Clear One MAX EX Bedienungsanleitung

To Connect Max EX

1. Connect the Cat. 5 cable from the Link Out jack on the base unit to the Link In

jack on the conferencing pod.

2. Connect the base unit to the telephone jack using the RJ-11 telephone cable.

3. Connect the power cord to the base unit and plug it into an electrical outlet.*

* The power cord is not included with base units that plug directly into an electrical outlet.

To Connect Additional Units

1. Connect the 12' Cat. 5 cable to the Link Out jack on the first phone and the

Link In jack on the second phone.

2. Continue linking up to three additional Max EX phones in the same fashion. A

total of four units may be connected.

CONFERENCE PHONE SETUP

800-158-016 Rev. 2.0. U.S. Patent No. D499,392.

ClearOne Communications ~ 1825 Research Way, Salt Lake City, UT 84119 ~ 1-800-945-7730 ~ www.clearone.com

Getting Started Guide

tel 1-800-283-5936

1-801-974-3760

fax 1-801-977-0087

e-mail tech.suppor[email protected]

To Access the Programming Menus

Press and hold until appears on the LCD screen. Then press the key that

corresponds with the desired menu option and follow the instructions below.

PROGRAMMING OPTIONS

Max™EX

Audio Conferencing

TECHNICAL SUPPORT

*Press & hold the "1" key to enter a hyphen or the "*" key to enter a space in the number. If a number has already been

programmed, use CLEAR to delete the old number before entering the new number.

Ringer Melody 1

Dialing Mode

Flash Duration 3

Local Number* 4

Conference* 5

Service* 6

Key ProgrammingMenu Option

1-5 to select a new melody. Press to save selection.

Press . The current melody selection flashes. Press

1 for tone, 2 for pulse. Press to save selection.

Press . The current dialing selection flashes. Press

Press . Enter the phone number that you want the

Conference key to dial. Press to save the number.

duration. 1 = 600ms, 2 = 300ms, 3 = 150ms, 4 = 100ms, 5 = 80ms.

Press . The current duration flashes. Press 1-5 to select

Press to save selection.

appear on the LCD screen when the phone is in standby.

Press . Enter the phone number that you want to

Press to save selection.

Press . Enter the phone number that you want the

0key to dial. Press to save the number.

Country 7Press . Press the number key that corresponds with the

desired country. 1 = US/Canada/China/Japan/Mexico/Singapore,

2 = Europe CTR 21, 3 = Australia,4 = S. Africa,5 = Brazil, 6 = New Zealand,

7 = South Korea. Press to save the country setting.

Press CLEAR to exit Programming mode.

CAUTION: Read the Safety Information in the user manual.

25' Cat. 5 cable

RJ-11

telephone

cable

To Link In

To Link Out

Rear of conferencing pod

Rear of base unit

12' Cat. 5 cable

From Link Out

To Link In

To Link Out on Base Unit

25' Cat. 5 cable

Max EX

Icon Description

Phone Program

Mute

Phonebook

Ringer Off

Scroll

Icon Description

Getting Started Guide

To Make a Call

1. Press the ON/OFF key to activate

the phone. You will hear a dial tone.

2. Dial the number as you would on a

standard phone. The number appears

on the LCD screen.

You can also predial the number

while in Standby mode and press the

ON/OFF key to connect the call.

To add a pause to the number you

are predialing, press and hold the

pound (#) key.

To Answer a Call

•Press any key (except “*” key,

MUTE,VOLUME UP or VOLUME

DOWN).

When there is an incoming call, the

phone rings (unless the ringer is

turned off) and the phone LEDs and

phone icon on the LCD screen flash.

To End a Call

• Press the ON/OFF key.

To Turn the Ringer On/Off (In Standby)

• Press and hold the star key (*).

To Adjust Ringer Volume

•While the phone is ringing, press

VOLUME UP or VOLUME DOWN.

• While the phone is inactive, press

VOLUME UP or VOLUME DOWN.The

ringer melody will play once at the

new level.

To Access Your Conferencing Service

• Press the CONFERENCE key. This

feature must be programmed before

use.

To Access Your Service Center

• While in Standby mode, press and

hold the 0key for 2 seconds.This

feature must be programmed before

use.

To Store a Number in the Phonebook

1. Enter the number while phone is in

standby (inactive) mode.

2. Press and hold the PHONEBOOK key

until the Phonebook and Program

icons appear.

3. Assign a Phonebook location (0–9)

by pressing the corresponding

number key.

4. Press PHONEBOOK again to save the

entry. You will hear a confirmation

tone.

5. To exit Phonebook Edit mode before

saving the entry, press CLEAR.

To Make a Call Using the Phonebook

1. Press the PHONEBOOK key.

2. Press the number (0-9) that

corresponds with the stored phone

number you want to dial. The number

will be displayed on the LCD screen.

3. Press the ON/OFF key to dial the

number.

The phone icon appears when the phone is

active.

Phonebook and Program icons

The Phonebook and Program icons.

Ringer off icon.

USING THE PHONE

KEYPAD FUNCTIONS

LCD DISPLAY

Andere Handbücher für MAX EX

Andere Clear One Konferenzsystem Handbücher

Clear One

Clear One Converge Pro 880 Bedienungsanleitung

Clear One

Clear One Converge Pro 880 Bedienungsanleitung

Clear One

Clear One COLLABORATE ROOM PRO Bedienungsanleitung

Clear One

Clear One COLLABORATE Versa Room CT Bedienungsanleitung

Clear One

Clear One ClearOne RAV 600 Handbuch

Clear One

Clear One XAP 80 Bedienungsanleitung

Clear One

Clear One INTERACT AT-OC Bedienungsanleitung

Clear One

Clear One INTERACT PRO Bedienungsanleitung

Clear One

Clear One COLLABORATE Live 600 Bedienungsanleitung

Clear One

Clear One Versa Mediabar Aura Bedienungsanleitung

Clear One

Clear One XAP TH2 Bedienungsanleitung

Clear One

Clear One CONVERGE PRO 2 Bedienungsanleitung

Clear One

Clear One Converge Pro TH20 Bedienungsanleitung

Clear One

Clear One INTERACT PRO Bedienungsanleitung

Clear One

Clear One COLLABORATE Live 600 Bedienungsanleitung

Clear One

Clear One Converge Pro 840T Bedienungsanleitung

Clear One

Clear One BMA CTH Bedienungsanleitung

Clear One

Clear One Converge Pro 880 Montageanleitung

Clear One

Clear One ClearOne RAV 600 Bedienungsanleitung

Clear One

Clear One Aura VERSA PRO 50 Bedienungsanleitung

Clear One

Clear One VERSA 20 Bedienungsanleitung

Clear One

Clear One ClearOne RAV 600 Bedienungsanleitung

Clear One

Clear One Collaborate Bedienungsanleitung

Clear One

Clear One Converge Pro 840T Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung