ClearSounds CSC 600 Fehlerbehebungshandbuch

1 – ENGLISH

CSC 600

V508

FRANÇAIS ESPAÑOL ENGLISH

CSC-600-TriLingual.indd 1 6/2/08 1:38:30 PM

2 – ENGLISH

3 – ENGLISH

Congratulations on your purchase of the CSC600 Phone from

ClearSounds Communications®. Please read this User Guide carefully

in order to get the very best results from your telephone. Keep the

manual near the telephone for easy reference.

Please visit our web site at www.clearsounds.com to: Register your

product, download additional manuals, and review trouble shooting

tips.

Due to the nature of VOIP/Broadband technology results may vary

when used with VOIP/Broadband service

IMPORTANT SAFETY INSTRUCTIONS

Read and understand the Installation Guide & User Manual. When

using your telephone equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and injury

to person, including the following.

WARNING: The CSC600 Phone is capable of amplifying sounds to

a loud volume. It is important to instruct all potential users of its

proper operation. It is advised to adjust the volume control to the

minimum level (Low) when not in use and alert other users that

hearing damage can potentially result from misuse.

WARNING: To avoid the possibility of electrical shock, do not use

this product near water (For example, near a bathtub, wash basin,

kitchen sink or laundry tub, in a wet basement or near a swimming

pool) while in the bathtub or shower or when you are wet. If the

phone becomes submerged in water, do not attempt to retrieve it

until after you have unplugged the AC adapter from the electrical

outlet and the line cord from the modular wall jack. Do not plug the

phone back in until it has dried completely.

WARNING: Avoid using the telephone during electrical storms.

There may be a remote risk of electric shock from lightning. If the

electrical storm is present in your immediate area, possibility of

electrical shock exists.

WARNING: Do not use the phone if you suspect a gas leak in the

area. The phone’s electrical contacts could create a spark, which

could ignite any heavy concentration of leaking gas.

WARNING: Do not use liquid cleaners or aerosol cleaners on the

telephone. Use a damp cloth for cleaning.

CSC-600-TriLingual.indd 2 6/2/08 1:38:30 PM

2 – ENGLISH

3 – ENGLISH

WARNING: No telephone should ever be placed near an open radiator

or heating register.

WARNING: Occasionally a power surge can occur on electrical lines

without warning. With any electrical device that you plug into an

outlet, it is suggested you use a surge protector. A surge protector

will prevent power surges from damaging your telephone. Surge

protectors are simple devices available at your local hardware

store.

WARNING: Never push any objects through the slots in the phone.

They can touch dangerous voltage points or short out parts that

could result in a risk of fire or electrical shock.

WARNING: Do not cover slots and openings on the unit, they are

needed for ventilation and protection against overheating. Never

place the unit near hot places where proper ventilation is not

provided.

WARNING: Unplug this unit from the wall outlet and refer servicing

to qualified service personnel under the following conditions:

A When the power supply cord or plug is damaged

B If liquid has been spilled over the unit

C If the unit has been exposed to rain or water

D If the unit does not work normally upon following the instructions. Adjust

only controls covered by the operating instructions, to avoid expensive

repairs by qualified technicians.

E If the unit has been dropped or damaged

F If the unit exhibits a distinct change in performance

CSC-600-TriLingual.indd 3 6/2/08 1:38:30 PM

4 – ENGLISH

5 – ENGLISH

PLEASE SAVE THESE INSTRUCTIONS

1 Hook switch

2 Caller ID Screen

3 Delete Button

4 Up and Down Buttons

5 Dial Button

6 Phonebook Button

7 Handset Tone control

8 Handset Volume control

9 Voice mail button

10 Call waiting

11 Programming button

12 Emergency Memory Dial

13 Amplify Button

14 Headset Button

15 Speaker Button

16 Flashing incoming call

indicator

17 Redial Button

18 M1-M5 One Touch Memory

Dial buttons

19 Speakerphone

20 Speaker Volume Control

21 Ringer Volume

22 Outgoing speech volume select

switch (LO/NORMAL/HI)

