9
English
• Settings
- Language: Select alanguage: English or Chinese.
- Date and time: Setting thetime format (12h/24h) plus thedate and time.
- Temperature unit: Select thetemperature unit: °Cor °F.
- HI-LO alert: Activates awarning on thescreen when thetemperature is
outside theset limits.
- HI: Setting theupper limit.
- LO: Setting thelower limit.
Activate thewarnings by selecting On and deactivate them by selecting Off.
- Temperature scale: Adjust thetemperature scale of theinfrared image by
setting thegain:
- Low gain for measurements between 150 and 550°C.
- High gain for measurements between −15 and 150°C (standard).
- Display brightness: Adjust thedisplay brightness. Choose between
"Low", "Medium" and "High".
- Auto power off: Select whether thecamera should switch off automatically
after aperiod of inactivity. Choose between 5minutes, 10 minutes, 30 minutes
and Off.
- USB mode: Select theUSB mode:
- USB disk: ...for scrolling through and analysing saved images on aPC.
- USB camera: ...for viewing thecamera's display in real time on aPC.
- Measurements: To obtain amore accurate temperature reading, set:
- Emissivity: ...emission factor ε, see thesection A brief explanation of
thermography.
- Ambient temp: ...theambient temperature.
- Distance: ...thedistance to theobject.
- System settings:
- Device info: Displays thecamera's model code, software version and
details of thememory card's total capacity and remaining space.
- Factory reset: Resets thecamera to thefactory settings. Select "Yes"
to confirm thereset.
- Format SD card: Format thememory card to remove all thedata
previously saved on it. Select "Yes" to confirm formatting.
- Auto save: Select whether images should be saved on thememory
card automatically without confirmation. "Save" will appear after
theshutter button is pressed if this function is not selected. Select [OK ]
to save or [ ] to cancel.
