Clenergy
Australia
| 1/10 Duerdin St, Clayton VIC 3168 | T: +61 3 9239 8088 | [email protected] Page 2 of 18
1. Introduction
Clenergy PV-ezRack® SolarTerrace II-A™ is a pre-assembled ground mount system suitable for
large scale commercial and utility scale installations. PV-ezRack SolarTerrace II-A has been
developed to fit any PV module. The innovative and patented SolarTerrace II-A T-Rails simplify and
improve the accuracy of the installation. SolarTerrace II-A uses high quality engineered
components, saving developers and installers time and money when delivering ground mount
projects.
Please review this instruction guide thoroughly before installing PV-ezRack SolarTerrace II-A. This
manual provides the supporting documentation for building permit applications relating to PV-
ezRack SolarTerrace II-A Universal PV Mounting System.
The PV-ezRack SolarTerrace II-A components, when installed in accordance with this guide, will be
structurally adequate and will meet the AS/NZS1170.2:2011 Amdt. 3-2012 standard. During
installation and especially when working on the ground, you will need to comply with the
appropriate occupational health and safety regulations. Please also check other regulations
relevant to your local region. Make sure that you are using the latest version of the installation
instruction guide, which you can do by contacting Clenergy by email on sales@clenergy.com.au, or
contacting your local distributor.
The installer is solely responsible for:
Complying with all applicable local or national building codes, including any that may supersede
this manual;
Ensuring that ezRack and other products are appropriate for the particular installation and the
installation environment;
Using only ezRack parts and installer-supplied parts as specified by ezRack (substitution of
parts may void the warranty and invalidate the letter of certification);
Ensuring that the ground condition are suitable;
How to recycle: according to the local relative statute.
How to disassemble: reverse installation process.
Ensure that there are no less than two professionals working on the panel installation.
Ensure the installation of the electrical equipment is performed by a professional and accredited
electrician.
Ensuring safe installation of all electrical aspects of the PV array, including providing adequate
earth bonding of the PV array and PV-ezRack® SolarTerrace II-A™ components as required in
AS/NZS 5033-2014 ADMT 2 2-2018.
