●COUTION:During the operation, the housing becomes very hot.
●Frequent open/cut the lighting will reduce the life of the lamp.
●Never look directly into the light source, as sensitive persons may suffer an epileptic shock(especially
meat for epileptics)!
●Damages caused by non-observance are not subject to warranty.
●Keep away children and amateurs!
OPERATING DETERMINATIONS
●This device is a moving-head spot for creating decorative effects. And was designed for indoor use
only.
●This device is designed for professional use. Such as on stages, in disco, in theater.
● Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure
that the device will serve you for a long time without defects.
●Do not shake the device. Avoid brute force when installing or operating the device.
●Do not operate the device without lamp.
●Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged. Always
hold the fixture at the transport handles.
●When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be cables lying around. You own and the safety of others.
●Always fix the fixture with an appropriate safety-rope. Fix the safety-rope at the correct holes only.
●Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
● The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge
lamps may expose and emit a high ultraviolet, which may cause burms.
● The maximum ambient temperaturemust never be exceeded.
CAUTION: The lens has to be replaced when it is obviously damaged, so that its function is impaired,
dug to cracks or deep scratches.
●Operate the device only after having familiarized with its functions. Do not operation
by persons not qualified for operating the device. Most damages are the result of
unprofessional operation.
CAUTION: The lamp has to be replaced when it is damaged or deformed due to the heat!
●Please use the original packing if the device is to be transported.
●Please consider that unauthorized modifications on the device are forbidden due to
safety reasons.
●Never remove the serial barcode from the device as this would make the guarantee void.
●If this device will be operate in any way different to the one described in this manmal,the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers
like short-circuit, burns, electric shock, lamp explosion, crash.
INSTALLATION
4
