Clear-Com BP410 Bedienungsanleitung

Quick Reference Guide

BP410

1. Battery

2. Increase Volume button (▲)

3. Decrease Volume button (▼)

4. PWR (Power) button

5. Headset cable connector

6. Battery-release latch

7. Power/Mode lights

8. Channel A (Intercom 1) button - Includes 2-wire and

4-wire connections

9. ISO (Isolate) button - To All Wireless Headsets and

Beltpacks, Base, ISO Relay and AUX OUT

(if activated)

10. Channel B (Intercom 2) button - Includes 2-wire

and 4-wire connections

The Beltpack Beltpack Setup

7 78 9 10

21 64 3 5

Part Number: 399G214 Rev A

Date: 12/5/16

Clear-Com, the Clear-Com logo and Clear-Com Concert are trademarks or registered trademarks of HM Electronics, Inc.

Battery RELEASE BATTERY button

Belt clip

Headset

cable plug

¾Insert a fully charged battery in each Beltpack with the

metal contacts inserted rst. Slide it in until it snaps.

NOTE: The battery will not slide in if inserted

incorrectly. Excessive force should not be necessary.

¾Plug the Beltpack’s headset cable connector into each

Beltpack.

BP410 Beltpack Settings

To Set: All functions are from an off state. Press the Power button and release with the

appropriate buttons below.

ISO restrict On A button

ISO restrict Off A button and ISO buttons

Handsfree On selected button(s) A button and/or B button and/or ISO and Volume up button (▲)

Handsfree Off selected button(s) A button and/or B button and/or ISO and Volume down button (▼)

Listen-Only mode On Volume down button (▼)

Listen-Only mode Off Volume up button (▲)

To Set: With the power already on...

Increase mic gain (15 steps) Press the B button while repeatedly pressing the Volume up button (▲)

Decrease mic gain (15 steps) Press the B button while repeatedly pressing the Volume down button (▼)

Increase sidetone level (5 steps) Press the A button while repeatedly pressing the Volume up button (▲)

Decrease sidetone level (5 steps) Press the A button while repeatedly pressing the Volume down button (▼)

¾Make certain the Beltpack is turned Off.

¾Press REG button on base station.

– STATUS display on the base station shows “o” for registration mode.

¾On the Beltpack, press and hold ISO while pressing POWER and then release all buttons.

– The power lights blink red, then green and then turn off. One power light remains green.

– The registration number will appear on the base station STATUS display.

AUTO NULL Adjustment (only if using 2-wire interface)

If echo is heard in wireless Beltpacks on A or B:

¾Use pointed object (e.g. pen) to press and hold the A or B AUTO NULL button for 2 seconds.

CAUTION: Before pressing an AUTO NULL button, be certain there are no open microphones on the wired

system. Notify wired system users that a loud noise may occur in their headsets during the auto null adjustment.

The system may be out of operation for approximately 50 seconds during this adjustment.

Local Headset Communication

¾SEL button selects communication with A, Bor ISO.

– A, Bor ISO lights indicate selection.

¾TALK button

– Press and release quickly to “latch on” for open communication.

– Press and hold while talking for momentary communication – release when nished.

¾VOLUME control adjusts the audio level in local headset ear piece.

¾MIC LEVEL control adjusts the audio level going out from local headset microphone.

Power Switch

STATUS AUTO NULLREG

Beltpack

Registration

Audio Channel and

Auto-Null Controls

Local Headset

Controls

The DX410 Console

Technical Support

In The Americas and Asia – Tel: +1.510.337.6600 or 1.800.462.4357 Menu option 1 • Hours: 8:00am-5:00pm Pacic Time • Web: www.clearcom.com

In Europe, Middle East and Africa – Tel: +44.1223.815000 • Hours: 8:00am-5:00pm GMT • Email: [email protected]

General Use

Beltpack Sidetone Adjustment:

¾Press and hold the A button while you repeatedly press up (▲) to increase or press down (▼) to decrease

audio levels.

Changing the battery:

¾When a Beltpack battery becomes weak, a headset voice prompt will say “Change battery.”

¾Press the RELEASE BATTERY button on the belt clip of the pouch, and use your thumb to slide the battery

from the belt-pac.

¾When charging the battery using the AC50 Battery Charger, the charging time is about 2.5 hours.

Inhaltsverzeichnis

Andere Clear-Com Gegensprechanlage Handbücher

Clear-Com

Clear-Com RS-601 Bedienungsanleitung

Clear-Com

Clear-Com FreeSpeak II Bedienungsanleitung

Clear-Com

Clear-Com HME DX410 Bedienungsanleitung

Clear-Com

Clear-Com Eclipse HX series Bedienungsanleitung

Clear-Com

Clear-Com Tempest 2400 MasterBelt Bedienungsanleitung

Clear-Com

Clear-Com RM-220 Fehlerbehebungshandbuch

Clear-Com

Clear-Com Eclipse Median Bedienungsanleitung

Clear-Com

Clear-Com KB-702GM Bedienungsanleitung

Clear-Com

Clear-Com Eclipse ICS 1016E Bedienungsanleitung

Clear-Com

Clear-Com Tempest 900 Bedienungsanleitung

Clear-Com

Clear-Com HelixNet Anleitung zur Verwendung

Clear-Com

Clear-Com TEMPEST 2400 Bedienungsanleitung

Clear-Com

Clear-Com FreeSpeak Edge Bedienungsanleitung

Clear-Com

Clear-Com CS-100 Fehlerbehebungshandbuch

Clear-Com

Clear-Com WBS-680 Bedienungsanleitung

Clear-Com

Clear-Com Matrix Plus 3 Bedienungsanleitung

Clear-Com

Clear-Com ECLIPSE ICS 92/52 Bedienungsanleitung

Clear-Com

Clear-Com FreeSpeak II Integra Bedienungsanleitung

Clear-Com

Clear-Com LQ series Bedienungsanleitung

Clear-Com

Clear-Com MS-222 Bedienungsanleitung

Clear-Com

Clear-Com Eclipse HX-Median Bedienungsanleitung

Clear-Com

Clear-Com HME DX210 Bedienungsanleitung

Clear-Com

Clear-Com HelixNet Partyline Bedienungsanleitung

Clear-Com

Clear-Com ENCORE EF-701M Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung