Clear-Com HelixNet 2.1 Bedienungsanleitung

2.1

IKB-12P Industrial KB Station

User Guide

Document Reference PN: 399G167 Rev: 1 1/13/16

Clear-Com HelixNet Industrial KB Station User Guide

HelixNet Industrial KB Station User Guide

Part Number: 399G111 Revision: A

Legal Disclaimers

Clear-Com, the Clear-Com logo, and HelixNet are registered trademarks of HM Electronics, Inc.

The software described in this document is furnished under a license agreement and may be

used only in accordance with the terms of the agreement.

The product described in this document is distributed under licenses restricting its use, copying,

distribution, and decompilation/reverse engineering. No part of this document may be

reproduced in any form by any means without prior written authorization of Clear-Com, an HME

Company.

This product is covered by U.S. Patent Nos. 8,311,085 and 8,553,865 and by European Patent

No. 2 176 987 B1.

Clear-Com Offices are located in California, USA; Cambridge, UK; Dubai, UAE; Montreal,

Canada; and Beijing, China. Specific addresses and contact information can be found on Clear-

Com’s corporate website:

www.clearcom.com

Clear-Com Contacts

Americas and Asia-Pacific Headquarters

California, United States

Tel: +1.510.337.6600

Email: CustomerServicesUS@clearcom.com

Europe, Middle East, and Africa Headquarters

Cambridge, United Kingdom

Tel: +44 1223 815000

Email: SalesSupportEMEA@clearcom.com

Canada Office

Quebec , Canada

Tel: +1 (450) 653-9669

China Office

Beijing Representative Office

Beijing, P.R.China

Tel: +8610 65811360 / 65815577

Contents

HelixNet Industrial KB Station User Guide

1Important safety instructions........................................................................5

1.1 Safety symbols ................................................................................................6

1.2 Further information ..........................................................................................6

2Introduction....................................................................................................7

3Panels and Interfaces....................................................................................8

3.1 Industrial KB Station front panel.......................................................................8

3.2 Industrial KB Station rear panel .....................................................................10

3.3 KB Station handset........................................................................................12

4Installing the Industrial KB Station.............................................................13

4.1 System overview............................................................................................13

4.2 Mounting the Industrial KB Station.................................................................14

4.3 Connecting the Industrial KB Station..............................................................14

4.4 Installing the Industrial KB Station .................................................................14

4.5 Adding extra call buttons to the Industrial KB Station.....................................15

5Configuring the Industrial KB Station........................................................17

5.1 Using the menus............................................................................................17

5.2 Configuration settings....................................................................................18

5.3 Configuring the Audio settings.......................................................................18

5.4 Station Settings .............................................................................................21

5.5 Profiles ..........................................................................................................22

5.6 Networking.....................................................................................................22

5.7 Administration................................................................................................24

5.8 Diagnostics....................................................................................................25

6Using the Industrial KB Station ..................................................................26

6.1 Using the handset (HS-6) ..............................................................................26

7Using the Configuration Editor...................................................................27

7.1 Introduction....................................................................................................27

7.2 Accessing the Configuration Editor................................................................28

7.3 User Stations screen .....................................................................................28

7.4 Station Details screen....................................................................................29

7.5 Profiles screen...............................................................................................30

7.6 Profile Editing screen.....................................................................................31

7.7 Change Password screen..............................................................................33

HelixNet Industrial KB Station User Guide

8Specifications ..............................................................................................34

8.1 Industrial KB Station (IKB-12P)......................................................................34

9Menu maps...................................................................................................36

10 Compliance..................................................................................................40

HelixNet Industrial KB Station User Guide

1 Important safety instructions

It is important to note the following safety information.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water, unless it is mounted in an approved enclosure.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

Unless the apparatus is mounted in an approved enclosure, unplug it during lightning

storms.

Unplug the apparatus when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-cord supply or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

Warning: To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture unless it is mounted in an approved enclosure.

HelixNet Industrial KB Station User Guide

1.1 Safety symbols

Familiarize yourself with the safety symbols in Figure 1: Safety symbols. These symbols are

displayed on the apparatus and warn you of the potential danger of electric shock if the

system is used improperly.

Figure 1-1: Safety symbols

Note: Important. For compliance notices, see 9 Compliance.

1.2 Further information

For the latest information about HelixNet Partyline, including software updates, see:

http://www.clearcom.com/product/helixnet.

For information about Clear-Com accessories, including headsets and gooseneck

microphones, see http://www.clearcom.com/product/accessories.

For legal and contact information, see Page 2 of this guide.

HelixNet Industrial KB Station User Guide

2 Introduction

This guide is intended to help you install, configure, and use the HelixNet®Industrial KB

Station (IKB-12P).

