4
SAFETY PRECAUTIONS
• NEVER look directly at the sun or any other source of bright light,
doing so could damage the unit and may lead to permanent
damage to your eyes.
BEFORE USE
BATTERY INSTALLATION
1. To open the battery door, turn
the battery door lock (2) towards
the OPEN position.
2. Insert 3 x AA batteries (not
supplied) making sure the polarity
of the batteries matches that
shown in the battery door.
3. Close the battery door and lock
it by turning the battery door lock
to the LOCK position.
USAGE
TURNING ON/OFF THE NIGHT SCOPE
1. After installing the batteries, press
once the On/Off/Mode button
(1). The night scope will turn on.
The LED will light up in the Infra-red
window and the screen inside the
eyepiece (4) will light up.
2. When turning off the night scope,
press and hold down on the On/
Off/Mode button for 2 seconds.
ATTENTION
Do not block the Infra-red window and objective lens when looking through
the night scope.
When batteries run low, causing abnormal performance, exchange fresh
batteries immediately.
