Click PTC15V2 Bedienungsanleitung

AFTER SALES SUPPORT

(AU) 1300 886 649 (NZ) 0800 836 761

1700W Ceramic Fan Heater

with Oscillation

INSTRUCTION MANUAL

MODEL: PTC15V2

2After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Contents

Important Safety Instructions 3

Product Overview 6

Getting Started 7

Operating Instructions 9

Other Useful Information 11

After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Important Safety Instructions

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Read this manual thoroughly before first use, even if you are familiar with this type of

product. The safety precautions enclosed herein reduce the risk of fire, electric shock

and injury when correctly adhered to. Make sure you understand all instructions and

warnings. Keep the manual in a safe place for future reference, along with any warranty

information, your purchase receipt and packaging. If you sell or transfer ownership of

this product, please pass on these instructions to the new owner.

Always follow basic safety precautions and accident prevention measures when

using an electrical appliance, including the following:

Electrical safety and cord handling

• Voltage: Before plugging in the heater, make sure your outlet voltage and circuit

frequency correspond to the voltage stated on the rating label.

• Electrical circuit: Always plug this heater into a separate wall outlet socket. Use a

safe socket with an earthed connection. To ensure you do not overload the circuit,

do not operate another high-wattage product on the same circuit.

• Connection: To insert the plug, grasp it firmly and guide it into the outlet.

• WARNING! No no extension cord: Do not use the heater with a power board,

adaptor or extension cord as these may overheat and create a fire risk.

• Protect the power cord:

• – Do not operate the heater with the cord coiled up; always fully unwind.

• – Do not twist or kink the cord or let it touch heated surfaces.

• – Do not put any stress on the cord where it connects to the product.

• – Never pull/carry the heater by the cord.

• – Arrange the cord away from any traffic areas so no one will trip over it.

• – Do not run the cord under carpeting or cover it with rugs, runners, etc.

• WARNING! To reduce the risk of fire, electric shock or injury:

• – Never touch the heater with wet or damp hands or feet.

• – Do not use the heater if any part of it has become wet. Immediately call a qualified

service technician to inspect the heater and replace any part of the electrical

system that has got wet.

• – Never spill liquid into the heater; never immerse the cord, plug or any part of the

appliance in water or other liquids.

• – Do not reach for an appliance that has fallen into water; switch off and unplug

immediately.

• Damaged cord: Check the power cord regularly for visible damage. If the cord

is damaged, it must be replaced by the manufacturer or appropriately qualified

personnel in order to avoid any hazards.

• WARNING! Damaged heater: Do not use this heater if there are visible signs

of damage to the heater, after it malfunctions, or after it has been dropped or

damaged in any manner.

4After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Important Safety Instructions (Cont.)

• Plug: It is normal for the plug to feel warm; however, a loose fit between the AC outlet

and plug may cause overheating and distortion of the plug. Contact a qualified electri-

cian to replace a loose outlet.

• After use: Switch off and unplug the heater from the power outlet when it is not in use

and before cleaning, servicing, moving or storing it. To disconnect, switch off the heater,

then remove the plug from the outlet. Grip the plug, do not pull the cord.

• Safety switch: Unless your home is already fitted with a residual current device (safety

switch), we recommend installing an RCD with a rated residual operating current not ex-

ceeding 30mA, to provide additional safety protection when using electrical appliances.

See your electrician for professional advice.

Usage conditions and restrictions

• Domestic use only: This heater is intended only for the heating of indoor living spaces

and only for domestic use. It is not suitable for commercial, industrial or trade use.

• WARNING! Space heating only: Do not use the heater to dry or heat clothing, shoes,

pipes or any other item, or for anything other than its intended use. Only use it as de-

scribed in this manual. Any other use is not recommended and may cause fire, electric

shock or injury.

• No outdoor use: Do not use this appliance outdoors or on wet surfaces.

• Altitude: This appliance is not intended for use at altitudes exceeding 2000m.

