Note: If the LED does not change to solid blue, see the
Additional Information page on the back of this guide.
Notes
1. Attach the mounting bracket to the gang box.
2. Plug in the CLIQ.mini, and then slide it on to the
mounting bracket.
To Wall Mount the CLIQ.mini
• If the CLIQ.mini fails to connect see the
CLIQ.mini Installation and Setup Manual. Scan
the QR code below.
Installation and Setup Manual:
www.clarecontrols.com/mini-techguide
To connect the CLIQ.mini using PoE, you will need
access to the install Assist App, a CLIQ controller,
and the home’s Wi-Fi network.
Simple Setup Using Wired Connection
Step 1 - Connect the CLIQ.mini to the included PoE
injector using an ethernet cable.
Step 2 - Connect the PoE injector to the router with
another ethernet cable, and then connect the
included power supply to the PoE injector.
Step 3 - Download the Install Assist App for iOS and Android.
You can now use Install Assist to add smart home
devices. Refer to the Clare Controls Knowledge Base
for information on supported devices.
Note: A Fusion project will also need to be created.
Installation Option 1: PoE
(Power over Ethernet)
Thank You
CLIQ.mini smart
home control hub
Power over ethernet (PoE) injector & PoE power supply
- #2 Phillips head screwdriver
(for installing mounting bracket)
- Needle nose pliers
(for inserting micro USB plug into CLIQ.mini)
Eithernet Cable
Thank you for choosing Clare Controls. In today’s
competitive market place, we can appreciate that you
have many choices for your home automation needs.
Reset Tool
Mounting bracket and
Screws
UUID/Mac identication
labels
Included in the Box
Recommended Tools
To connect the CLIQ.mini using Wi-Fi, you will
need access to the install Assist App, a CLIQ
controller, and the home’s Wi-Fi network.
Simple Setup Using Wi-Fi Connection
Step 1 - Connect the CLIQ.mini to the included PoE injector
using an eithernet cable.
Step 2 - Download the Install Assist App.
Step 3 - Open the Wi-Fi settings on your phone and connect
to the CLIQ.mini’s network (Clare Wi-Fi XXXX)
Step 6 -
Reconnect your mobile device to your home’s Wi-Fi,
and then re-open the Install Assist App.
Step 7 -
You can now use Install Assist to add smart home
devices. Refer to the Clare Controls Knowledge Base
for information on supported devices.
Step 4 - Open the Install Assist App and tap the congure
Wi-Fi button
a. Enter the home’s Wi-Fi SSID and password - Tap Next and
follow the on-screen instructions.
b. Wait for the LED on the CLIQ.mini to turn solid blue. The
CLIQ.mini is now connected to Wi-Fi.
Note: If the LED does not change to solid blue, see the
Additional Information page on the back of this guide.
Installation Option 2: Wi-Fi
Note: A Fusion project will also need to be created.
