Clarke 16LBP Bedienungsanleitung

USER INSTRUCTIONS

ORIGINAL INSTRUCTIONS GC0219 ISS2

16/20LTR BACK PACK HAND PUMP

SPRAYERS

MODELS:16LBP/20LBP

PART NO: 3402272 & 3402277

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Sprayer, designed only for use with

insecticides or other water-based products.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

GENERAL SAFETY PRECAUTIONS

1. Never use this sprayer to store or spray flammable solvent-based

chemicals.

2. Empty the contents if the sprayer is not to be used for long periods.

3. If insecticide is being sprayed, always wear a protective mask, safety

glasses, footwear, overalls and gloves to protect the skin and face. Never

spray chemical products facing into the wind.

4. Never spray pesticide towards other people, animals or foodstuffs.

5. Never use the sprayer for handling hot liquids and avoid operating in

excessively hot environments.

6. Always comply with any applicable insecticide manufacturers safety

instructions/directives before use.

7. Stop using the sprayer if the container or hose is found to be damaged.

8. Always ensure all hose and lance connections are tight and leak-free.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

The sprayer is supplied with an accessories pack containing the following

items. The numbers in brackets refer to the diagram/list on pages 6 & 7Any

deficiencies should be reported to your Clarke dealer..

1. Push the lance into the trigger

assembly and secure with the

screw cap containing the collet

and O-ring.

2. Attach one of the nozzles to the

other end of the lance and

secure with the screw cap.

3. The shoulder straps can be

adjusted for length using the

buckles, so as to position the

sprayer comfortably on the operators back, ensuring they are not twisted.

OPERATION

1. Unscrew the container filler cap

and ensure the filter is in place.

2. Fill the container with the required

liquid up to the desired

graduation on the end and

replace the filler cap.

3. Pump the operating arm a few

times to pressurise the container

until the pump action stiffens.

2 x Connecting collets (46) 1 x Handle securing clip (17)

3 x Spray nozzles (Twin headed (53),

Conical (54) and Flat Fan (55)

1 x Complete set of O-rings

• 3 x to fit nozzles (53/54/55)

• 2 x to fit lance (47)

• 2 x to fit spray gun body (34)

• 1 x thin/1 x thick to fit trigger

valve piston (35/36)

1 x Piston cup seal (4)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

4. Squeeze the trigger of the spray

gun to start spraying.

5. If spraying continuously, squeeze

the trigger and engage the

trigger lock by sliding it back with

your thumb.

6. Pump the operating arm when

necessary to maintain pressure.

• The sprayer will require regular

re-pressurising approx every

0.3-0.5L to maintain the optimum output pressure.

7. Secure the operating arm in its retaining clip when not in use. Likewise

attach the lance to the clip on the operating arm.

MAINTENANCE

AFTER USE

After use, the sprayer should be flushed thoroughly with clean water to avoid

the possibility of blockages from product residue, or any cross-contamination

between different products.

After extensive use, unscrew the

trigger body and remove and clean

the filter inside the trigger assembly.

If not used for long periods or used

continuously for several days, add a

light smear of vaseline to the sealing

washers and moving parts to reduce

wear and assist free movement.

REPLACING THE PISTON CUP SEAL

In order to lubricate or replace the

piston cup seal with the spare item

supplied, the pump assembly can be

removed as follows:

1. Remove the split pin and release

the retaining clip from the

operating rod.

2. Withdraw the operating rod from

the top of the pump assembly.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

3. Unscrew the retaining ring and withdraw the pump from the container.

• The pump will lift out of the container, complete with felt seal and

rubber o-ring.

4. Draw the piston out of the cylinder

to expose the cup seal.

5. Prise the cup seal off the piston

and fit the replacement, making

sure to smear a layer of vaseline

before re-assembly.

6. Re-assemble the components in

reverse order.

FAULTFINDING

Symptom Cause Remedy

Poor delivery and

leaking lance.

Loose connections or

damaged connecting col-

lets/o-rings.

Inspect condition of

connecting collets and o-

rings & replace if necessary.

Operating handle

stiff/hard to move.

Filter screen or spray head is

blocked.

Clean out the filter screen

and spray head.

After pumping the

unit to pressurize

the chamber,

pressure is quickly

lost as soon as the

pump is operated.

The piston, sealing ball or

sealing ring may be

damaged or out of position.

Dismantle unit and refit

loose or damaged parts.

After pumping the

unit to pressurize

the chamber, the

lever rises slowly

when released.