• Protect from moisture: This appliance is not intended for use in bathrooms, laundry

areas and similar indoor locations. Never locate this appliance where it may fall into a

bathtub or otherwise become exposed to water. Never place containers filled with liquid,

such as drinking glasses, vases, etc. on the heater.

• Ventilation: Only use this heater in a well ventilated area.

• Openings: To prevent a possible fire, do not insert fingers or allow objects to enter any

ventilation or exhaust openings. Do not block air intakes or exhaust openings. Keep the

heater clean. Keep objects at least 1.5m from the front and 0.5m from the back of the

appliance.

• WARNING! No external timer: Never operate the heater on a program switch, external

timer switch or any other appliance for automatic operation, as there is a risk of fire if the

heater is covered or positioned incorrectly. In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, do not connect it to a circuit that is regularly switched

on and off by your energy provider.

• Children: Do not let children operate the heater, supervise children at all times when

the heater is in use. Do not let children or animals touch or play with the heater. The air

outlet gets hot during operation. Close supervision is necessary when any appliance is

used by or near children.

• WARNING! Do not leave unattended during use. Always unplug it.

• WARNING! Do not use this heater in small rooms when they are occupied by persons

not capable of leaving the room on their own, unless constant supervision is provided.

After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Important Safety Instructions (Cont.)

WARNING! Do not cover!

In order to avoid overheating and creating a fire risk,

do not cover the heater in any manner.

• Usage restriction: This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning

the use of the appliance by a person responsible for their safety.

• Accessories: The use of accessory attachments not recommended by the appliance

distributor may result in fire, electric shock or personal injury.

• Location: Only use the heater in an upright position. Make sure to place it on a hori-

zontal and stable surface; do not place it on a soft surface such as on a bed, sofa or

long pile carpet, as this could cause the appliance to tip over.

• WARNING! To avoid creating a fire risk, do NOT use this heater:

• – In front of or immediately below an electrical socket outlet

• – Close to a radiant heat source

• – Behind a door

• – On long pile carpet or a flokati rug

• – Near a window where it may get splashed with rain

• – In areas where petrol, paint or other flammable liquids are stored (e.g. in a garage

or workshop), as the heater has hot and arcing parts inside which may spark

• – In the immediate surroundings of a bath, shower or swimming pool.

• WARNING! To reduce the risk of fire, keep textiles, curtains, or any other flamma-

ble material a minimum distance of 1.5m from the air outlet. Do not place towels or

other objects on the heater.

• CAUTION: Hot! Some parts of this heater are hot during use and remain hot for

some time afterwards. To avoid burns, do not let bare skin touch hot surfaces. Be

particularly careful when children and vulnerable persons are present. Always let the

heater cool down before touching it, even if it is unplugged.

• Misuse: Improper use or installation may result in the risk of fire, electric shock and/

or injury. We assume no liability for any eventual damages caused by improper use

or incorrect handling.

• Service: This heater contains no user-serviceable parts inside. Do not attempt to

open and/or repair the heater yourself. Components should only be serviced by a

qualified technician. In case of malfunction, disconnect the plug immediately and

contact our after sales support line for advice.

• Installation: The appliance requires no installation, it should be used solely as a

portable appliance.

• On first use, the heater may emit some slight odour and/or smoke. This is normal

and will only last for a moment. It is no cause for concern. Ensure good ventilation.

6After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Product Overview

NOTE:

Due to continued product improvement, images and illustrations in this manual

may vary slightly from the product purchased. All images in this manual are for

reference purposes only. Parts are not necessarily pictured to scale.

Parts of the heater

1 Control panel

2 Front safety grille

3 Ceramic heating elements

4 Oscillating base ON/OFF switch

At the back, not visible here:

5 Handle

6 Power cord and plug

Scope of delivery

After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Unpacking

• Carton: This product has been packaged to protect it against transportation

damage. Unpack the appliance and keep the original packaging carton

and materials in a safe place. It will help prevent any damage if the product

needs to be transported in the future, and you can use it to store the

appliance when it is not in use. In the event that the carton is to be disposed

of, please recycle all packaging materials where possible.

• Plastic wrapping can be a suffocation hazard for babies and young

children, so ensure all packaging materials are out of their reach and

disposed of safely.

• Cord: Inspect the power supply cord and plug, and all other parts of the

appliance, for visual damage. Do not use the appliance if anything appears

to be damaged or not working properly. In case of damage, contact our after

sales support centre using the details at the bottom of the page.

• Documentation: Make sure you have read and understood all instructions

and warnings in this manual. Refer to the Product Overview, opposite, to

familiarise yourself with the product and identify all parts. Pay particular

attention to the safety instructions on the previous pages.

• Assembly: This product comes fully assembled and requires no assembly or

installation. It is intended solely for portable use. (Portable appliances are not

suitable for use in a bathroom.).

Getting Started

8After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Getting Started (Cont.)

Control panel

NOTE:

Due to continued product improvement, images and illustrations in this manual

may vary slightly from the product purchased. All images in this manual are for

reference purposes only. Parts are not necessarily pictured to scale.

Controls:

1 Indicator light

2 Thermostat Dial

3 Thermostat minimum position

4 Thermostat maximum position

5 Function Control Dial

6 Function Control Dial Settings:

– OFF: [ 0]

– Fan only: [ ]

– Low: [ 1 ]

– High: [ 2 ]

After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Operating Instructions

Using the heater

Location

• Place the heater in an upright position on a firm, level, dry and heat-resistant

surface, taking into considering all relevant safety information on the

previous pages.

• Ensure that there is a minimum space of 50cm from the wall, fixtures and

other appliances and at least 1.5m at the front of the heater to exclude the

risk of fire.

• Do not place the heater in a hot, wet or very damp environment or in the

vicinity of flammable materials.

• The mains socket must be easily accessible so that in an emergency the

mains power cable can be easily disconnected.

Connection

• Plug the heater into a suitable power point and switch on power to the outlet.

• Always use a separate socket that has no other high wattage appliances

connected at the same time – do not plug it into a power board or socket

adaptor; do not use an extension cord.

FIRST USE

As the appliance and heating coils are supplied with a thin ﬁlm of grease,

there might be a small amount of smoke and odour the ﬁrst time the

appliance is used. This is not harmful to humans and will stop after a short

while. Please ensure meanwhile that there is sufficient ventilation.

NOTE: This smoke may adversly affect the health of birds and some small

pets, so it is reccomended that this heater not be used around birds or

small pets during its initial use until the smoke and odour dissipate.

Switching on/off

• To turn the device on, set the function control dial to either the “1” (low) or

“2” (high) position. Use the higher setting (1700W) to raise the temperature

quickly. When the desire temperature has been reached, turn the dial to

the “1” setting, which should - in most cases - be sufficient to maintain a

comfortable temperature.

• To switch the device off, turn the dial to the “0” (OFF) position before

unplugging the heater. The heater should always be unplugged when not in

use.

10 After Sales Support

(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support

Oscillation control

• To switch on the oscillation feature, press the [ I ] side of the oscillation

control switch, located at the base of the appliance.

• To switch off the oscillation feature, press the [ O ] side of the oscillation

control switch located at the base of the appliance.

Operating Instructions (Cont.)

Setting the thermostat

• After the heater has been switched on and the room as reached the desired

temperature, slowly rotate the thermostat knob counter-clockwise until the

heater shuts off (there will be a faint “click” sound).

• By turning the thermostat at this setting, the temperature will be

automatically maintained.

• To lower the temperature, turn the knob counter-clockwise (towards the

minimum position).

• To raise the temperature, turn the knob clockwise (towards the maximum

position).

Fan-only mode

• To switch on the fan-only operating mode, turn the ON/OFF/Power Level

dial to the fan [ ] setting.

• Turn the thermostat knob fully clockwise so that the fan will run

continuously.

Inhaltsverzeichnis

Andere Click Heizung Handbücher

Click

Click CTH-2300R Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung