Clary-Icon ONESCREEN1 Bedienungsanleitung
Multi Touch Screen/ Interactive Flat
Panel Display
User Manual
TL18.201401202
Please kinly keep this manual for future inquiries.
This manual is used as the LCD all in one tpuch TV manual, the actual product may be slightly different with description.
2
Content
Matters Needing Attention................................................................................................................. 3
Installing Requirement........................................................................................................................ 5
Carrying capacity.........................................................................................................................5
Abstract heat............................................................................................................................... 5
Summary............................................................................................................................................. 6
Characteristics............................................................................................................................. 6
Basic Operation................................................................................................................................... 7
Turn on........................................................................................................................................ 7
Turn off........................................................................................................................................ 7
Introduction of OSD.............................................................................................................................. 8
How To Choose Analog Channel ..................................................................................................8
How To Choose Application ........................................................................................................ 8
Introduction Of “Set ....................................................................................................................9
How To Use TV...................................................................................................................................12
Network Setting........................................................................................................................ 13
Wired Network Setup............................................................................................................... 13
Wireless Network Setup ......................................................................................................... 14
Network Status Lookup.............................................................................................................15
Remote Control................................................................................................................................. 16
Control Panel..................................................................................................................................... 18
Switchover Among Three Signals......................................................................................................20
Full Touch...........................................................................................................................................21
Specification Of PC Mode（VGA Input）.........................................................................................22
Supporting Format Of USB................................................................................................................22
Maintaining Guide.............................................................................................................................23
FCC .................................................................................................................................................23
3
Safety Considerations
warning
Do not place containers with liquid on or near this product.
Use only dry cloth to clean.
Do not block any ventilation holes.
Install this product according to manufacturer’s User Manual.
A distance of at least 16cm must be kept from this product and other objects and/or walls.
Do not install this product near heat sources.
This product must be connected to a power point which is appropriately earthed.
Use the earthed power plug supplied by with this product.
Keep the power cord tangle free.
Use a properly functioning power point at all times.
Disconnect the power plug during storm or if you intend not to use for a long period of time.
The device is a heavy product and when moving use appropriate equipment to avoid injury.
Use qualified technicians to mount the device on the wall and/or mobile trolley. Abide by
manufacturers’ mounting instructions.
Use only qualified technicians for all repairs.
Antenna must be kept away from power cord.
The external antenna must be connected to earth to prevent potential damage caused by
voltage surge or ESD(Electro Static Discharge)
Follow instructions when inserting batteries into the remote control unit. Discard all
batteries appropriately.
Do not use mixed batteries (old and new, carbon-zinc and alkaline).
4
Installing Requirement
Carrying capacity
Better use the wall mount brackets supplied together with the product, if not, please
make sure the carrying capacity is not less than 4 times the actual load weight and make sure
the machine can be placed on it stably.
Be sure the mounting surface is not less than 4 times the actual load weight. If the
mounting surface is the building wall or roof, the surface must be solid brick, concrete or
something have equivalent strength. If the mounting surface is loose material (such as brick
wall on old houses, wood etc.) ,metal, non-metal structure, or the decoration layer is too
thick on surface, which strength is obviously insufficient, please take corresponding
measures to strengthen , support it , eliminate security risks exists.
Abstract heat
Requirement
Distancebetween the machine and mounting surface（cm）
Standard Power
Leftside&rightside
Topside
Bottom
Backside
Over 100W
10
20
20
10
Note: If the machine inlay in the wall, or in the box, in addition to meet the above requirements,
the vent area of the bottom, side, top required not less than 50% of the sealing area, keep the air
circulation.
Graphic
：
5
*Ref to the standard of CAS 132-2006
Summary
The interactive tablet is the interactive products based on independent R&D, and a multi-functional
teaching equipment set the interactive teaching, multimedia presentation, digital speech, touch
operation, handwriting input as a whole. From design to production, we give full consideration to the
application characteristics of the field of education. Convenient operation, full digital intelligent
control, we can use fingers or non-transparent objects on the screen to write, modify or delete ,which
is an perfect tool for the modern education.
Characteristics ：
Tailored for teaching and meeting system.
High brightness, high contrast screen, clear view under bright sunlight or indoor and
outdoor environment .
When we need in low brightness display mode , press on key can enter the power saving
mode, which reduce the backlight brightness to save energy and protect the
environmental .
Using the advanced infrared array scanning induction technology , HID free drive, we
can use the machine once connect.
The graphics processing of the software are all based on vector graphics, which has the
6
characteristics of high compression, distortion etc..
variety of selection on pen type,line width,color .
Powerful screen editing function, support real-time editing.
A variety of background selection, support user-defined background, has the image
insertion function for any graphics or picture , .
Intelligent identification function of geometric graphics, has various kinds of graphics
identification, high recognition rate, and can identify several pen at same time .
Simulation function of brush cause the font looks vigorous .
Support to save the file we wrote as the PDF, JPEG, GIF, PNG, TIFF, BMP and other
formats.
Simulated operation of mouse.
Supports dual touch, multi finger touch.
User management module realizes the function of adding or delete user, switching user,
customizing the user information and etc, which drives the software setting much
match to a user's habits
Support for other application software.
Support the identification on English, numbers, special characters .
Basic Operation
Turn on
Use 100～240V 50/60Hz alternating current as the power supply of the machine。
Open the baot-shape swith in the middle of the bottm on the machine (near the
power interface side) to connect power supply. (the status on indicator window is
red light)
We can press the "power" button on the machine panel or the "standby" button
on the remote control to tunrn on the machine (the status on indicator window is
green light), if the built-in OPS does not start-up, press the "SET" button on the
machine panel to open the computer power supply (this function just support all
in on touch model).
Turn off
If you want to turn off machine temporarily , please press the “power” button.
We can shut down the computer by press "SET" button on the panel under the
stauts of the ops computer working . (this function just support all in on touch
model)
If you want to shut down the machine completely, please press the baot-shape
7
swith in the middle of the bottm on the machine (near the power interface side)
or unplug the power plug.
If the machine has built-in PC, please shut down PC first, and then cut off the
power.
Turn on the machine by the power switch, we can see Android characters shows on
the right bottom of screen display , which means the Android system is starting
and please do not cut off the power supply at this time, only can we cut off the
power supply after the Android system finish booting loading.
Introduction of OSD
Operation Of OSD How To Choose Analog Channel
1.Three ways as follows to choose the channel:
1.1 Press “Source” to choose
1.2 Press “▲（Source）”as follows to choose
8
1.3 Press “Source”on the front panel or remote control to choose.
2. It will showed as follows after choosing the “Source”
3. When “Source”showed as above, there are three ways to enter
it：
3.1 Directly click.
3.2 Select "source" and then automatically enter it.
3.3 Press “▲▼”to select the signal channel wanted and then press
"OK" to confirm.
4. Also can enter it by the Full Touch Menu. Please refer to the details
at the introduction of Full Touch Menu.
How To Choose Application
1.1 Press any applications as follows to choose:
Introduction Of “Set”
1. Menu of the image setting will show up through the following three ways:
1.1 Enter from "Menu" which is at the bottom of the screen;
9
1.2 Enter from the "Menu" on the remote control .
1.3 Enter from the "Menu" on the front panel .
2. Operate on “Set” through the following two ways:
2.1 Directly click on the icon to choose.
2.2 Press "▲▼" to select. (content of “Set”: Picture, Sound, Tuner, Adjust,Function)
*Picture
1.1 Directly click on the icon to choose.
1.2 Press“ ▲▼”to select. Press " ◄► " to confirm the submenu and adjust the value. Press " ◄► "
to move to the wanted submenu(purple color lights means be selected)
*Sound
10
1.1 Directly click on the icon to choose.
1.2 Press“ ▲▼”to select. Press " ◄► " to confirm the submenu and adjust the value. Press " ◄► "
to move to the wanted submenu(purple color lights means be selected)
*Tuner
1.1 Press “Adjust”to select the submenu.
1.2 Press“ ▲▼”to select. Press " ◄► " to confirm the submenu and adjust the value. Press " ◄► " to
move to the wanted submenu(purple color lights means be selected).Press" ►" to choose ATV
Auto Search and DTV Auto Scan.
1.3 Press “Enter” to start automatic search. If you need to interrupt, please press "stop" to return to
the previous menu.
*Adjust
Inhaltsverzeichnis