The HelixNet Industrial KB Station is an easy-to-use intercom station that connects to a

single partyline and enables users to send and receive audio. A HelixNet Main Station (HMS-

4X) connect to and controls up to 64 Industrial KB Stations, and each station is individually

configured and controlled using a menu driven display and a browser-based software

configuration tool. The unit can be wall mounted or placed in a dedicated desk top unit.

The user station is easily expanded to include up to 40 call buttons. Each call button is

assigned a profile which determines the button’s functionality.

HelixNet Industrial KB Station User Guide

3 Panels and Interfaces

3.1 Industrial KB Station front panel

Figure 3-1 Industrial KB Station front panel

HelixNet Industrial KB Station User Guide

Key to Industrial KB Station front panel

Feature

Description

Handset. The handset contains a Push-To-Talk (PTT) button.

OLED display screen. An OLED display that shows three horizontal lines of

text. In normal operating mode the display shows:

The User Name

The audio volume

The profile name. For information about profiles, see 5.5 Profiles.

In Menu mode, the display shows the menu driven configuration options.

If the display is in Menu mode, the display screen times out of Menu mode and

reverts to normal operating mode.

For more information about Menu mode, see 5.1 Using the menus.

Audio level rotary control/menu navigation. To increase the volume to the

handset loudspeaker / headphones, turn clockwise (up to 360°). To decrease

the volume, turn counter-clockwise (up to 360°).

Customisable call key labels.

Handset socket (4-pin XLR–M)

Function

Mic ground

Mic positive

Earphone ground

Earphone positive

Table 3-1 : Headset socket pin out

12 station call keys.

Audio alert buzzer

Table 3-2 Key to Industrial KB Station front panel

HelixNet Industrial KB Station User Guide

3.2 Industrial KB Station rear panel

Figure 3-2 Industrial KB Station rear panel

For information on expanding the unit to include more call buttons, see 4.4 Installing the

Industrial KB Station

You can install the Industrial KB Station in a network which has a DHCP server which

automatically assigns IP addresses, or in a network where you manually assign IP addresses.

It is recommended to use a DHCP server if possible.

3.2.1 DHCP enabled networks

To install the Industrial KB Station in a network with a DHCP server:

1) Ensure that there is a HelixNet Main Station (HMS-4X) in your network and that the

Main Station is set to DHCP enabled. From the Main Station menu, select

Networking > Preferences > DHCP > Enabled. See the HelixNet Partyline User

Guide for more information.

Note: Enabled is the default Main Station DHCP setting.

Phoenix

connectors

for panel

expansion

Ethernet

connector

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clear-Com Gegensprechanlage Handbücher

Clear-Com

Clear-Com KB-702GM Bedienungsanleitung

Clear-Com

Clear-Com SB-704 Bedienungsanleitung

Clear-Com

Clear-Com Eclipse HX-Median Bedienungsanleitung

Clear-Com

Clear-Com TEMPEST 2400 Bedienungsanleitung

Clear-Com

Clear-Com KB-111A Fehlerbehebungshandbuch

Clear-Com

Clear-Com Eclipse HX-PiCo Bedienungsanleitung

Clear-Com

Clear-Com HME DX410 Bedienungsanleitung

Clear-Com

Clear-Com BP410 Bedienungsanleitung

Clear-Com

Clear-Com ECLIPSE ICS 92/52 Bedienungsanleitung

Clear-Com

Clear-Com RS-700 Series Bedienungsanleitung

Clear-Com

Clear-Com WBS-670 Bedienungsanleitung

Clear-Com

Clear-Com FreeSpeak II Integra Bedienungsanleitung

Clear-Com

Clear-Com FreeSpeak II Integra Bedienungsanleitung

Clear-Com

Clear-Com HelixNet Partyline Bedienungsanleitung

Clear-Com

Clear-Com FreeSpeak Edge Bedienungsanleitung

Clear-Com

Clear-Com ECLIPSE EASI-PICO MATRIX Bedienungsanleitung

Clear-Com

Clear-Com TEMPEST 2400 Bedienungsanleitung

Clear-Com

Clear-Com LQ-2W2 Bedienungsanleitung

Clear-Com

Clear-Com WBS-680 Bedienungsanleitung

Clear-Com

Clear-Com FreeSpeak II Bedienungsanleitung

Clear-Com

Clear-Com HBP-2X Kurzanleitung

Clear-Com

Clear-Com Encore V-Box Bedienungsanleitung

Clear-Com

Clear-Com ENCORE EF-701M Bedienungsanleitung

Clear-Com

Clear-Com Tempest 2400 MasterBelt Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung