Clear One Ceiling Microphone Array Dante Bedienungsanleitung

Ceiling Microphone Array Dante™

Quick-Start Guide

PRODUCT OVERVIEW .................................................................. 1

PARTS ............................................................................................ 1

TOOLS REQUIRED........................................................................ 1

INSTALLATION .............................................................................. 2

MICROPHONE ARRAY PLACEMENT ........................................... 2

COMPLIANCE................................................................................ 5

CE................................................................................................... 5

PLENUM......................................................................................... 5

Table of Contents

QUICK-START GUIDE

PRODUCT OVERVIEW

The Ceiling Microphone Array (CMA) Dante™ is the newest addition

to our ceiling mic lineup and most advanced tri-element, ceiling

microphone array with built-in Dante audio networking interface for

conferencing and sound reinforcement applications. Flexible and easy

to use, the CMA is 100% RF immune, optimized for speech-intelligibility,

and can daisy-chain for easy installation.

PARTS

The Dante CMA comes with the following parts:

• Mic Array

• Junction Box &

30 ft. CAT6 cable

• Interface Box

(PoE*Power Injector or Ethernet Switch not included)

The mic array is made up of 3 components:

Mic Capsule

Drop Cable

Integrated Fixing Assembly that

allows drop-down height adjustment

A drill with a 7/8” saw bit

TOOLS REQUIRED

*IEEE 802.3af CLASS III, Mode A or B

CEILING MIC ARRAY DANTE

MICROPHONE ARRAY PLACEMENT

Determine placement of an array by its pickup pattern and room

characteristics. Adjusting drop-down height from 0 to 7 ft. determines

how close an array is to users, and how far its pickup pattern extends.

INSTALLATION

1. Drop the ceiling tile where you are installing the microphone array.

2. Place the Junction Box in the space above the suspended ceiling

where you want to place the microphone array, and the Interface Box

in an adjacent space in the open ceiling.

3. If mounting the boxes, secure screws. You must supply your own

screws appropriate to your mounting structure.

NOTE: Mount ears are pre-installed on both boxes, with holes

sized for M3 or #6 size screws.

IMPORTANT: Installer is responsible for making sure structure

can support the weight of all equipment. Reinforce ceiling

structure as necessary.

QUICK-START GUIDE

4. The holes in the mounts may also be used to attach a Ø3mm (Ø1/8”)

safety cable. You must supply your own safety cable.

5. Run the 30 ft. CAT6 cable (included) from Junction Box to Junction

Box, and Junction Box to Interface Box.

6. Drill a 7/8” hole in the removed ceiling tile for mic cable pass-through.

Drill 7/8” Hole for Placement of

Ceiling Adapter

7/8" HOLE TEMPLATE

1:1 SCALE

7/8” Hole

Template

7. Place the ceiling adapter in the hole, and pass the drop cable through.

8. Tighten the washer snugly into place against the ceiling adapter.

9. Adjust the length of drop-down for the cable as needed.

10. Slide the collet cap up to the ceiling adapter, and tighten snugly.

CEILING MIC ARRAY DANTE

11. Connect the CMA cable to the Junction Box.

12. Run the CAT5e/6 cable from the Interface Box location to the Network

Switch. You must supply your own CAT5e/6 cable.

13. Put the tile(s) back into place.

Digital

Junction

Box

Dante Interface Box

Sample Scenario:

Four Dante Mic Arrays connecting to a CONVERGE Pro 2 mixer.

Dante Interface unit provides Primary and Secondary Dante ports for Dante network

redundancy.

* If the Ethernet Switch is not PoE enabled, then use external PoE Power Injector.

