OPERATION & MAINTINENCE INSTRUCTIONS
CAP18
Pass Thru Air Lock Cleanroom Entry System
10
Warranty Information
Clean Air Products Corporation warrants that it will repair FOB its factory or furnish without
charge FOB its factory a similar part to replace any material in its equipment within one
year after the date of sale if proved to the satisfaction of the company to have been
defective at the time it was sold provided that all parts claimed defective shall be returned,
properly identified to the company at its factory, freight charges prepaid. Factory installed
equipment of accessories is warranted only to the extent guaranteed by the original
equipment manufacturer, and this warranty shall not apply to any portion of the equipment
modified by the user. Claims under this warranty should be directed to Clean Air Products,
8605 Wyoming Avenue North, Brooklyn Park, MN 55445, setting forth in detail the nature of
the defect, the date of the initial installation, and the serial number and model number of
the equipment.
HEPA filters are warranted to have their given efficiency at the time of shipping
Parts shipped to replace warranty items shall be invoiced out with 60 day terms. Credit shall
be issued when defective parts are returned to Clean Air Products’ factory. (Contaminated
materials shall be credited after receipt of proper disposal is sent to Clean Air Products.)
When special shipping containers are used to ship out new product, defective parts are to
be returned in the same container. This shall be so stated on the Bill of Lading sent with the
replacement parts.
Contaminated Parts and Equipment
Clean Air Products must be notified if defective parts, or other materials supplied to the
purchaser are contaminated with hazardous chemicals or carcinogenic materials that are
considered hazardous or carcinogenic by the EPA or other regulatory agencies. These parts
are not to be shipped back to Clean Air Products’ factory. The purchaser shall be responsible
for proper disposal and all costs associated with the disposal and/or storage of the defective
contaminated equipment. Prior to their disposal, Clean Air Products may require inspection
of said defective materials.
The user and purchaser shall each be responsible and be back charged for cleanup and
disposal of all contaminated materials shipped back to Clean Air Products’ factory.
