Citizen FS16 Bedienungsanleitung

CHRONOGRAPH FUNCTION: : Chronograph 1/1 sec. Timing up to 59 minutes 59 seconds.

A) DISPLAYS AND BUTTONS

B) READING THE WATCH

C) SETTING THE TIME

D)SETTING THE DATE

E)USING THE TIME DIFFERENT CORRECTION

F)THE TIME DIFFERENCE BETWEEN THE CITIES AND UTC TIME

G)USING THE CHRONOGRAPH

H)CHRONOGRAPH RESET(AFTER REPLACING THE BATTERY)

A) DISPLAYS AND BUTTONS

Cal. FS16/FS26 Instruction manual

Chrono 60 min.

(9H)

24 hour-hand

Second hand (home time)

FS16

1/7

B) READING THE WATCH

Chronograph

second hand

Chronograph

minute hand

Hour hand

(local time)

Second hand

Minute hand

Button A

Normal Crown Position

12 hour-hand (home time)

Button

Calendar (local time)

24 hour-hand (home time)

12 Hour-

hand(A)

12 Hour-hand (B)

Home time

12 Hour-hand (C)

Home time

when the watch hands appear in the diagram;

・home time in GMT is 13:10:35

(12 hour-hand (B) & 24 hour-hand (C) display)

・

local time in Tokyo is 10:10:35

(12 hour-hand (A) display)

Note

・

The minute and second hands are the same under

home and local time.

・

The 24 hour-hand (C) is synchronized with

12 hour-hand (B)

・

The date is synchronized with 12 hour-hand (A)

FS26

2/7

C) SETTING THE TIME

There are 2 ways to use the 12 hour-hand (B) and setting the time depends on which way to use.

Please be very careful and follow the instructions below for setting the time

for both ways (Type1 & Type2).

[ TYPE 1 ]

Using the 12 hour-hand (B) and 24 hour-hand (C) for the “home time”.

In other word,using hour hand and minute hand to see the “local time”,

while the 12 hour-hand (B) and 24 hour-hand (C) to see the “home time”.

(When you use in domestic, the 12 hour-hand (B) will be hidden under the normal hour hand.)

a) Setting the home time

1. Pull the crown out to the second position when the second hand has reached the 0 position.

2. Turn the crown to set the current time,

paying attention to the motion of 12 hour-hand (B) and 24 hour-hand (C) and minute hand.

3. Return the crown to the normal position.

Setting the 12 hour hand (B) and 24 hour hand (C) and minute hand has been now completed.

4. Pull the crown out to the first position when the second hand has reached the 0 position.

Turn the crown anticlockwise to set the current time.

☆Please also set the date together.

Please refer to the next page for more details in “the setting time”.

Hour hand is linked with calendar. Please be careful if it is in morning or

afternoon when you set the time.

5. Return the crown to the normal position.

12Hour-

hand(A)

Local time

12Hour-hand(B)

Home time

12Hour-hand(C)

Home time

Time correction position

3/7

[ TYPE 2 ]

When you use the 12 hour hand (B) and 24 hour hand (C) for the “local time”.

In other word,you can select this type when using the 12 hour hand (B) and 24

hour hand (C) to see the “second time zone”(the time which has time lag),

while the hour and minute hand and 12 hour hand (B)

(linked with 24 hour hand (C) ) to see the “dual time”.

For example, if you set the 12 hour hand (B) and 24 hour hand (C) to GMT

(Greenwich Mean Time) and the normal hour and minute hand for the “second time zone”,

you can check GMT anytime and anyplace.

a) Setting the home time

1. Pull the crown out to the second position when the second hands has reached

the 0 position.

2. Turn the crown to set the current time, paying attention to the motion of

12 hour-hand (B) and 24 hour hand (C) and minute hand.

3. Return the crown to the normal position.

Setting the 12 hour-hand (B) and 24 hour-hand (C) and minute hand has

been now completed.

4. Pull the crown out to the first position when the second hand has reached

the 0 position. Turn the crown anticlockwise to set the current time.

☆Please also set the date together .

Please refer to the next page for more details in “the setting time”.

Hour hand is linked with calendar. Please be careful if it is in morning or

afternoon when you set the time.

5. Return the crown to the normal position

4/7

D)SETTING THE DATE

1. Pull the crown out to the first position when the second hands has reached

the 0 position.

2. Turn the crown clockwise to set the date. If the date is set between the hours

of around 9:00PM and 1:00PM, the date may not change on the following date.

3. After the date has been set, push the crown back to the normal position.

E)USING THE TIME DIFFERENT CORRECTION

When moving to a country or area which is in a different timezone,the current

time in the “local time” can be corrected.

As the date calendar is linked with time,the date in the “local time” is also corrected.

12Hour

hand(A)

Date

12Hour-

hand(B)

12Hour-

hand(C)

1st position

12Hour

hand(A)

Date

12Hour-

hand(B)

12Hour-

hand(C)

1st position

5/7

1. Pull the crown out to the first position when the second hands has reached

the 0 position. Turn the crown anticlockwise to set the “second time zone”.

☆Date may gain in some countries or regions. In this case,please set the

date also when you set the time.

As for details, please refer to the page “the setting date”.

2. After the date has been set, push the crown back to the normal position.

F)THE TIME DIFFERENCE BETWEEN THE CITIES AND UTC TIME

G)USING THE CHRONOGRAPH

This chronograph is able to measure and display time from 1/1 second up to

maximum of 1 hour.

[ Measuring Time with Chronograph ]

1. The chronograph can be started and stopped each time button (A) is pressed.

2. To reset, press button (B) and the chronograph second & minute hands

return to their 0 positions.

RESET

TIME

MEASUREMENT

STOP

"A"

"B"

"A"

"B"

6/7

H)CHRONOGRAPH RESET(AFTER REPLACING THE BATTERY)

This procedure should be performed when the chronograph second hand do

not return to the 0 second position after the chronograph has been reset, and

including after the battery has been replaced.

1. Pull the crown out to the 2nd position.

2. Press button (A) to set the chronograph second hand to the 0 position.

3. The chronograph hand can be advanced rapidly by continuously pressing button (A) .

4. Once the hand has reached, reset the time and return the crown to its normal position.

* Do not return crown to normal position while chronograph second hand

return to 12:00 (ZERO) position.

Hand stops on the way when crown are returned to normal position and

these positions are recognized as 12:00 (ZERO) position.

These specifications might be changed without prior notice.

7/7

Andere Handbücher für FS16

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Citizen Betrachten Handbücher

Citizen

Citizen CTZ-6748 Bedienungsanleitung

Citizen

Citizen 8730 Bedienungsanleitung

Citizen

Citizen 0S22 Bedienungsanleitung

Citizen

Citizen GP10 Bedienungsanleitung

Citizen

Citizen 895 Series Handbuch

Citizen

Citizen Eco-Drive J280 Bedienungsanleitung

Citizen

Citizen E87 Bedienungsanleitung

Citizen

Citizen Eco-Drive CC3067-11L Bedienungsanleitung

Citizen

Citizen 0S90 Bedienungsanleitung

Citizen

Citizen Eco-Drive Bedienungsanleitung

Citizen

Citizen 6P22 Bedienungsanleitung

Citizen

Citizen 6S11 Bedienungsanleitung

Citizen

Citizen Corso BM8400-50A Bedienungsanleitung

Citizen

Citizen 6P26 Bedienungsanleitung

Citizen

Citizen E260 Bedienungsanleitung

Citizen

Citizen 6870 Handbuch

Citizen

Citizen 0S22 Bedienungsanleitung

Citizen

Citizen 6P88 Bedienungsanleitung

Citizen

Citizen Quartz 0580 Handbuch

Citizen

Citizen 8980 Handbuch

Citizen

Citizen 0S2A Bedienungsanleitung

Citizen

Citizen Eco-Drive B872 Bedienungsanleitung

Citizen

Citizen QUARTZ CTZ-B6908 Bedienungsanleitung

Citizen

Citizen Promaster Sky Super Skyhawk JY0080-62E Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung