. SWITCHING THE MODE (DISPLAY FUNCTIONS)

In addition to the time and date modes, this watch is also equipped with three additional modes consisting of

the alarm, chronograph and timer modes. The mode can be switched by turning the crown. Check the current

mode with the mode hand.

6. CHECKING O-POSITION OF EACH HAND

Before using this watch, check that the 0-position (based position of each hand) is set correctly to ensure that

the functions of the watch operate properly by performing the following procedure.

<O-Position Check> 1. Turn the crown while in the normal position to set

the mode hand to the chronograph [CHR) mode.

2. Pull the crown out to the second click (O-

position correction position). The second hand,

minute hand, hour hand, 24-hour hand, UTC

hour hand and UTC minute hand rapidly advance

to the 0-position (12:00 position).

Note:

When each hand is not at the 0-position, perform the

"O-position correction" procedure. If this 0-position is

out of alignment, each hand will not indicate the

correct position.

Return to Table of Contents

O-Position Correction (Setting to the Watch Base Position)

When setting the 0-position of each hand, always make sure to turn the crown forward (clock- wise) to set each

hand to its 0-position in the clockwise direction.

1. Turn the crown while in the normal position to set the mode hand to the chronograph [CHR] mode.

2. Pull the crown out to the second click (0-position correction position).

x The second hand, minute hand, hour hand, 24-hour hand, UTC hour hand and UTC minute hand

rapidly advance to the position stored in memory.

x "HR" lights during digital display 2 indicating that the watch is in the correction state.

3. Turning the crown forward (clockwise) allows correction to be made in the positive direction. Turning the

crown continuously allows the 0-position to be corrected continuously.

4. Pressing button (A) switches the correction location between "MIN" (minute hand) and "SEC" (second hand)

each time it is pressed.

5. Turn the crown forward (clockwise) to align each hand at the 0-position at each correction location. Although

correction can be made in the negative direction by turning the crown backward (counter-clockwise), always

make sure to set the 0-position by turning the crown for- ward to ensure that the 0-position is set correctly.

x The 24-hour hand is corrected in conjunction with the hour hand.

x The UTC hour and minute hands are corrected in conjunction with the minute hand. • The second

hand can only be corrected in the forward (clockwise) direction only. 6. After correcting, return the

crown to the normal position.

After correcting the 0-position of each hand, reset the time, calendar and other modes before using the watch.

Note:

None of the buttons on the watch operate during movement of each hand. Operate the buttons only after the

hands have stopped moving.

Return to Table of Contents

7. ACCESSING TIMES OR DATES OF MAJOR CITIES

The time of date of major cities pre-registered in this watch can be easily accessed by pressing the buttons.

1. Turn the crown to set the mode hand to the time [TME] or calendar [CAL] mode.

2. When button (A) is pressed, the times or dates of major cities are displayed while scrolling up

each time it is pressed.

3. When button (B) is pressed, the times or dates of major cities are displayed while scrolling

down each time it pressed.

* Pressing button (A) or (B) continuously causes the display to advance rapidly.

x Cities (regions) in which daylight savings time is used are indicated with a 0, while those in which it is

not are indicated with an X.

x The time difference and use of daylight savings time of each city are subject to change by the

particular country.

Return to Table of Contents

8. SWITCHING ANALOG TIME AND DIGITAL TIME

This watch is able to switch between analog time display and digital time display.

1. Turn the crown to set the mode hand to the time [TME) mode.

2. Press button (A) and (B) simultaneously.

3. After a confirmation tone sounds, the watch switches the time of the city displayed by analog display and

the time of the city displayed by digital display.

If buttons (A) and (B) are simultaneously pressed when in the calendar [CAL] Mode, the watch switches the

date of the city displayed by analog display and the date of the city displayed by digital display (the times are

switched at this time as well).

9. SETTING THE TIME (TIME IS CORRECTED BY DIGITAL DISPLAY)

When digital time is corrected, the second, minute, hour, 24 hour and UTC hour and minute hands of the

analog time are corrected automatically in conjunction with digital time.

1. Turn the crown and set the mode hand to the time [TME] mode.

2. Press either button (A) or button (B) to access the city to be corrected.

3. When the crown is pulled out to the second click (time setting position), the watch enters the

time correction state.

4. When button (A) is pressed, the location to be corrected changes each time it is pressed. Select the

location to be corrected. (The location that is flashing is the location that can be corrected.)

• When button (B) is pressed in the [SMT] daylight savings time correction state daylight savings time can

be set (ON) or canceled (OF).

• "Seconds" return to zero when button (B) is pressed in the "seconds" correction state.

• When the crown is turned forward (clockwise) in the "hour" or "minute" correction states, correction is

made in the positive direction. Turning the crown continuously allows "hours" or 11 minutes" to be

corrected continuously. Although correction can be made in the negative direction when the crown is

turned backward (counter-clockwise), always make sure to turn the crown forward to ensure that the time

is set correctly.

• Switching "12H/24H time" is performed by pressing button (B).

5. After corrections have been completed, return the crown to the normal position

Return to Table of Contents

10. SETTING THE DATE (DATE IS CORRECTED BY DIGITAL DISPLAY)

1. Turn the crown and set the mode hand to the calendar [CAL] mode.

2. Press either button (A) or button (B) to access the city to be corrected.

3. When the crown is pulled out to the second click (date setting position), the watch enters the

date correction state.

4. When button (A) is pressed, the location to be corrected changes each time it is pressed. Select the

location to be corrected so that it is flashing.

When the crown is turned forward (clockwise), correction is made in the positive direction. When the crown

is turned backward (counter-clockwise), correction is made in the negative direction. Turning the crown

continuously allows corrections to be made rapidly.

5. After corrections have been completed, return the crown to the normal position.

Notes:

1. When the date is set for any one city, the dates of other cities, including UTC time, are corrected

automatically.

2. The year can be set from 2000 to 2099.

3. The day is corrected automatically when the year, month and date are set.

4. Since this watch is equipped with an auto-calendar function, it is not necessary to correct the date at the

end of the month.

5. When the date has been set to a non-existent date, the watch automatically displays the lst day of the

following month when the watch is returned to the normal display.

Return to Table of Contents

11. USING THE ALARM MODE

The alarm setting procedure and other procedures for alarm use are the same for Alarm 1, 2 and 3. Only the

tone that sounds is different.

The alarm sounds for 15 seconds when the set time is reached once a day. When the alarm is sounding, it can

be turned off by pressing button (A) or (B).

1.Turn the crown and set the mode hand to either the Alarm 1, 2 or 3 [AL-1, 2 or 3] mode.

2. Press either button (A) or button (B) to access the city to be corrected.

3. When the crown is pulled out to the second click (alarm time setting position), the watch

enters the alarm correction state.

4. When button (A) is pressed, the location to be corrected changes each time it is pressed. Select the

location to be corrected so that it flashes.

x The alarm can be set (ON) or canceled (OF) by pressing button (B) when the watch is in the alarm

ON/OF correction state.

x When the crown is turned forward (clockwise) in the "hours" or "minutes" correction state, correction is

made in the positive direction. When the crown is turned backward (counter-clockwise), correction is

made in the negative direction.

x Turning the crown continuously allows corrections to be made rapidly.

5. After corrections have been completed, return the crown to the normal position.

Note:

1. When the time mode is set to the 12-hour time display, the alarm time also uses a 12-hour time display.

Pay attention to AM and PM when setting the alarm time.

Return to Table of Contents

Andere Handbücher für C650

Inhaltsverzeichnis

Andere Citizen Betrachten Handbücher

Citizen

Citizen 6P05 Bedienungsanleitung

Citizen

Citizen Corso BM8400-50A Bedienungsanleitung

Citizen

Citizen GP30 Bedienungsanleitung

Citizen

Citizen J304 Bedienungsanleitung

Citizen

Citizen YF05 Bedienungsanleitung

Citizen

Citizen F50 Bedienungsanleitung

Citizen

Citizen Promaster Sky Super Skyhawk JY0080-62E Bedienungsanleitung

Citizen

Citizen F335 Bedienungsanleitung

Citizen

Citizen JP25 Bedienungsanleitung

Citizen

Citizen 510 Handbuch

Citizen

Citizen H504 Bedienungsanleitung

Citizen

Citizen 0S90 Bedienungsanleitung

Citizen

Citizen 3740 Bedienungsanleitung

Citizen

Citizen F158 Bedienungsanleitung

Citizen

Citizen CAL.6320 Bedienungsanleitung

Citizen

Citizen FS16 Bedienungsanleitung

Citizen

Citizen Quartz windsurfing MC6XXX Bedienungsanleitung

Citizen

Citizen EO1184-81D Bedienungsanleitung

Citizen

Citizen Watch Bedienungsanleitung

Citizen

Citizen 82 Series Bedienungsanleitung

Citizen

Citizen 82S7 Bedienungsanleitung

Citizen

Citizen u680 Bedienungsanleitung

Citizen

Citizen E010 Betriebsanleitung

Citizen

Citizen F950 Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung