8
English
Troubleshooting
1. Switch off theinverter straight away if there is aproblem.
2. Disconnect theload appliance.
3. Inspect theload appliance and all connections.
Low or no output voltage
• The inverter has abad connection to thebattery, check all
theconnections.
• Check that thefuse has not blown (only applies to 150 W and 300 W
models). On the600 W and 1000 W models thefuse is mounted on
thecircuit board and must only be replaced by qualified electricians.
• Measuring with thewrong instrument, see Measuring AC voltage.
The red LED (1) illuminates
• The battery is too low, recharge thebattery.
• The inverter is overloaded, reduce theload.
• The inverter has become too warm. Move it to acooler place, check that
theair vents are not blocked. There should be at least 50 cm around
theinverter to ensure cooling.
• The inverter is defective, ring our customer service department.
Responsible disposal
This symbol indicates that this product should not be disposed
of with general household waste. This applies throughout
theentire EU. In order to prevent any harm to theenvironment
or health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that thematerial
can be disposed of in aresponsible manner. When recycling
your product, take it to your local collection facility or contact
theplace of purchase. They will ensure that theproduct is
disposed of in anenvironmentally sound manner.