The chamber valve is not

seating correctly due to

wear or foreign material

present.

Clean or replace the valve.

Handle is hard to

operate and

sprayer only

discharges air

without water.

The hose in the air chamber

may have come off.

Remove end nut and drain

out any water. Insert suction

hose tightly into the plastic

tube and apply waterproof

adhesive to the joint.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

COMPONENT PARTS

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

COMPONENT PARTS

No Description No Description

1 Fixing clamp 29 Spray gun handle

2 Handle securing clip 30 Trigger lock

3 Air chamber 31 Pivot pin

4Pistoncupseal 32Filter

5 Ball 33 Sealing washer

6 O-ring 20.5 x 2.5 34 Spray gun body

7 Locking nut 35 O-ring

8 Operating handle 36 O-ring

9 Split pin 37 Trigger valve piston

10 Collet 38 Spring

11 O-ring 39 Screw cap

12 Air chamber lid 40 Trigger

13 Felt ring 41 Shoulder pad

14 Pump cylinder gasket 42 Shoulder strap

15 Pump cylinder 43 Straight tube

16 Container 44 Strap sleeve

17 Handle securing clip 45 Strap hook

18 Locking wedges 46 Collet

19 Base 47 O-ring

20 Buckle 48 Nozzle body

21 Filter screen 49 O-ring

22 Sealing ring 50 O-ring

23 Container lid 51 O-ring

24 Vent plug 52 Nozzle cap

25 Flexible hose 53 Twin headed nozzle

26 Locking cap 54 Conical style nozzle

27 Collar 55 Fan style nozzle

28 Internal bush 56 Lance Assembly (complete)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Spritzpistole Handbücher

Clarke

Clarke CAS45 Installations- und Betriebshandbuch

Clarke

Clarke AP8GF Bedienungsanleitung

Clarke

Clarke APK900 Installations- und Betriebshandbuch

Clarke

Clarke AP17 Bedienungsanleitung

Clarke

Clarke CPP2B Bedienungsanleitung

Clarke

Clarke CEPG1 Bedienungsanleitung

Clarke

Clarke PHS8B Bedienungsanleitung

Clarke

Clarke APK900 Bedienungsanleitung

Clarke

Clarke 12LST Bedienungsanleitung

Clarke

Clarke PS1 Installations- und Betriebshandbuch

Clarke

Clarke CAS110 Installations- und Betriebshandbuch

Clarke

Clarke SP18C Bedienungsanleitung

Clarke

Clarke CHHSB1 Installations- und Betriebshandbuch

Clarke

Clarke 8LS Bedienungsanleitung

Clarke

Clarke CAS110 Bedienungsanleitung

Clarke

Clarke AIR CTG8 Installations- und Betriebshandbuch

Clarke

Clarke CTG8 Installations- und Betriebshandbuch

Clarke

Clarke PRO12C Bedienungsanleitung

Clarke

Clarke KIT300B Bedienungsanleitung

Clarke

Clarke Air AP15 Bedienungsanleitung

Clarke

Clarke GRIZZLY Bedienungsanleitung

Clarke

Clarke AP14GF Bedienungsanleitung

Clarke

Clarke CAB3B Bedienungsanleitung

Clarke

Clarke AP8GFM Bedienungsanleitung

Beliebte Spritzpistole Handbücher anderer Marken

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Bedienungsanleitung

Binks

Binks SV100 Bedienungsanleitung

Fimco

Fimco LG-4-3-1 Bedienungsanleitung

AG SPRAY

AG SPRAY FS-ATV-25BL Bedienungsanleitung

Nordson

Nordson MicroMax 2 Bedienungsanleitung

Bonide

Bonide 051 Bedienungsanleitung

zogics

zogics Z-DAS Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-KBS-165 Bedienungsanleitung

Matrix

Matrix SG 650 Bedienungsanleitung

Anest Iwata

Anest Iwata SGA-3 Kurzanleitung

paasche

paasche VV Datenblatt

Carlisle

Carlisle DeVilbiss JGA-510 Bedienungsanleitung

Gardena

Gardena 11120 Bedienungsanleitung

wiwa

wiwa 14025 R/F Bedienungsanleitung

Graco

Graco EM 390 Bedienungsanleitung

DeVilbiss

DeVilbiss LUNA2i Bedienungsanleitung

Graco

Graco HydroShield WMBH00 Stücklistenhandbuch

WAGNER

WAGNER W 125 Bedienungsanleitung