Clarion VMA543 Bedienungsanleitung

VMA543 and VMA743

5.8” or 7” Wide Screen Color LCD Monitor

Owner’s Manual

Installation Guide

WARNING!

The Clarion VMA543 and VMA743

monitors are only designed to be

viewed by rear-seat occupants.

Digital video products are not intended

for viewing by the driver while the

vehicle is in motion. Such use may

distract the driver or interfere with the

driver’s safe operation of the vehicle,

and thus result in serious injury or

death. Such use may also violate state

law.

Clarion disclaims any liability for any

bodily injury, including fatalities, or

property damage that may result from

any improper or unintended uses of this

product.

About Installation

Installation of mobile audio and video components requires

experience with a variety of mechanical and electrical procedures.

Although this manual provides general installation and operation

instructions, it does not show the exact installation methods for

your particular vehicle.

If you do not have the required knowledge and experience to

successfully complete the installation, we strongly recommend

consulting an authorized Clarion dealer about professional

installation options.

VMA543 and VMA743 3

Contents

About Installation ....................................................................................................... 2

1. Introduction ............................................................................................... 5

Features..................................................................................................................... 5

Precautions................................................................................................................ 5

Please note................................................................................................................ 6

2. Using the monitor ...................................................................................... 6

Front panel controls ................................................................................................... 7

Wireless headphones ................................................................................................ 8

Playing a video or game ............................................................................................ 8

Adjusting the picture .................................................................................................. 9

Turning the unit off and on ......................................................................................... 10

Switching between video sources ............................................................................. 10

Playing two videos or games at once ........................................................................ 10

Changing the video output mode .............................................................................. 10

Disabling automatic power on ................................................................................... 11

Returning adjustments to the factory settings ........................................................... 11

Using a remote control .............................................................................................. 11

Connecting a video source........................................................................................ 11

3. Care and Maintenance ............................................................................... 12

Cleaning the cabinet.................................................................................................. 12

Cleaning the LCD panel ............................................................................................ 12

Servicing the monitor................................................................................................. 12

4 VMA543 and VMA743

4. Installation and Wiring .............................................................................. 13

What is included in the box ....................................................................................... 13

Before Starting........................................................................................................... 13

Installing the monitor ................................................................................................. 14

Wiring the monitor ..................................................................................................... 16

5. Troubleshooting ........................................................................................ 19

6. Specification .............................................................................................. 20

VMA543General Specifications........ .........................................................................20

VMA543 Specifications ..............................................................................................20

VMA743General Specifications.............. ...................................................................20

VMA743 Specifications ..............................................................................................20

VMA543and VMA743 5

1. INTRODUCTION

The Clarion 5.8-inch VMA543 and 7-inch VMA743 are high-

performance video monitors designed specifically for the

mobile environment. Intended for use with other Clarion

multimedia products, they can also be integrated with many

other products as part of a complete mobile video solution.

Features

Two video inputs support simultaneous connection to both

dedicated video source units and optional audio/video compo-

nents, such as camcorders or videogames.

•The infrared remote control receiver output allows integra-

tion with select Clarion DVD unit.

•The monitors automatically switch to operate with either

NTSC or PAL video signals (NTSC is the standard North

American video format).

•The 16:9 aspect ratio screen allows DVD films to be viewed

in their original aspect ratio for the best cinematic experi-

ence.

Precautions

•Do not operate your monitor in ways other than those

described in this manual.

•Do not play a multimedia system when the car’s engine is

turned off. Doing so runs down the car’s battery.

•Do not disassemble or modify your monitor.

•Keep moisture away from the monitor. Water and humidity

may damage internal circuitry.

•Do not let the monitor become overheated.

If the temperature in the vehicle is high or the monitor has

been exposed to direct sunlight, cool the monitor (such as,

by running the air conditioning) before you turn it on.

•Keep all liquids, including beverages and cleaning fluids

away from the monitor. Liquids in the monitor can damage

the electronics and result in electrical shock or fire. If the

unit becomes wet, turn off all power and contact an autho-

rized Clarion dealer to have the monitor inspected.

•Never press on the liquid crystal display (LCD) panel. You

may damage it.

Failure to observe these precautions may damage your car,

the monitor, or the video source, and may void the warranty.

6 VMA543 and VMA743

Please note

In extremely cold weather the movement of the picture may

slow and the picture may darken. The picture will return to

normal once the temperature rises.

You may see small black or shiny dots in the liquid crystal

panel. These non-conforming pixels are normal and do not

indicate a product defect.

2. USING THE MONITOR

These monitors are components in a full audio/video system

that may include a VCR, DVD player, game player, camcorder,

or other video source unit.

Note:

If you have any questions about compatible components,

such as system controllers, source units, FM modulators, or

other audio/video products, please contact your authorized

Clarion dealer.

To operate the monitor, the vehicle ignition key switch must be

in the ACC or ON (run) position.

ACC or engine

ON position

WARNING!

To prevent the battery from going dead,

always operate this unit with the engine

running, if possible.

The video source unit (such as a DVD player) may turn on

automatically when you turn the ignition on.

VMA543and VMA743 7

Front panel controls

IR (infrared) receiver

for use with Clarion

remote control.

Accesses the display

adjustment menus.

Each time you press

this button the unit

steps to the next setting

option and displays the

current setting.

Increases, decreases or selects

adjustment settings Selects the viewing mode

Selects the

video

source

Turns power to the

monitor on and off

Transmit infrared signals to the headphones

8 VMA543 and VMA743

Wireless headphones (optional)

Power OFF ON turns the headphones power on and off.

