8
English
Operation
Basic functions
1. Set the power switch (38) on the back of the stereo to ON and set the function
selector (10) to DVD.
2. Open the CD/DVD compartment
3. Place a disc into the compartment.
4. Close the cover. Playback starts automatically.
5. Use the navigation buttons to navigate the display. Press PLAY/PAUSE
to restart playback (DVD).
• Adjust the volume using the volume control. N.B. It is not possible to adjust the
volume using the remote control.
• TFT ON/OFF
Press TFT ON/OFF on the remote control or use the switch on the back of the
device to turn the TFT screen on/off.
• Press BACKWARD or FORWARD to go forward or backward a section (DVD)
or track (CD).
• Fast forward or rewind by pressing and holding FORWARD or BACKWARD
on the device or hold down (3) or (4) on the remote control. The DVD has these
advance/reverse speeds available: x2, x4, x8, x20, normal. Press PLAY/PAUSE
to restart playback.
• PLAY/PAUSE – During playback press PLAY/PAUSE to pause. Press again
to continue playback.
• STEP – Press STEP to pause playback. Press again to advance a frame.
To return to normal playback press PLAY/PAUSE.
• STOP - Press STOP to stop playback. When you wish to resume playback press
PLAY/PAUSE. Playback will resume from the same point where STOP was
pushed. To deactivate the resume funtion press STOP again or open the CD/
DVD compartment.
• SLOW-MOTION (DVD) – Press and hold ZOOM/SLOW on the remote control
during playback. The video will then be played at ½ normal speed. Continuing
to press the button will result in increased slow motion until 1/7 normal speed.
Press PLAY/PAUSE to resume normal playback.
• REPEAT – Press REPEAT during playback. For DVDs it is possible to repeat
sections, a title or the entire DVD. For CDs, single tracks or all tracks can be
repeated. It is even possible to repeat a marked section between two points
(A and B). Press REPEAT the required number of times to find the desired
repeat setting.
• SEARCH – Searches after a section.
1. Press SEARCH during playback and highlight the selection for playback
(title, section, or playback time) using the navigation buttons.
2. Select the desired number/playback time by using the numerical keys.
3. Press OK (PLAY/PAUSE) to confirm. Playback from the selected section starts.
4. To exit the search menu, press SEARCH again.
