-7- -8-
2. The radio will beep to indicate the olume changing.
3. Press and release the
[
s
]
or
[
t
]
buttons, the
olume will increase and decrease one
increment at a time until the required olume
is reached.
Key Tones
1. The Key tones (press any key, except the
[PTT]
button) on the radio
are at a fixed le el and are not affected by changing the radios
olume (i.e. key tone must be set at olume le el 4).
2. The
[PTT]
button does not ha e a key tone.
3. If the speaker is enabled, there will be no key tone for
[
s
] and [
t
]
keys.
Channel Selection
1. From the normal operating mode, press
[MENU]
button once to
enter the channel selection menu. The CHAN
indicator will begin to flash and the radios
current channel will be displayed.
2. Use the
[
s
]
or
[
t
]
buttons to select a new
channel (1-8) while the CHAN indicator is
flashing.
3. The radio will return to the normal operating mode after 10 seconds
or when the
[PTT]
button is pressed or the
[MENU]
button is pressed
se eral times.
Changing Call Ring-tone
1. From the normal operating mode, press
[MENU]
button twice to
enter the Call-Ring selection menu. The CALL
indicator will appear and the current Call-Ring
number will be displayed (1-5).
2. Use the
[
s
]
or
[
t
]
buttons to select a new Call-
Ring tone. The new tone can be heard as the
selection is changed.
3. The radio will return to the normal operating mode after 10 seconds
or when the
[PTT]
button is pressed or the
[MENU]
button is pressed
se eral times.
Sending Messages (Call-Ring tone)
1. If
[
s
]
&
[PTT]
buttons are pressed at the same time, the radio will
send out the selected Call-Ring tone with
microphone muted.
2. The Call-Ring tone indicator will be displayed
continuously when transmitting.
3. The Call-Ring tone can be hear d at the radios speaker, at olume
le el 4.
Setting VOX function
1. From the normal operating mode, press
[MENU]
button three times
to enter the VOX selection menu. The VOX
indicator will be displayed showing the current
VOX sensiti ity le el (0-2).
2. Use the
[
s
]
or
[
t
]
buttons to change the VOX
sensiti ity le el.
3. The radio will return to the normal operating mode after 10 seconds
or when the
[PTT]
button is pressed or the
[MENU]
button is pressed
se eral times.
Setting the Roger Beep tone
The Roger Beep is a tone which is automatically transmitted whene er
the
[PTT]
button is released. This tone alerts the recei ing party that the
transmission has been terminated intentionally.
To enable the Roger Beep tone:
1. From the normal operating mode, press
[MENU]
button four times
to enter the Roger Beep selection menu. The
display will indicate the current le el (ON or
OFF).
2. Press the
[
s
]
button to select ON or press
[
t
]
button to select OFF as desired.
3. The radio will return to the normal operating
mode after 10 seconds or when the
[PTT]
button is pressed, or the
[MENU]
button is
pressed se eral times.
When Roger Beep tone is enabled, the tone Icon
[
Ú
]
will be displayed.
-7- -8-
2. The radio will beep to indicate the olume changing.
3. Press and release the
[
s
]
or
[
t
]
buttons, the
olume will increase and decrease one
increment at a time until the required olume
is reached.
Key Tones
1. The Key tones (press any key, except the
[PTT]
button) on the radio
are at a fixed le el and are not affected by changing the radios
olume (i.e. key tone must be set at olume le el 4).
2. The
[PTT]
button does not ha e a key tone.
3. If the speaker is enabled, there will be no key tone for
[
s
] and [
t
]
keys.
Channel Selection
1. From the normal operating mode, press
[MENU]
button once to
enter the channel selection menu. The CHAN
indicator will begin to flash and the radios
current channel will be displayed.
2. Use the
[
s
]
or
[
t
]
buttons to select a new
channel (1-8) while the CHAN indicator is
flashing.
3. The radio will return to the normal operating mode after 10 seconds
or when the
[PTT]
button is pressed or the
[MENU]
button is pressed
se eral times.
Changing Call Ring-tone
1. From the normal operating mode, press
[MENU]
button twice to
enter the Call-Ring selection menu. The CALL
indicator will appear and the current Call-Ring
number will be displayed (1-5).
2. Use the
[
s
]
or
[
t
]
buttons to select a new Call-
Ring tone. The new tone can be heard as the
selection is changed.
3. The radio will return to the normal operating mode after 10 seconds
or when the
[PTT]
button is pressed or the
[MENU]
button is pressed
se eral times.
Sending Messages (Call-Ring tone)
1. If
[
s
]
&
[PTT]
buttons are pressed at the same time, the radio will
send out the selected Call-Ring tone with
microphone muted.
2. The Call-Ring tone indicator will be displayed
continuously when transmitting.
3. The Call-Ring tone can be hear d at the radios speaker, at olume
le el 4.
Setting VOX function
1. From the normal operating mode, press
[MENU]
button three times
to enter the VOX selection menu. The VOX
indicator will be displayed showing the current
VOX sensiti ity le el (0-2).
2. Use the
[
s
]
or
[
t
]
buttons to change the VOX
sensiti ity le el.
3. The radio will return to the normal operating mode after 10 seconds
or when the
[PTT]
button is pressed or the
[MENU]
button is pressed
se eral times.
Setting the Roger Beep tone
The Roger Beep is a tone which is automatically transmitted whene er
the
[PTT]
button is released. This tone alerts the recei ing party that the
transmission has been terminated intentionally.
To enable the Roger Beep tone:
1. From the normal operating mode, press
[MENU]
button four times
to enter the Roger Beep selection menu. The
display will indicate the current le el (ON or
OFF).
2. Press the
[
s
]
button to select ON or press
[
t
]
button to select OFF as desired.
3. The radio will return to the normal operating
mode after 10 seconds or when the
[PTT]
button is pressed, or the
[MENU]
button is
pressed se eral times.
When Roger Beep tone is enabled, the tone Icon
[
Ú
]
will be displayed.