CH.A and CH.B select the infrared channel if you have two

monitors and two video source units (Configuration 2).

Configuration 1 Configuration 2

You don’t need to select the IR channel if you have only one

one monitor or two monitors and only one video source

(Configuration 1—both monitors play the same video or

game).

Volume adjusts the audio volume.

Battery compartment requires two AAA 1.5 volt batteries (not

included)

Playing a video or game

The monitor is preset at the factory to turn on automatically

when you start your car’s ignition. The monitor remains dark

until it detects a video signal.

1. Insert the media (tape, cartridge, game or disc) into the

video source.

2. Turn on the headphones.

If this is the first time you’ve used the unit, make sure your

headphones have fresh batteries installed.

Note

Your headphones must be in view of the monitor for the

infrared transmission to work.

3. Press play on the video source.

4. When you see the picture, press WIDE to select the display

mode. Depending on the video source:

CINEMA may stretch the image to fill the entire screen.

ZOOM may bring the image slightly closer.

NORMAL displays the image at its true aspect ratio (4:3)

Video source Video source Video source

Monitor Monitor Monitor Monitor

IR CH A IR CH A IR CH A IR CH B

VMA543 and VMA743 9

WIDE stretches the image horizontally to fit the screen

(aspect ratio of 16:9).

4:3 16:9

5. Adjust the volume on your headphones.

Notes:

•

When using a DVD player as the source, make sure that the

unit’s output mode is set to “Wide” or “16:9.”This ensures

that the DVD player will generate a video signal, which can

take advantage of the monitor’s aspect ratio.

•

When using a source that generates a “normal”, 4:3 image

signal, such as a videogame or videocassette player, the

WIDE

button stretches the image to fit the screen.Some

minor image distortion may be visible.

Adjusting the picture

If the temperature is normal and the picture still doesn’t look

right, you may adjust the tint, color, brightness, and contrast.

1. Press PICTURE to display the adjustment menus.

The monitor displays the adjustment menus.

2. Press PICTURE again until you reach the option you wish to

adjust.

The monitor displays the adjustment bar:

TINT adjusts the overall color of the monitor.

COLOR adjust the way each color displays.

BRIGHT adjusts the monitor’s brightness.

CONTRAST adjusts the differences between light and dark

areas.

3. Press the plus (+) end of the picture controls button to

increase the adjustment.

Press the minus (-) end of the picture controls button to

decrease the adjustment.

10 VMA543 and VMA743

Each setting has 30 steps of adjustment range and is

preset at the factory to 15.

Once you’ve adjusted the picture, wait a moment and the

adjustment menus disappear.

Turning the unit off and on

Press POWER at any time to turn the unit off.

When you turn the vehicle’s ignition off, the monitor automati-

cally shuts off.

Switching between video sources

If your vehicle has two video sources, for example, a DVD

player and a game console, you can easily switch between

them.

1. Press SOURCE.

The monitor displays AUX1.

2. Press SOURCE again to select AUX2.

Note:

If you’re using only one video source, the screen remains

dark when you select the unavailable source.

Playing two videos or games at once

If your vehicle is equipped with two LCD monitors in the

headrests and two video source units, two different videos or

games can play at the same time.

Each monitor transmits the infrared audio signal over its own

channel, A or B. When a vehicle has two monitors, the default

is to configure the monitor in the driver’s headrest to use IR

channel A, and the monitor in the passanger’s headrest to use

IR channel B. You can change this.

1. Press PICTURE several times to locate the IR CH option.

2. Press plus (+) or minus (+) to alternate between A and B.

Note:

You don’t need to select the IR channel if your vehicle has

only one monitor or only one video source.

Changing the video output mode

1. Press PICTURE several times to locate the VIDEOSYS

option.

2. Press plus (+) or minus (+) to alternate between NTSC and

PAL.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarion Monitor Handbücher

Clarion

Clarion VMA6492 Fehlerbehebungshandbuch

Clarion

Clarion CJ-7500E Sicherheitsleitfaden

Clarion

Clarion VMA633 Bedienungsanleitung

Clarion

Clarion VMA1891 Fehlerbehebungshandbuch

Clarion

Clarion VMA8582 Reparaturanleitung

Clarion

Clarion VMA1041 Bedienungsanleitung

Clarion

Clarion VMA5096 Bedienungsanleitung

Clarion

Clarion VMA573 Bedienungsanleitung

Clarion

Clarion VMA5894 Bedienungsanleitung

Clarion

Clarion OHM643 Bedienungsanleitung

Clarion

Clarion VMA5091 Bedienungsanleitung

Clarion

Clarion CJ-763E-01 Bedienungsanleitung

Clarion

Clarion VMA6593 Bedienungsanleitung

Clarion

Clarion VMA5092 Bedienungsanleitung

Clarion

Clarion PP-4360 Bedienungsanleitung

Clarion

Clarion VMA770 Bedienungsanleitung

Clarion

Clarion OHM642 Bedienungsanleitung

Clarion

Clarion CMM-10GR Bedienungsanleitung

Clarion

Clarion VMA 5894 VMA5894 VMA5894 Kurzanleitung

Clarion

Clarion CJ-7300G Reparaturanleitung

Clarion

Clarion VMA1131 Bedienungsanleitung

Clarion

Clarion VMA633 Bedienungsanleitung

Clarion

Clarion OHM720 Bedienungsanleitung

Clarion

Clarion CJ-5600E Reparaturanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung