Clas Ohlson LP-311 Bedienungsanleitung

SUOMINORSKSVENSKAENGLISH













ENGLISH





Please read the entire instruction manual before using and save it for

future use. We apologise for any text or photo errors and any changes

of technical data.

If you have any questions concerning technical problems please con-

tact our Customer Service Department (see address on reverse.)



ENGLISH



• Internal PCI modem, V.92

• Speed up to 56 Kbps

• Supports ITU V.92/V.90 56 K protocol

• Plug and Play

• Supported by Win98SE, ME, XP and Win 2000



• NB! When a PCI-card is installed, it is very important that the

computer is turned off.

• Computer components are very sensitive to static electricity;

preferably use an anti-static bracelet when you mount the PCI-card;

if you don't have such a bracelet, you can do as follows: Drain your

charge by holding the computer chassis shortly before and during

the time you handle the PCI-card.

1. Turn off the computer and all connected units; unplug the

computer’s power cord plug.

2. Open up the computer cabinet so the mother board becomes

accessible.

3. Mount the modem in a free PCI-slot; don’t push too hard when

mounting the card, otherwise you might damage the mother board.

4. Securethecardwithascreworotherformoftting.(When

correctly mounted, the PCI-card shall be pushed down equally far

along the full length of the slot).

5. Assemble the computer cabinet (make certain no cables are jammed).

6. Start the computer and install the device drivers.

NB! Close Antivirus programs and other active programs that are

not needed for the installation.



ENGLISH



1. Start the computer when the modem is mounted.

2. Put the CD with device drivers in the CD-player.

3. Windowswillautomaticallyndthemodemandstarttheinstallation

guide.

4. Click Cancel.

5. After that, the device drivers must be installed: Open the

supplemented CD in Windows Explorer and double click Modem

Driver.

6. The installation will now be completely automatic!

3A. Manual installation using Win 98SE

Start the computer when the modem is mounted.

1. The Guide: New hardware detected is started. Click Cancel and put

the CD with device drivers in the CD-player.

2. Open Windows Explorer and double click the supplemented CD:

X:\Modem Driver (X corresponds to the device letter for your CD-

player).

3. Double click Driver and then Win98SE.

4. The installation will now be automatic in several steps.

5. Restart the computer when installation is completed.

6. The modem will be displayed as “PCI SoftV.92 Modem” under

Modem in Control Panel when it is installed and ready.



ENGLISH

Telephone

Telephone jack

3B. Manual installation using Win XP

The installation may also be done manually:

1. Install the device driver: Open the supplemented CD in Windows

Explorer and click X:\Driver (X corresponds to the device letter for

your CD-player).

2. Double click the desired device driver: Win2k_XP for Windows XP

and 2000, Win98SE or WinME.

3. Double click HXFSetup.exe.

4. Check that the modem is correctly installed in the following manner:

Open Control Panel and click Phone and Modem, make certain

that “PCISoftV.92 Modem” is in the list, click Properties to display

additional information.



Connect the supplemented cable to a telephone jack with the telephone

plug, or loosen the plug and use the modular contact.

Connect the free end of the cable to ”LINE” on the modem.

All you need to do now is create a remote connection, to be able to

call your Internet supplier.

It can be done in different ways; check the documents you have

received from your Internet supplier.



ENGLISH



Always start with the simplest action:

1. Have you put the telephone plug in the telephone jack?

2. Have you connected the cable in a correct manner to ”LINE” on the

modem?

3. Does the telephone work? Connect the telephone; do you have a

dialling tone?

4. Have you entered the correct username and password? (username

does not have to be your name or mail address)

5. Do you perhaps need to dial an extra digit to pass the telephone

switchboard?

6. You may try to switch places; put the modem in a different

expansion slot, if nothing else helps.

7. Go to Control Panel/System/Hardware/Device Manager and right

click on Modem; choose Properties, where information about the

function of the modem is found under different tabs.

8. Sometimes a reboot can work miracles in correcting errors!



SVENSKA





Läs igenom hela bruksanvisningen före användning och spara den

sedan för framtida bruk. Vi reserverar oss för ev. text- och bildfel samt

ändringar av tekniska data.

Vid tekniska problem eller andra frågor kan

Du kontakta oss (se adresserna på baksidan).



SVENSKA



• Internt PCI modem, V.92

• Hastighet upp till 56 Kbps

• Stöder ITU V.92/V.90 56 K protocol

• Plug and Play

• Stöds av Win98SE, ME, XP och Win 2000



• Obs! När ett PCI kort skall installeras är det mycket viktigt att

datorn är avstängd.

• Datorkomponenter är mycket känsliga för statisk elektricitet, använd

helst antistatarmband när du monterar PCI-kortet, om du inte har

ett sådant kan du göra så här: Avled din egen laddning genom att

hålla i datorchassiet strax innan, och under tiden som du hanterar

PCI-kortet.

1. Stäng av datorn och alla anslutna enheter, dra ur stickproppen till

datorn.

2. Dela datorlådan så att moderkortet blir åtkomligt.

3. Montera modemet i en ledig PCI-plats, tryck inte för hårt när kortet

monteras moderkortet kan ta skada.

4. Fixera kortet med skruv eller annan typ av låsning. (PCI-kortet

ska vara intryckt lika långt längs hela kontaktraden när det är rätt

monterat).

5. Skruva ihop datorlådan (se till att inga kablar kommer i kläm).

6. Starta datorn och installera drivrutinerna.

Obs! Stäng av Antivirusprogram och andra aktiva program, som

inte behövs för installationen.

SVENSKA



1. Starta datorn när modemet är monterat.

2. Sätt in cd-skivan med drivrutinerna i cd-läsaren.

3. Windows hittar modemet automatiskt och startar installationsguiden

4. Klicka på [Avbryt].

5. Efter det måste drivrutinen installeras: Öppna den bifogade

cd-skivan i Utforskaren och dubbelklicka på Modem Driver.

6. Nu kommer installationen att ske helt automatiskt!

Inhaltsverzeichnis

Sprachen:

Andere Clas Ohlson Modem Handbücher

Clas Ohlson

Clas Ohlson LP-633 Bedienungsanleitung

Clas Ohlson

Clas Ohlson LP-430 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GN-WB32L-RH Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung