ClearSpan 105757 Bedienungsanleitung
1
Visit www.ClearSpan.com for additional products and customer assistance.
WARNING: Identify whether underground cables
and/or pipes are present before installing the frame
kit ground stakes. Do not attempt to install the
frame kit during windy or stormy days.
ATTENTION: The Frame Kits for the 9' and 12'
tall storage bags and shelters include additional
16' straps (with ratchets) to use in place of the 10'
straps included with the anchor kits. The 10' straps
can be used as needed for other applications.
Thank you for purchasing this ClearSpan™ frame kit.
These instructions include helpful hints and important
information needed to safely assemble and attach the
kit. Please read these instructions before you begin.
SAFETY PRECAUTIONS
Wear eye protection.
Wear gloves when handling metal tubes.
Use a portable GFCI when working with power tools
and cords.
•
•
•
The following list identifies the main tools needed to assemble and attach the kit components. Additional tools and
supports may be needed depending on the shelter and application.
Wrench, ratchet and socket (recommended)
Hammer and gloves
•
•
FA2071
Eyebolt
FAMF03B
Fender Washer
FALB02B
Nut
ASSEMBLE THE FRAME KIT
You will need the following parts:
1" Frame Support Pipe (length determined by
shelter)
FA2071 Eyebolts
105575 Star Nuts for 1" Pipe
FAMF03B Fender Washers
FALB02B Nuts
•
•
•
•
•
Take a 1" diameter plain pipe and install one (1) star nut (#105575) in one end of the pipe. Use a hammer to tap
the star nut into the pipe end. Do not use a tool that can damage the threads in the center of the star nut.
1.
Frame Kit 105757, 105758 and 105759
Installation Instructions
#105575
Visit www.ClearSpan.com for additional products and customer assistance.
2
ATTACH EYEBOLT ASSEMBLIES
Take one eyebolt assembly and attach it to the
storage bag (or shelter).
1.
Locate the eyebolts, fender washers, and nuts and
assemble each as shown below.
2.
ASSEMBLE THE FRAME KIT (CONTINUED)
FA2071
Eyebolt
FAMF03B
Fender Washer
FALB02B Nut
NOTE: The remaining nuts and washers are used
when the eyebolt assemblies are attached to the
storage bag (or shelter).
Set the pipes and eyebolt assemblies in an
accessible place and continue by placing the storage
bag (or shelter) in the desired location.
Continue by attaching the eyebolt assemblies and
frame support pipes to the storage bag (or shelter).
3.
4.
Corner of
shelter
Eyebolt
Fender
Washer
Nut
Fender
Washer
Diagram may show
shelter of a similar
design
Nut
Repeat Step 1 and attach all remaining eyebolt
assemblies to the storage bag (or shelter).
2.
3
Visit www.ClearSpan.com for additional products and customer assistance.
Take one 1" plain pipe and twist it onto one of the attached eyebolts.3.
ATTACH EYEBOLT ASSEMBLIES (CONTINUED)
Photo may show a slightly different
application.
Pipe with
installed
star nut.
NOTE: Hand-tighten the pipe until it is snug. Secure shelter material tightly between the washers.
Repeat the steps and attach the remaining frame support pipes.
With all supports attached to the storage bag (or shelter), place the frame pipes in position as shown in the
following photos and anchor the pipes in place using the anchor kits.
4.
5.
Consult the anchor kit installation information to properly attach and secure the anchor kit.
ATTENTION: Each Anchor Kit (#103599) contains four (4) individual anchor sets. Depending on the length of
your shelter, you may have anchor sets (ground stakes and ratchet/straps) that are not used.
6.
Place the lower part of each frame support
on the storage bag to keep the bag in
position.
Dashed lines show the positions of the end
frame support pipes.
Assembled Frame Support Pipe
Visit www.ClearSpan.com for additional products and customer assistance.
4
Anchor Kit 103599
Installation Instructions
This anchor kit is not designed for larger shelters or for use in sand or on hard surfaces such as asphalt or
concrete. Installing ground stakes at each frame support is required for proper support of the shelter.
ATTENTION: Use the 16' straps (with ratchets) for the 9' and 12' tall storage bags/shelters.
STEP 1: Remove the protective plastic sleeve.
STEP 2: At each frame support pipe, measure at least
three feet (3') in the desired direction and twist a
ground stake into the ground.
STEP 3: Twist stake clockwise until triangular top
touches the ground.
STEP 4: Hook the attached S-Hook in the eye of the
eyebolt assembly.
STEP 5: Insert the loose end of long strap into the
ratchet and tighten to keep strap in place.
STEP 6: Hook the remaining S-Hook through the
triangular top of the ground stake and tighten the
ratchet.
NOTE: If the strap
buildup is too great
in the ratchet, loosen
the ratchet, remove
excess strap, and
retighten the ratchet.
DO NOT remove too
much strap.
STEP 7: Repeat the steps as needed to secure each
frame support pipe to a ground stake.
ATTENTION: DO NOT OVERTIGHTEN RATCHETS.
Diagram shows how
to position straps and
ground stakes at each
corner for proper
support.
Storage Bag
Top View
Dashed lines represent ground anchor straps.
5
Visit www.ClearSpan.com for additional products and customer assistance.
Space below is reserved for customer notes.
Dieses Handbuch passt für folgende Modelle
2
Andere ClearSpan Zelt Handbücher
ClearSpan
ClearSpan 104450 Bedienungsanleitung
ClearSpan
ClearSpan 104137 Bedienungsanleitung
ClearSpan
ClearSpan 108294P Bedienungsanleitung
ClearSpan
ClearSpan PB00820R3 Bedienungsanleitung
ClearSpan
ClearSpan PB00650R4 Bedienungsanleitung
ClearSpan
ClearSpan R030A00008 Bedienungsanleitung
ClearSpan
ClearSpan Round Style Mini Garage Bedienungsanleitung
ClearSpan
ClearSpan 103434 Bedienungsanleitung
ClearSpan
ClearSpan PB00566R3 Bedienungsanleitung
ClearSpan
ClearSpan Storage Master Solarguard Bedienungsanleitung
ClearSpan
ClearSpan SunBurst Bedienungsanleitung
ClearSpan
ClearSpan PB03010R5 Bedienungsanleitung
ClearSpan
ClearSpan 105624 Bedienungsanleitung
ClearSpan
ClearSpan 107770 Bedienungsanleitung
ClearSpan
ClearSpan 105115 Bedienungsanleitung
ClearSpan
ClearSpan R030B00007 Bedienungsanleitung
ClearSpan
ClearSpan 108299F Bedienungsanleitung
ClearSpan
ClearSpan PB02000R4N Bedienungsanleitung
ClearSpan
ClearSpan PB03020R4 Bedienungsanleitung
ClearSpan
ClearSpan PB00260R4 Bedienungsanleitung