23 Audio Neckloop jack

24 Optional Bed Shaker Jack

25 Ringer, Strobe, Shaker,

Selector

26 Auto Amplify/Volume reset

override

27 AC Power Adapter Jack

28 Phone line jack

29 Handset cord jack

30 Headset jack

31 Battery Compartment

32 Dialing Mode Switch (Tone/

Pulse)

33 Message Waiting Indicator/

Off/On switch

SPCH VOL





































CSC-600-TriLingual.indd 4 6/2/08 1:38:33 PM

4 – ENGLISH

5 – ENGLISH

Installation of your ClearSounds®CSC600 Amplified Phone is easy.

There are some basic steps you need to take when you set-up your

CSC600 Phone for the first time.

1 Check parts list.

a Handset with handset cord and phone base

b Telephone line cord

c User’s Manual

d AC Power Adapter

2 Install (4) AAA Alkaline batteries (optional). This provides back-up power to

the Caller ID Screen.

3 Phone mounting installations.

4 Set the dialing mode.

5 Choose desktop or wall mount.

6 Set ringer and auxiliary alert.

7 Program your memory dial buttons.

INSTALLING THE OPTIONAL BATTERIES

The batteries are necessary in case of network power failure to save

stored numbers in memory and in the phone book.

1 Begin by unplugging the AC adapter & line cord before installing new

batteries.

2 Open the battery compartment door located on the bottom of your phone

by unscrewing the battery compartment door and removing it from the

bottom of your phone (screwdriver provided).

3 Correctly insert 4 AAA alkaline batteries (purchased separately) in the

battery compartment. Be sure to observe battery polarity as imprinted

on the base of the compartment.

4 Replace the battery compartment door and screw back in place.

BATTERY SAFETY

1 When replacing the batteries in your CSC600 phone, make sure to put

the batteries in correctly.

2 Never mix battery types (different chemistries, brands and/or fresh vs. used).

3 Never dispose of batteries in fire, as they could explode.

4 Remove worn-out batteries from equipment immediately and dispose of

promptly.

5 Do not attempt to recharge a battery unless the battery specifically is

marked “rechargeable.”

CSC-600-TriLingual.indd 5 6/2/08 1:38:33 PM

6 – ENGLISH

7 – ENGLISH

NOTE: Disposing of used batteries improperly may cause en-

vironmental damage.

PHONE MOUNTING INSTALLATIONS

The telephone may be placed on a shelf or table, or may be fixed to

a wall using the mounting bracket.

Plug the AC Adapter into the AC power back on the back of your

phone, then into an electrical outlet or surge protector, if you are

using one.

NOTE: The adapter is required for the telephone to work correctly. If

the adapter is accidentally unplugged (or in case of power failure)

the amplification feature will not work properly. If the batteries are

dead or not installed, some of the phone features will not work.

IMPORTANT: Please remove the clear plastic Caller ID tab. This film

tab is only for display and to protect your Caller ID display during

shipping.

Desk / Table Use

1 Connect one end of the 6ft telephone cord to the line jack on the back of

your CSC600 Phone and connect the other end to a modular phone jack

(RJ11C).

2 Connect the handset coil cord (curly cord) to the handset and to the

telephone.

3 Lift the handset and listen for a dial tone. If you hear a dial tone, your

phone is ready to use. If there is no dial tone, check all your cords to

make sure they are plugged in securely.

Wall Mount Use

1 Slide the handset hanger tab out and reverse its position (rotate it 180

degrees). Slide it back into place so that the hook points up. This will

keep the handset from falling out of the cradle when it is mounted on

the wall.

2 Plug the 8in short phone cord into the telephone jack on the CSC600, run

phone cord underneath wall plate adapter and through the opening.

3 Insert the Wall Plate adapter. Hold the wall plate adapter so that the raised

mounting pins line up with the phone’s keyholes on the CSC600. Once the

holes are lined up, push the wall plate adapter in towards the CSC600 and

then slide the plate upwards until it is securely seated on the phone.

4 With the Wall Plate adapter installed, plug the 8 inch short cord into the

jack on the wall.

5 Holding the phone slightly above the mounting screws on the wall jack,

push the phone against the mounting screws so they are hooked into

CSC-600-TriLingual.indd 6 6/2/08 1:38:33 PM

6 – ENGLISH

7 – ENGLISH

upper and lower key hole slots on the back of the phone. Slowly slide

the phone down until it snaps into place.

6 Connect the handset coil cord (curly cord) to the handset and to the

telephone.

7 Attach the AC Power Adapter to the back of the phone and plug the other

end into a working electrical outlet (not controlled by a wall switch).

8 Lift the handset and listen for a dial tone. If you hear a dial tone, your

phone is ready to use. If there is no dial tone, check all your cords to

make sure they are plugged in securely.

SETTING UP PHONE

BASIC FUNCTIONS

Setting The Dialing Mode

Set the dial mode switch on the bottom of the phone to “T” if you have Touch

Tone service, or “P” for Pulse dialing if you have rotary dialing service. The

default is set to the “T” dialing switch mode.

Redial Function

This feature allows you to redial the last number you have called by

one-touch operation.

1 Lift the handset or press the SPEAKER button to get a dial tone.

2 Press the REDIAL button to redial the last number called.

Flash Function

Press the CALL WAITING button to end a call and get a dial tone for another

call or to switch to another call from “call waiting”.

NOTE: You must subscribe to Call Waiting Service from your local phone

company. If you do not subscribe to Call Waiting, pressing the CALL WAITING

button during a call may disconnect your current call.

Speakerphone

Making A Call Using The Speakerphone

1 Press the SPEAKER button for dial tone.

2 Adjust the volume to fit your needs. Move the Speaker Volume

Adjustment Switch located to the side of the telephone.

3 To dial a number you can:

a Dial a number from the keypad

b Press one of the Priority or Memory dial buttons

c Dial from your Phone Book or Caller ID

CSC-600-TriLingual.indd 7 6/2/08 1:38:33 PM

8 – ENGLISH

9 – ENGLISH

4 On completion of the call, press the SPEAKER button again.

Receiving/Answering A Call Using The Speakerphone

1 Press the SPEAKER button while the phone is ringing to answer.

2 Adjust the volume to fit your need (Same as above).

3 On completion of the call, press the SPEAKER button again.

Switch between Handset and Speakerphone

While on a handset call, press the SPEAKER button and replace the

handset in the cradle.

While on a speakerphone call, lift the handset.

Using the Amplification Function

The CSC600 Phone has an “AMP” button that controls the loudness

and tone of the handset. Without pressing the “AMP” button, you

are able to amplify the handset up to 30 dB of amplification. Once

the “AMP” button is pressed, an extra level of amplification is added

providing 30 to 50 dB of gain and tone control.

Voice Amplification and Tone

Your CSC600 Phone is equipped with a specialized amplification

functiondesignedtofityourneeds.Youcanadjustthevolumeandtone

(sound frequency range) of the incoming voice by simply adjusting

Volume and Tone Controls. To use the specialized amplification boost

and tone control features, follow these directions.

1 Once you have dialed the phone or answered a call, press the “AMP”

(amplify) button. This turns the incoming voice amplifier ON. When the

amplifier is ON, you will see the red light on the left side of the “AMP”

button light up.

2 Once you have engaged the amplification feature you will have the

ability to adjust the volume and tone to fit your needs by adjusting the

VOLUME and TONE controls until you find the right levels for you. The

Volume Control increases sound volume. Slide the Volume Control to

the right to increase the volume and slide it to the left to decrease the

volume. The Tone Control allows you to fit your specific hearing needs.

Slide the Tone Control to the left to boost the lower frequency range.

Slide the Tone Control to right to boost the high frequency range. This

allows individuals with BOTH high frequency and low frequency hearing

loss to use the CSC600 Phone.

CAUTION: This telephone can produce very high (loud) sound

levels. Repeated incremental exposure to amplification levels

greater than 18 dB may be harmful to people without hearing loss.

Always adjust the volume control to the minimum setting after

using the phone and alert other users that hearing damage can

CSC-600-TriLingual.indd 8 6/2/08 1:38:33 PM

8 – ENGLISH

9 – ENGLISH

potentially result from misuse.

Using the volume reset override

In standard mode, the phone will reset to normal sound levels when you hang

up. This allows people who do not require the level of amplification offered

on the phone to use it. If you would like to override the reset, simply turn the

AUTO AMPLIFY switch on the back of the phone to “ON” using the tip of a

pencil or paper clip

IMPORTANT: When the AUTO AMPLIFY switch is in the “ON” position, you do

not need to press the “AMP” (amplify) button. Your amplification setting will

remain as set. On any call, you can temporarily turn OFF and turn back ON the

AUTO AMPLIFY feature by pressing the “AMP” button. If you do not utilize the

Reset Override feature you will need to press the AMP button to manually turn

on the amplification during calls.

NOTE: When the amplifier turns on, the red indicator lamp near the AMP button

will be lit. The AUTO AMPLIFY switch will be pre-set to the OFF position at

the factory.

Using your CSC600 Amplified Phone with hearing aids

Your CSC600 Phone can be used with hearing aids equipped with a

telecoil (T-coil). Adjust your hearing aid “T-switch” to the “T” position.

Make sure to hold the handset close to your hearing aid.

Using the Outgoing Speech Volume

You can adjust the sending volume (outgoing volume up to 12 dB

of gain) by using the Speech Volume Control located on the right

side of your CSC600 Phone. If your voice is faint or weak, adjust the

volume to “HI”. You can also decrease the volume as well. There are

three levels available “LO, NORMAL & HI”.

PROGRAMMING MEMORY DIAL BUTTONS

These memory dial buttons are empty. Should you choose to use this

feature you will need to select the telephone numbers for each button.

It is recommended you store these numbers during installation.

Your CSC600 Phone allows you to program five frequently dialed

numbers into memory for future use (30 digits maximum for each

button).

NOTE: We do not recommend that you program 911 into any

memory buttons!

To program your one-touch memory dial buttons please follow

instructions next page:

1 Lift the handset.

2 Press the PROG (program) button.

CSC-600-TriLingual.indd 9 6/2/08 1:38:33 PM

10 – ENGLISH

11 – ENGLISH

3 Using the keypad, dial the number you would like to save, including “1” and

the area code (if applicable).

4 Press and hold down one of the Priority or Memory Dial buttons (M1 – M5)

located on bottom of the phone for approximately 1-2 seconds. Each button

can be programmed (or reprogrammed using the same procedure) for a

phone number.

5 Hold the button until the screen displays <<SAVE OK>>

6 To register your stored phone numbers, use the phonebook insert card

located under the base.

NOTE: Numbers will be lost if the phone is not receiving any power,

either through the phone line, batteries, or AC adapter during a,

power outage or if you disconnect the phone. Entering a new number

in the same location will automatically erase the previous number.

USING AUDIO AND TELEPHONE HEADSET ACCESSORY JACKS

Your CSC600 Amplified Phone is equipped with both an Audio

and Telephone Headset Jack, providing total flexibility and multi-

functionality. Both the Audio & Headset jacks are amplified, allowing

you to adjust both the tone and volume. These jacks accommodate

a variety of optional accessories including Neckloops, Headphones,

Earbuds, Silhouettes, Cellular Accessories and Cochlear Patchcord*

(not included).

*Caution: Before plugging any cord into your Cochlear processor, you

should consult with your implant manufacturer.

Audio/Neckloop Jack

Using the 3.5mm stereo/mono jack allows you to listen through

your Neckloop or Headset while speaking into the handset or

speakerphone.

Telephone Headset Jack

Using the 2.5mm stereo jack that can accommodate many hands-

free headsets allows for total hands-free operation as you listen and

speak through your hands-free headset.

Shaker

Your ClearSounds®CSC600 Telephone incorporates several options

to alert you that the phone is ringing. The loud, adjustable Ringer as

well as the bright Strobe and optional Bed Shaker or any combination

of these allow you to customize the phone to fit your needs.

Your CSC600 Phone is equipped with a bright STROBE light, which

flashes a very bright strobe when the phone rings. It’s almost

impossible to miss telephone calls when you select the Strobe

Ringer. If you purchased the optional Bed Shaker, simply plug it

CSC-600-TriLingual.indd 10 6/2/08 1:38:33 PM

Andere Handbücher für CSC 600

Inhaltsverzeichnis

Sprachen:

Andere ClearSounds Telefon Handbücher

ClearSounds

ClearSounds TALK500 ER Bedienungsanleitung

ClearSounds

ClearSounds A600 Bedienungsanleitung

ClearSounds

ClearSounds PHONE A1600 Betriebsanleitung

ClearSounds

ClearSounds HearingEasy CSC48 Bedienungsanleitung

ClearSounds

ClearSounds Talk500-ER Bedienungsanleitung

ClearSounds

ClearSounds TALK500 ER Bedienungsanleitung

ClearSounds

ClearSounds TALK500 ER Bedienungsanleitung

ClearSounds

ClearSounds PHONE A1600 Bedienungsanleitung

ClearSounds

ClearSounds CL1100 Fehlerbehebungshandbuch

ClearSounds

ClearSounds CSC50-ER Fehlerbehebungshandbuch

ClearSounds

ClearSounds CL600 Fehlerbehebungshandbuch

ClearSounds

ClearSounds Talk500-ER Betriebsanleitung

ClearSounds

ClearSounds Liberty 30T Bedienungsanleitung

ClearSounds

ClearSounds Freedom Phone CSC1000 Bedienungsanleitung

ClearSounds

ClearSounds AMPLIFIED FREEDOM PHONE CSC600D Bedienungsanleitung

ClearSounds

ClearSounds WCSC600 Bedienungsanleitung

ClearSounds

ClearSounds v407 Fehlerbehebungshandbuch

ClearSounds

ClearSounds Freedom Phone CSC1000 Bedienungsanleitung

ClearSounds

ClearSounds A600 Bedienungsanleitung

ClearSounds

ClearSounds Geemarc PhotoPHONE 100 Bedienungsanleitung

ClearSounds

ClearSounds TALK500 V508 Bedienungsanleitung

ClearSounds

ClearSounds CSC40 Fehlerbehebungshandbuch

ClearSounds

ClearSounds A50 Bedienungsanleitung

ClearSounds

ClearSounds 40XLC Fehlerbehebungshandbuch

Beliebte Telefon Handbücher anderer Marken

GE 2-9480 Bedienungsanleitung

Geemarc

Geemarc PHOTOPHONE 155 Bedienungsanleitung

D-Link

D-Link DWR-720/PW Bedienungsanleitung

Interquartz

Interquartz Gemini IQ333 Bedienungsanleitung

SSS Siedle

SSS Siedle HT 840-0 Bedienungsanleitung

Motorola

Motorola TITANIUM Bedienungsanleitung

Panasonic

Panasonic ICX Bedienungsanleitung

LG H870DS Bedienungsanleitung

Samsung

Samsung GT-I9500 Bedienungsanleitung

AT&T

AT&T Trimline 205 Bedienungsanleitung

Selta

Selta zenyth 600 Bedienungsanleitung

Doro

Doro AFTI 20 Bedienungsanleitung

UNIQCELL

UNIQCELL A1 Bedienungsanleitung

Panasonic

Panasonic KX Series Bedienungsanleitung

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Bedienungsanleitung

BT Decor 425 Bedienungsanleitung

NEC

NEC SV8500 Bedienungsanleitung

Teledex

Teledex PEARL Bedienungsanleitung