ClearWave U200 Bedienungsanleitung
User Manual
U200 EVDO USB Modem
서식 있음: 글꼴: (한글)
맑은 고딕
2
1. BEFORE USING U200......................................................................................3
About This User’s Manual .............................................................................3
Product Overview .........................................................................................3
Product Package Contents............................................................................3
Introduction to U200 USB Modem ................................................................4
Product Features ..........................................................................................4
Product handling ..........................................................................................5
Configuration................................................................................................5
2. INSTALLATION AND SETUP FOR EASYLINKY..................................................5
Installing Software.......................................................................................5
Setup Program – Windows ...........................................................................6
Setup Program - Mac OS X..........................................................................11
3. USING EasyLinky..........................................................................................16
Features .....................................................................................................16
Getting Started...........................................................................................17
Connecting .................................................................................................17
4. PREFERENCES EasyLinky..............................................................................19
General Preferences ...................................................................................19
WWAN Specific Settings .............................................................................19
VPN Settings...............................................................................................20
Update settings ..........................................................................................21
Additional Features ....................................................................................22
5. INSTALLING U200........................................................................................26
Recommended System Requirements.........................................................26
Remove the Modem from your Computer....................................................27
Using the USB Modem Extension USB cable................................................27
Trouble Shooting ........................................................................................27
CARE AND MAINTENANCE...........................................................................27
WARRANTY.................................................................................................28
SAFETY INFORMATION ...............................오류! 책갈피가 정의되어 있지 않습니다.
Regulatory Notice.......................................오류! 책갈피가 정의되어 있지 않습니다.
3
1. BEFORE USING U200
About This User’s Manual
You will find all the information you need to install and use the U200 in this user manual.
Before using the U200, you must properly install the modem by closely following the
installation instructions.
Instructions
yInstall the EasyLinky software by inserting the U200 USB Device into your PC. The
installation software is included in the U200 modem memory. When you insert the U200
into your computer, the installation process will automatically begin.
yIt is highly recommended that you read the safety precautions described in this manual
before using the U200.
Documents Included on your Modem Memory
yBroadband Usage Conditions, Terms & Conditions
yUser Manual
Product Overview
Thank you for purchasing U200 USB Modem.
The U200 is a high-speed wireless device that enables your computer to connect to 3G
high-speed wireless network.
The U200 is simple to install and use.
Product Package Contents
The following items are included in the product package. If any of the items listed below
are missing, please contact the retail location where you purchased the product.
4
Introduction to U200 USB Modem
The U200 is designed for the USB port on your computer, which is available in most PC
models. The U200 can be used to access the Internet, send and receive e-mail. It is
extremely useful when you are away from home, on the road, or wherever wired
Internet access is not readily available.
Product Features
- Power management: The U200 utilizes power management and system overhead
reduction functions provided by the USB interface for maximum power savings.
- Antenna design: Efficient, innovative design optimizes data transfer rate and sensitivity
to network signals.
- Extension USB cable connector: Connect the USB cable to your computer to increase
RF performance, and to solve clearance issues.
- USB Modem that supports Type A USB Port interface.
- Supports North American PCS (1900 MHz) and Cellular (800 MHz) bands.
- Utilizes Qualcomm QSC6085 chipset.
U200
USB Modem
USB
Extension
Cable
Quick Start Guide
Carrying Pouch
5
- Supports high-speed network technologies.
- Supports Windows XP, Vista, 7 and Apple Macintosh systems with installed EasyLinky
software and driver.
Product handling
- Do not place any adhesive labels on the USB connector. It may leave a sticky residue
that can cause problems inside the PC USB port.
- The U200 USB device should easily slide into the USB port. Do not force the U200 into
the USB port as it may cause damage to the modem and/or the port.
- keep the U200 in a dry and clean place. (Storage temperature: -22°F to 149°F [- 30°C
to 65°C]). Keep your device away from liquids, dust and excessive heat.
Configuration
To use the U200, you should install the EasyLinky software included in the modem
memory and configure the U200 USB device. See the next section for more information
on software installation and USB device configuration.
This section will guide you through the installation and setup process for EasyLinky.
Before getting started, you should become familiar with the documentation that came
with your USB Modem.
2. INSTALLATION AND SETUP FOR EASYLINKY
This section will guide you through the installation and setup process for EasyLinky.
Before getting started, you should become familiar with the documentation that came
with your USB Modem.
Installing Software
Warnings
yMake sure to complete the unplugging/ejection process before removing the U200.
If you remove the device improperly, the modem may be damaged.
Notes
yIf you have inserted the device properly, Windows will inform you of the new hardware.
Wait until Windows completes the “Found New Hardware” task.
6
Note: In Windows 2000, several windows similar to “Found New Hardware” window can
appear and disappear automatically. In Windows XP, several tool tips similar to the
“Found New Hardware” function will appear and disappear in the system tray
automatically. In Windows Vista, several tool tips similar to the “Installing device driver
software” function will appear and disappear in the system tray automatically. Once
hardware detection is complete, you will be prompted to start activation.
yIt is normal to hear a short beep sound each time you insert or remove the U200.
It is an audible notification that your PC recognizes the new hardware.
Getting Started (Windows)
To install the EasyLinky software:
1. Turn on your computer then close all applications.
2. Insert the U200 modem into your USB port.
3. Your computer will recognize U200 modem and start the installation sequence
automatically. If the program does not launch automatically, go to my computer and
select the ‘3Gstick’ drive and double click ‘start.exe’ program.
4. Follow the steps in the next section.
Setup Program – Windows
STEP 1: The “Welcome to the EasyLinky Setup Wizard” screen appears. Click the [Next]
button to continue with the installation process.
7
STEP 2: You are now ready to select the location on your computer where EasyLinky
should be installed. It is recommended that you do not modify the default destination
folder. Click the [Next] button to continue.
8
9
STEP 3: During this step the components of EasyLinky product are being installed onto
your computer. Installation will occur to the destination folder specified in Step 2.
10
STEP 4: Installation of EasyLinky is now complete. Click the [Close] button to leave the
EasyLinky setup program and begin using your new software.
Inhaltsverzeichnis
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung