Classe Audio CDT-300 - V2.0 Bedienungsanleitung
Owner's Manual
CDT-300
DVD Transport
ENGLISH FRANÇAIS
Manuel du propriétaire
CDT-300
Platine de lecture DVD
2
NOTICE
All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all
Classé components have been officially approved for the European Community (CE) mark.
This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. The CE mark certifies
that your purchase meets or exceeds all European Community requirements for unit-to-unit consistency and consumer safety.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and the receiver;
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to
operate the equipment.
This product incorporates copyright protection technology that is protected by U.S. patents ad other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
The information contained in the manual is subject to change without notice. The most current version of this manual will be posted on
our web site at http://www.classeaudio.com.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Marking by the “CE” symbol (shown left) indicates compliance of this device with the EMC
(Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the European
Community.
Classé products are designed to comply with international directives on the Restriction of Hazardous
Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and
Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the
products must be appropriately recycled or processed in accordance with these directives.
Please record the serial number for your new Classé component here for future reference.
Serial #: __________________
ENGLISH
3
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as
vases, are placed on the apparatus.
16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from
the AC receptacle.
17. The mains plug of the power supply cord shall remain readily operable.
18. Do not expose batteries to excessive heat such as sunshine, fire or the like.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of uninsulated “dangerous voltage “ within the product’s enclosure that may be of suf-
ficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of im-
portant operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture .
ENGLISH
4
ENGLISH
Contents
Welcome to the Classé family ..........................................................................6
a word about installation .......................................................................... 6
Unpacking and Placement ...............................................................................7
unpacking your unit ................................................................................. 7
placement ................................................................................................ 7
ventilation ................................................................................................ 7
custom installations .................................................................................. 7
serial number ........................................................................................... 8
register your purchase! ............................................................................. 8
operating voltage ...................................................................................... 8
warm up/break-in period .......................................................................... 9
please read this manual… ........................................................................ 9
Special Design Features .................................................................................10
flexible GUI ........................................................................................... 10
highly refined circuit design ................................................................... 10
extensive listening tests .......................................................................... 10
extraordinary longevity .......................................................................... 10
Front Panel .....................................................................................................11
Rear Panel .....................................................................................................13
coaxial digital output ....................................................................... 14
AES/EBU digital output .................................................................... 14
optical digital output ........................................................................ 14
The Remote Control .......................................................................................18
Using the CDT-300 ........................................................................................22
CD operational menu ............................................................................. 22
playlist ............................................................................................. 22
controls menu .................................................................................. 23
repeat mode .................................................................................... 23
shuffle .............................................................................................. 23
time display ..................................................................................... 23
program ........................................................................................... 23
DVD operational menu .......................................................................... 24
the home screen .............................................................................. 24
controls ........................................................................................... 24
5
ENGLISH
The Menu System ..........................................................................................25
main menu system ................................................................................. 25
system setup .................................................................................... 25
teach IR ........................................................................................... 26
display setup .................................................................................... 26
triggers ............................................................................................. 26
remote Fkeys ................................................................................... 27
cautionary note on Fkey use ............................................................ 27
status ............................................................................................... 28
version info ...................................................................................... 28
sensors ............................................................................................. 28
display setup menu ................................................................................ 29
brightness ........................................................................................ 29
timeout ............................................................................................ 29
language .......................................................................................... 30
temporary display ............................................................................ 30
volume display ................................................................................ 30
System Setup .................................................................................................31
the system setup menu system ................................................................ 31
audio setup ............................................................................................ 31
audio delay ...................................................................................... 32
digital output ................................................................................... 32
video setup ............................................................................................ 33
video standard ................................................................................. 33
aspect ratio ...................................................................................... 34
resolution ........................................................................................ 34
edge enhancement .......................................................................... 35
color space ...................................................................................... 35
preference .............................................................................................. 35
audio format .................................................................................... 35
audio language ................................................................................ 35
subtitle language .............................................................................. 35
CD autoplay .................................................................................... 35
navigation ........................................................................................ 36
parental control ...................................................................................... 36
Updating Your Unit ........................................................................................37
Troubleshooting .............................................................................................38
Care & Maintenance ......................................................................................40
Specifications ................................................................................................41
Dimensions ...................................................................................................82
6
ENGLISH
Welcome to the Classé family
Congratulations on your purchase of a Classé product. It is the result of many
years of continuous refinement, and we are sure that you will enjoy it for many
years to come.
We value our relationship with our customers. Please allow us to stay in touch with
you by registering your warranty on the Classé website (www.classeaudio.com) or
by returning your warranty card now, before you pack up the shipping carton
of your new product and forget all about it. Doing so will enable us to let you
know about any possible future upgrades or updates that might become available
for your Classé component.
Registering your warranty also means that warranty service can be obtained
easily and quickly, even if you have mislaid your original sales slip.
You will find the warranty registration card at the end of the separate warranty
policy booklet, enclosed.
Please, take a few minutes to register your product on-line or
fill out the warranty registration card, and drop it in the mail.
a word about installation Every effort has been made to make the Classé CDT-300 simple and
straightforward to install and use.
Still, we have no way to evaluate other variables such as the size and shape
of your room, its acoustics, and the associated equipment you have chosen
to use with your DVD transport. All of these factors influence the ultimate
performance of your system.
For this reason, we strongly encourage you to have your
system installed and calibrated by your dealer, whose
experience, training, and specialized equipment can make a
profound difference in the final performance of the system.
7
ENGLISH
Unpacking and Placement
unpacking your unit Carefully unpack your DVD transport according to the supplied instructions,
and remove all accessories from the carton.
Important! Keep all packing materials for future transport of your Classé
product. Shipping your new component in anything other
than its purpose-designed packing material may result in
damage that is not covered by the warranty.
placement The CDT-300 has been designed to operate optimally on any stable and level
surface. Incorporating vibration damping within the CDT-300’s feet and CD/DVD
Drive Assembly, a high level of isolation from external disturbances is incorporated.
As with any digital component, it is best to place the CDT-300 somewhat
apart from your most sensitive analog electronics, particularly turntables and
preamplifiers. Generally, placing it on its own shelf should suffice.
Note that adequate clearance for the AC cord and connecting cables
must be left behind the CDT-300. We suggest leaving eight inches
(20 cm) of free space behind your DVD transport to allow all cables
sufficient room to bend without crimping or undue strain.
Classé recommends that the unit not be placed directly on the top surface of a
power amplifier (or any other heat source).
ventilation Your Classé DVD transport generates a certain amount of heat in the course
of normal operation. Be sure to allow three inches (75mm) of clearance above
it and three inches (75mm) to each side to allow heat dissipation through air
circulation. Avoid placement on soft surfaces that would restrict airflow (such as
plush carpeting).
custom installations Drawings are included in this manual to facilitate special installations and
custom cabinetry (see the section Dimensions). An optional, purpose-designed
rack mount kit is available for this product. Contact your Classé dealer for more
information.
8
ENGLISH
serial number The serial number for your DVD transport is found on the rear of the unit.
Please note and record this number on the page entitled Important Safety
Instructions for your future reference.
register your purchase! Having found the serial number, now would be a good time to register your
product on the Classé web site or fill out the registration card. Please register
your purchase so we can advise you of updates and other items of interest.
It will take only a minute or so. Please register your product on line or complete
the card now, before you forget.
operating voltage The CDT-300 disc transport is set at the factory (internally) for 100V, 120V,
230V, or 240V AC mains operation, as appropriate for the country in which it
is to be sold. (230V only in European Union countries, in compliance with CE
regulations.) The voltage setting may not be changed by the user.
Make sure that the label on the rear panel of your DVD transport indicates
the correct AC operating voltage for your location. Attempting to operate your
DVD transport at an incorrect voltage may damage the unit.
Warning: The voltage setting of your DVD transport may not be
changed by the user. There are no user-serviceable parts
within the unit. Please refer any problems to an authorized
Classé service center.
If the AC mains voltage indicated on your DVD transport is incorrect, please
contact your local authorized Classé dealer or distributor.
The CDT-300 includes protection circuitry that will prevent the transport from
operating at dangerously high or low voltages.
• At startup: the AC mains voltage must be within a range of approximately
-15% to +10% of its nominal value at startup, or the transport will not
turn on. For example, a 120V unit requires the AC mains to be between
approximately 95V–135V in order to turn on.
• Overvoltage during operation: if the AC mains voltage surges by roughly
10% or more during operation, the transport will enter protection mode
and shut down. The standby LED (Light-Emitting Diode) will flash to
indicate the protection mode has been engaged. An error message will be
displayed on the LCD touchscreen.
• Under-voltage during operation: if the AC mains voltage sags by 15%
or more, the transport will continue to play (since this does not present
a particular danger to the transport), but note that it may not be able
to achieve its usual standard of performance under these compromised
conditions. The Standby LED will flash to indicate the condition.
9
ENGLISH
warm up/break-in period Your new Classé DVD transport will deliver outstanding performance
immediately. However, you should expect to hear it improve somewhat as
it reaches its normal operating temperatures and its various components
“break-in.” It has been our experience that the greatest changes occur within the
first 300 hours, as the transport reaches thermal equilibrium and the capacitors
fully form. After this initial break-in period, the performance of your new
product should remain quite consistent for years to come.
The only exception to this rule is if the unit is placed in standby or unplugged
for an extended period of time, allowing it to cool down. Depending on the
degree of cooling involved, you should expect a brief warm-up period before
the its sound quality is at its best. Unless your DVD transport was allowed
to become quite chilled, subsequent thermal re-stabilization should not take
long. Fortunately, you should never have to repeat the initial 300 hour break-in
period.
please read this manual… Please take a few minutes to review this manual, and to familiarize yourself
with your new DVD transport. We understand that you are anxious to plug
everything in and get started. However, reading this manual and following the
advice it gives will ensure that you get all the benefits you deserve from having
purchased such a fine piece of equipment.
10
ENGLISH
Special Design Features
flexible GUI The LCD touchscreen on the front panel of your new component supports an
extremely flexible and versatile graphical user interface (GUI) while maintaining
a clean, uncluttered appearance. The CDT-300 provides a range of controls
that might otherwise require dozens of buttons and knobs on the front panel.
Despite this power and flexibility, it remains simple to operate in day-to-day use.
highly refined
circuit design Classé products are designed to deliver consistent, state-of-the-art performance
over many years of use. With this in mind, our engineers have developed
electronic circuitry that offers both exceptional performance and stability in
equal measure.
Starting with innovative circuit designs, we engineer them to optimum levels
by applying meticulous attention to detail at all phases of the design and
component selection process. By measuring, listening and viewing in an
interactive manner we conclude whether our design goals have been met.
Finally, our designs are subjected to extensive testing to ensure longevity,
reliability, and stability.
extensive listening tests Throughout the development phase, perhaps the most important testing of
all is listening and viewing our work. Subjective listening is highly valued at
Classé, as striking a balance between products that both measure exceptionally
and sound fabulous is our aim. We take the same approach with video, wherein
sophisticated video measuring equipment is used in conjunction with subjective
viewing.
extraordinary longevity Another benefit of having worked with highly refined circuit designs so
extensively over many years is that we have vast experience in what works well
over the long term.
By using only the highest quality parts to begin with, and then using them in an
informed way as a result of both accelerated aging experiments and actual long-
term experience, we are able to design and manufacture products which we are
confident will stand the test of time.
We are confident that your new Classé DVD transport will give you many
years of trouble-free reliability and musical enjoyment, just as previous Classé
products have given their owners.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere Classe Audio DVD-Player Handbücher
Classe Audio
Classe Audio CD-DVD-1 Bedienungsanleitung
Classe Audio
Classe Audio CD-DVD-1 Bedienungsanleitung
Classe Audio
Classe Audio CDT-300 - V1.9 Bedienungsanleitung
Classe Audio
Classe Audio CDP-300 Bedienungsanleitung
Classe Audio
Classe Audio CDP-300 - V2.2 Bedienungsanleitung
Classe Audio
Classe Audio CDP-300 - V2.9 Bedienungsanleitung
