5
English
b) Do not use thepower tool if theswitch does not turn it on and off. Any
power tool that cannot be controlled with theswitch is dangerous and must
be repaired.
c) Disconnect theplug from thepower source and/or thebaery pack from
thepower tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce therisk of
starting thepower tool accidentally.
d) Store idle power tools out of thereach of children and do not allow
persons unfamiliar with thepower tool or these instructions to operate
thepower tool. Power tools are dangerous in thehands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect thepower tool’s
operation. If damaged, have thepower tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cuing tools sharp and clean. Properly maintained cuing tools with
sharp cuing edges are less likely to bind and are easier to control.
g) Use thepower tool, accessories and tool bits etc. in accordance with these
instructions, taking into account theworking conditions and thework to
be performed. Use of thepower tool for operations different from those
intended could result in ahazardous situation.
5) Battery tool use and care
a) Recharge only with thecharger specified by themanufacturer. Acharger
that is suitable for one type of baery pack may create arisk of fire when
used with another baery pack.
b) Use power tools only with specifically designated baery packs. Use of any
other baery packs may create arisk of injury and fire.
c) When baery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects, that
can make aconnection from one terminal to another. Shorting thebaery
terminals together may cause burns or afire.
d) Under abusive conditions, liquid may be ejected from thebaery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from thebaery may
cause irritation or burns.
6) Service
a) Have your power tool serviced by aqualified repair person using only identical
replacement parts. This will ensure that thesafety of thepower tool is
maintained.