Custom

Cable

CAT6 Cable,

Max 33 Feet

(10 meters)

Max 7 Feet

(2 meters)

DSP Mixer, with Dante

LAN

(Ethernet

Switch)

* PoE Power,

Audio, Control

12 Channels

Audio and

Control

through Dante

CAT6 Cable,

Max 330 Feet

(100 meters)

CAT6 Cable,

Max 330 Feet

(100 meters)

Ceiling Tile

Mic Array 4

Mic Array 1 Mic Array 2 Mic Array 3

CAT6 Cable,

Max 33 Feet

(10 meters)

CAT6 Cable,

Max 33 Feet

(10 meters)

CAT6 Cable,

Max 33 Feet

(10 meters)

Custom

Cable

Max 7 Feet

(2 meters)

14. Connect Network Switch to the DSP mixer with a CAT5e/6 cable.

QUICK-START GUIDE

Information in this document is subject to change without notice. QSG-0062-001 Rev 1.0 MAY 2018

Headquarters:

5225 Wiley Post Way

Suite 500

Salt Lake City, UT 84116

Tel: 801.975.7200

Sales: 800.707.6994

US & Canada

Tel: 801.975.7200

Toll Free: 800.945.7730

Fax: 801.303.5711

International

Tel: +1.801.975.7200

e-mail: [email protected]

Sales

Tel: 801.975.7200

e-mail: [email protected]

TechSupport

Tel: 801.974.3760

e-mail: tech.support@clearone.

com

CLEARONE LOCATIONS

COMPLIANCE

This product complies with the requirements of the European Community

Directive.

PLENUM

This product meets the UL 2043 plenum-rating standard. This certifies

that the product has adequate fire resistance and low smoke-emission

characteristics to be mounted and operated in a building’s environmental

air spaces, such as above suspended ceilings in an office environment.

Inhaltsverzeichnis

Andere Clear One Mikrofonsystem Handbücher

Clear One

Clear One BMA CT Bedienungsanleitung

Clear One

Clear One WS840D-M610 Bedienungsanleitung

Clear One

Clear One WS800 Bedienungsanleitung

Clear One

Clear One Beamforming Bedienungsanleitung

Clear One

Clear One DIALOG 20 Bedienungsanleitung

Clear One

Clear One BMA 360D Bedienungsanleitung

Clear One

Clear One WS880 Bedienungsanleitung

Clear One

Clear One DIALOG 10 USB Bedienungsanleitung

Clear One

Clear One Beamforming Microphone Array Bedienungsanleitung

Clear One

Clear One DIALOG 20 Bedienungsanleitung

Clear One

Clear One BMA 360 Bedienungsanleitung

Clear One

Clear One DIALOG 20 Bedienungsanleitung

Clear One

Clear One DIALOG 20 Bedienungsanleitung

Clear One

Clear One WS800 Benutzerhandbuch

Clear One

Clear One BMA 360D Bedienungsanleitung

Clear One

Clear One WS800 Bedienungsanleitung

Clear One

Clear One DIALOG 20 Bedienungsanleitung

Clear One

Clear One WS800 Bedienungsanleitung

Clear One

Clear One DIALOG 20 Bedienungsanleitung

Clear One

Clear One WS800 Benutzerhandbuch

Beliebte Mikrofonsystem Handbücher anderer Marken

Paso

Paso R824 Bedienungsanleitung

Naxa

Naxa NAM-982 Bedienungsanleitung

Motorola

Motorola PMNN4461 Bedienungsanleitung

Xvive

Xvive U3 Bedienungsanleitung

Tekon

Tekon DUOS Bedienungsanleitung

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Bedienungsanleitung

Devine

Devine WMD-IE Bedienungsanleitung

LG LF-D7150 Bedienungsanleitung

GE S768DAV Bedienungsanleitung

LD U305 HBH 2 Bedienungsanleitung

Chainway

Chainway URA8 Bedienungsanleitung

ORATOR

ORATOR D860TD Bedienungsanleitung

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Bedienungsanleitung

Alpha Technologies

Alpha Technologies RBMS Bedienungsanleitung

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Bedienungsanleitung

Shure

Shure UA844 Bedienungsanleitung

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Bedienungsanleitung

Pyle

Pyle PDWM5000 Bedienungsanleitung